Rogers RO4725JXR 2-Layer 60.7mil High-Frequency Antenna PCB with Immersion Gold
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO4725JXR Hydrocarbon / Ceramic / Woven Glass antenna grade laminates are a reliable, low-cost alternative to conventional PTFE-based laminates.
The resin systems of RO4725JXR dielectric materials provide the necessary properties for ideal antenna performance. RO4725JXR antenna grade laminates are fully compatible with conventional FR-4 and high temperature lead-free solder processing. These materials do not require the special treatment needed on traditional PTFE-based laminates for plated through-hole preparation. RO4725JXR laminates are an affordable alternative to conventional PTFE-based antenna materials, allowing for designers to optimize cost and performance.
RO4725JXR laminates have the mechanical and electrical properties that antenna designers need. The laminates have a dielectric constant (Dk) of 2.55 and a loss tangent (Df) of 0.0022 measured at 2.5 GHz when using LoPro Reverse Treated EDC Foil. These values allow antenna designers to realize substantial gain values while minimizing signal loss. Materials are available with a demonstrated low PIM performance, with values better than -160 dBc (43dBm 1,900MHz signal).
Dielectric Constant of DK 2.55 +/-0.05 at 10GHz/23°C Dissipation Factor of 0.0026 at 10GHz/23°C and 0.0022 at 2.5GHz Excellent Thermal Coefficient of Dielectric Constant +34 ppm/°C CTE matched to copper with X axis of 13.9 ppm/°C, Y axis of 19 ppm/°C, Z axis of 25.6 ppm/°C High Tg value of >280 °C Perfect PIM value of -166 dBc
Low loss dielectric with low profile foil Low insertion loss Dk matched to standard PTFE based antenna offerings Reduced passive inter-modulation (PIM) Consistent circuit performance
Copper layer 1 – 35 µm Rogers RO4725JXR Core – 1.542 mm (60.7mil) Copper layer 2 – 35 µm
Components: 25 Total Pads: 150 Thru Hole Pads: 92 Top SMT Pads: 58 Bottom SMT Pads: 0 Vias: 131 Nets: 2
Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
