Taconic TRF-45 2-Layer 0.9mm Immersion Gold PCB – Satellite & GPS Antenna
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
The TRF-45 laminated materials represent a new generation of low-loss, thermally-stable laminated material from Taconic Advanced Dielectric Division. TRF-45 is woven-glass reinforced for enhanced dimensional-stability and coupled with Taconic's expertise in ceramic technology. It exhibits low and consistent Z-axis expansion across a wide range of temperature including and up to soldering conditions.
TRF-45 can be sheared, drilled and plated using standard methods for PTFE woven fibre-glass materials.
This 2-layer rigid PCB is constructed entirely with TRF-45 as the core material, providing excellent signal integrity, thermal stability, and low-loss performance for demanding RF and antenna applications.
Stable Dielectric constant (Dk) of 4.5 ± 0.15 at 10GHz over temperature and frequency
X-axis CTE of 9 ppm/°C, Y-axis CTE of 9 ppm/°C, Z-axis CTE of 40 ppm/°C (50°C to 150°C)
Low-loss for excellent high-frequency performance
Thermally stable across wide temperature range
Low and consistent Z-axis expansion up to soldering conditions
Enhanced dimensional stability due to woven-glass reinforcement
Can be processed using standard PTFE woven fiberglass methods (shearing, drilling, plating)
Stable dielectric constant over temperature and frequency
Copper_layer_1 – 35 μm TRF-45 Core – 0.813 mm (32 mil) Copper_layer_2 – 35 μm
Components: 42 Total Pads: 38 Thru Hole Pads: 25 Top SMT Pads: 13 Bottom SMT Pads: 0 Vias: 15 Nets: 2
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
9.TRF-45 Low-Loss Ceramic-Filled PTFE – Product Introduction
The TRF range of laminated materials represent a new generation of low-loss, thermally-stable laminated material from Taconic Advanced Dielectric Division.
TRF is woven-glass reinforced for enhanced dimensional-stability and coupled with Taconic's expertise in ceramic technology. TRF exhibits low and consistent Z-axis expansion across a wide range of temperature including and up to soldering conditions.
Can be processed using standard PTFE woven fiberglass methods
13.Standard Thicknesses, Panel Sizes & Claddings
Application areas
- Low-loss ceramic-filled PTFE
- Dissipation factor of 0.0035 at 10GHz
- Moisture absorption of 0.06%
- Thermal conductivity of 0.43 W/mk
- Flammability of UL 94-V0
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
