Rogers RT/duroid 6035HTC 2-Layer 30mil High Thermal Conductivity PCB with Immersion Silver
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- MOQ
- 1PCS
- Lead time
- 6-10 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
Rogers RT/duroid 6035HTC high frequency circuit materials are ceramic filled PTFE composites for use in high power RF and microwave applications. They are an exceptional choice for high power applications. The laminates have a thermal conductivity of almost 2.4 times the standard RT/duroid 6000 products, and copper foil (ED and reverse treat) with excellent long term thermal stability. Additionally, Rogers advanced filler system enables excellent drill-ability, reducing drilling costs as compared to standard high thermally conductive laminates that use alumina fillers.
DK of 3.5 +/- 0.05 at 10 GHz/23°C Dissipation factor of 0.0013 at 10 GHz/23°C Thermal Coefficient of dielectric constant of -66 ppm/°C Moisture Absorption 0.06% Thermal Conductivity of 1.44 W/m/K at 80°C CTE in X-axis of 19 ppm/°C, Y-axis of 19ppm/°C and Z-axis of 39ppm/°C
High Thermal conductivity (1.44 W/m/K) - 2.4x higher than standard RT/duroid 6000 products Improved dielectric heat dissipation enables lower operating temperatures for high power applications Excellent high frequency performance with low dissipation factor (0.0013) Lower insertion loss and excellent thermal stability of traces Advanced filler system enables excellent drill-ability, reducing drilling costs Copper foil options with excellent long term thermal stability
Copper layer 1 – 35 μm RT/duroid 6035HTC – 0.762 mm (30mil) Copper layer 2 – 35 μm
Components: 31 Total Pads: 104 Thru Hole Pads: 73 Top SMT Pads: 31 Bottom SMT Pads: 0 Vias: 86 Nets: 2
High power RF and microwave amplifiers Power amplifiers, couplers, filters, combiners, power dividers
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
