BICHENGPCBBicheng Technologies Limited

Rogers TMM13i 2-Layer 20mil ENIG High Frequency PCB for Microwave & RF Applications

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

MOQ
1PCS
Lead time
7-13 working days
Packaging
Vacuum / Anti-static Packaging
Payment
T/T, Paypal

Brief introduction

1. Introduction to TMM13i High Frequency PCB

The Rogers TMM13i isotropic thermoset microwave material is a ceramic thermoset polymer composite tailored for high reliability in plated thru-hole strip-line and micro-strip applications. It features an isotropic dielectric constant (Dk) and integrates the advantageous properties of both ceramic and PTFE substrates, while allowing for the convenience of soft substrate processing methods.

TMM13i laminates combine many of the benefits of both ceramic and traditional PTFE microwave circuit laminates without requiring the specialized production techniques common to those materials. TMM laminates are based on thermoset resins, making them reliable for wire-bonding without pad lifting or substrate deformation.

This 2-layer rigid PCB is constructed entirely with TMM13i as the core material at 20mil (0.508mm) thickness, with ENIG surface finish, white top silkscreen, and 1oz copper on both sides. Its DK of 12.85 offers excellent high-frequency performance, making it ideal for demanding applications such as chip testers, dielectric polarizers, filters, couplers, RF and microwave circuitry, and satellite communication systems.

Dielectric Constant (DK): 12.85 ± 0.35 at 10GHz

Dielectric Constant (Design): 12.2 (8 GHz - 40 GHz)

Dissipation Factor (Df): 0.0019 at 10GHz

Thermal Coefficient of DK (TCDK): -70 ppm/°K (-55°C to +125°C)

CTE matched to copper: X-axis 19 ppm/°C, Y-axis 19 ppm/°C, Z-axis 20 ppm/°C (-55°C to 288°C)

ENIG (Electroless Nickel Immersion Gold) finish

Finished board thickness: 0.6mm (20mil core + copper)

Lead-Free Process Compatible, UL 94V-0 flammability

Stable DK (12.85±0.35) — Consistent impedance control for high-frequency designs

Low Df (0.0019 @ 10GHz) — Excellent high-frequency performance with minimal signal loss

CTE Matched to Copper (19/19/20 ppm/°C) — High reliability plated through holes, dimensional stability

Thermoset Resin — No softening when heated, reliable wire-bonding without pad lifting or substrate deformation

Excellent Mechanical Properties — Resist creep and cold flow

Chemical Resistance — Resistant to etchants and solvents used in PCB production

No Sodium Napthanate Treatment Required — Simplified electroless plating process

ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability

Lead-Free Process Compatible — Suitable for modern assembly processes

5. PCB Stackup (2-Layer Rigid Structure)

Rogers TMM13i Substrate – 0.508 mm (20mil)

7. Rogers TMM13i Material – Product Introduction

TMM laminates have an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. The material's isotropic coefficients of thermal expansion, very closely matched to copper, allow for production of high reliability plated through holes, and low etch shrinkage values. Furthermore, the thermal conductivity of TMM laminates is approximately twice that of traditional PTFE/ceramic laminates, facilitating heat removal.

TMM laminates are based on thermoset resins, and do not soften when heated. As a result, wire bonding of component leads to circuit traces can be performed without concerns of pad lifting or substrate deformation.

TMM laminates combine many of the desirable features of ceramic substrates with the ease of soft substrate processing techniques. TMM laminates are available clad with 1/2 oz/ft² to 2 oz/ft² electrodeposited copper foil, or bonded directly to brass or aluminum plates. Substrate thicknesses of 0.015" to 0.500" are available. The base substrate is resistant to etchants and solvents used in printed circuit production. Consequently, all common PWB processes can be used to produce TMM thermoset microwave materials.

9. TMM13i Typical Properties (Data Sheet)

Stripline and microstrip applications requiring high plated thru-hole reliability

Type of artwork supplied: Gerber RS-274-X

No sodium napthanate treatment required prior to electroless plating

12. Standard Thickness, Panel Sizes & Claddings

Prolonged exposure in an oxidative environment may cause changes to the dielectric properties of hydrocarbon based materials. The rate of change increases at higher temperatures and is highly dependent on the circuit design. Rogers recommends that the customer evaluate each material and design combination to determine fitness for use over the entire life of the end product.

The design Dk is an average number from several different tested lots of material and on the most common thickness/s. For more detailed information, please contact Rogers Corporation.

All test data are typical measurement values intended to assist customers in material selection. They do not constitute any express or implied warranty and do not guarantee performance in specific applications. Customers are responsible for verifying the suitability of Rogers materials for each application.

Application areas

  • Dielectric Constant (DK): 12.85 ± 0.35 at 10GHz
  • Dielectric Constant (Design): 12.2 (8 GHz - 40 GHz)
  • Dissipation Factor (Df): 0.0019 at 10GHz
  • Thermal Coefficient of DK (TCDK): -70 ppm/°K (-55°C to +125°C)
  • ENIG (Electroless Nickel Immersion Gold) finish
  • White top silkscreen, no solder mask
  • Board dimensions: 89.65mm x 45.27mm
  • Finished board thickness: 0.6mm (20mil core + copper)
  • Lead-Free Process Compatible, UL 94V-0 flammability
TMM13i 2-Layer 20mil ENIG High Frequency PCB
TMM13i Material

PCB specifications

Base materialRogers TMM13i (Ceramic Thermoset Polymer Composite)
Layer count2-layer rigid PCB
Board dimensions89.65mm x 45.27mm = 1 PCS
Minimum Trace/Space5/8 mils
Minimum Hole Size0.25mm
Blind viasNo
Finished board thickness0.6mm
Finished Cu weight1 oz (35 μm / 1.4 mils) all layers
Via plating thickness20 μm
Surface finishENIG (Electroless Nickel Immersion Gold)
Top Solder MaskNo
Bottom Solder MaskNo
Top SilkscreenWhite
Bottom SilkscreenNo
Quality standardIPC-Class-2
100% Electrical testUsed prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com