Rogers TMM6 2-Layer 50mil EPIG PCB – Microwave & Stripline Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- MOQ
- 1PCS
- Lead time
- 7-13 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
Rogers TMM6 thermoset microwave material is a ceramic thermoset polymer composite designed for high plated thru-hole reliability stripline and microstrip applications. TMM 6 laminates offer a combination of the benefits of both ceramic and traditional PTFE microwave circuit laminates without requiring the specialized production techniques common to those materials, all at a unique dielectric constant (Dk) compared to other materials in the product family.
This 2-layer rigid PCB is constructed entirely with TMM6 as the core material, making it ideal for demanding RF and microwave circuitry, power amplifiers, filters, satellite communication systems, and GPS antennas. The EPIG (Nickel-free) surface finish ensures excellent solderability and wire-bonding reliability.
Dielectric constant (Dk) of 6.0 ± 0.08 at 10GHz
CTE matched to copper (18 ppm/K, 18 ppm/K, 26 ppm/K)
Decomposition Temperature (Td): 425 °C TGA
Resistant to process chemicals, reducing damage during fabrication
Based on thermoset resin, allowing for reliable wire-bonding
All common PCB processes can be used with TMM6 materials
Mechanical properties resist creep and cold flow
Exceptional Dk uniformity and tight tolerance (6.0 ± 0.08) for consistent impedance control
Low dissipation factor (0.0023) ensures high performance at microwave frequencies
CTE matched to copper enables high reliability plated through holes
High thermal conductivity (0.72 W/m/K) facilitates heat removal
Thermoset resin does not soften when heated, preventing pad lifting during wire bonding
5. PCB Stackup (2-Layer Rigid Structure)
7. Rogers TMM6 Material – Product Introduction
Rogers TMM® 6 thermoset microwave material is a ceramic thermoset polymer composite designed for high plated thru-hole reliability stripline and microstrip applications. TMM 6 laminates offer a combination of the benefits of both ceramic and traditional PTFE microwave circuit laminates without requiring the specialized production techniques common to those materials, all at a unique dielectric constant (Dk) compared to other materials in the product family.
TMM6 laminates have an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. The material's isotropic coefficients of thermal expansion, very closely matched to copper, allow for production of high reliability plated through holes, and low etch shrinkage values. Furthermore, the thermal conductivity of TMM laminates is approximately twice that of traditional PTFE/ceramic laminates, facilitating heat removal. TMM6 laminates are based on thermoset resins, and do not soften when heated, enabling reliable wire bonding without pad lifting or substrate deformation.
Global Positioning Systems (GPS) Antennas
Type of artwork supplied: Gerber RS-274-X
12. Standard Thicknesses, Panel Sizes & Claddings
Application areas
- Dielectric constant (Dk) of 6.0 ± 0.08 at 10GHz
- Dissipation factor of 0.0023 at 10GHz
- Thermal coefficient of Dk: -11 ppm/°K
- CTE matched to copper (18 ppm/K, 18 ppm/K, 26 ppm/K)
- Decomposition Temperature (Td): 425 °C TGA
- Thermal Conductivity: 0.72 W/m/K
- Resistant to process chemicals, reducing damage during fabrication
- Based on thermoset resin, allowing for reliable wire-bonding
- All common PCB processes can be used with TMM6 materials
PCB specifications
Layer stack-up
- Copper_layer_1 (Top) · Copper · 35 μm (1 oz)copper
- Dielectric · Rogers TMM6 Core · 1.27 mm (50mil)core
- Copper_layer_2 (Bottom) · Copper · 35 μm (1 oz)copper
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
