Rogers RO4003C and FR-4 4-Layer 1.4mm High Frequency RF Microwave PCB ENIG
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
1.Introduction to RO4003C + FR-4 4-Layer Hybrid PCB
This 4-layer rigid hybrid PCB is constructed with Rogers RO4003C and High Tg FR-4 (TG175) as the base materials. RO4003C hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes offered at competitive prices. RO4003C material possesses the properties needed by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. Low dielectric loss allows RO4003C to be used in many applications where higher operating frequencies limit the use of conventional circuit board laminates. The board features immersion gold (ENIG) surface finish with 2 microinches gold thickness, green solder mask, white silkscreen, 25μm via plating thickness, IPC-Class-3 quality standard, and controlled depth routing. The finished board thickness is 1.4mm with board dimensions of 200mm x 115mm.
Dielectric constant (process): 3.38 ±0.05 at 10 GHz / 23°C Dielectric constant (design): 3.55 at 8 to 40 GHz Dissipation factor: 0.0027 at 10 GHz / 23°C, 0.0021 at 2.5 GHz / 23°C Thermal coefficient of Dk: +40 ppm/°C (-50 to 150°C) Volume resistivity: 1.7 x 10¹⁰ MΩ·cm (COND A) Surface resistivity: 4.2 x 10⁹ MΩ (COND A) Electrical strength: 31.2 KV/mm (780 V/mil) at 0.51mm Tensile modulus X: 19,650 MPa (2,850 ksi) at RT Tensile modulus Y: 19,450 MPa (2,821 ksi) at RT Tensile strength X: 139 MPa (20.2 ksi) at RT Tensile strength Y: 100 MPa (14.5 ksi) at RT Flexural strength: 276 MPa (40 kpsi) Dimensional stability: <0.3 mm/m after etch + E2/150°C CTE X-axis: 11 ppm/°C (-55 to 288°C) CTE Y-axis: 14 ppm/°C (-55 to 288°C) CTE Z-axis: 46 ppm/°C (-55 to 288°C) Tg: >280°C (TMA method) Td: 425°C (TGA method) Thermal conductivity: 0.71 W/m/°K at 80°C Moisture absorption: 0.06% (48 hrs immersion, 50°C, 0.060" sample) Density: 1.79 g/cm³ at 23°C Copper peel strength: 1.05 N/mm (6.0 pli) after solder float, 1 oz EDC foil Lead-free process compatible: Yes
RO4003C hydrocarbon ceramic provides low dielectric loss for high frequency performance FR-4 process compatible with standard epoxy/glass fabrication techniques No specialized via preparation such as sodium etch required CTE matched to copper for excellent dimensional stability Low Z-axis CTE (46 ppm/°C) provides reliable plated through-hole quality even in severe thermal shock applications Tg >280°C ensures stable expansion characteristics over entire circuit processing temperature range Low moisture absorption (0.06%) for consistent electrical performance High thermal conductivity (0.71 W/m/°K) for efficient heat dissipation ENIG surface finish with 2μ" gold provides excellent solderability and corrosion resistance IPC-Class-3 quality for high-reliability applications Controlled depth routing for precise mechanical features
4.RO4003C + FR-4 4-Layer Hybrid PCB Construction Details
Copper layer 1 (Top): 1 oz (Finished copper) Dielectric layer 1: RO4003C Copper layer 2 (Inner layer 1): 0.5 oz Dielectric layer 2: Prepreg / Bondply Copper layer 3 (Inner layer 2): 0.5 oz Dielectric layer 3: High Tg FR-4 TG175 Copper layer 4 (Bottom): 1 oz (Finished copper)
Cellular base station antennas and power amplifiers Automotive radar and sensors RF identification tags LNBs for direct broadcast satellites Microstrip and stripline circuits Millimeter wave applications Point to point digital radio antennas Broadband applications
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
8.RO4003C High-Frequency Laminate – Product Introduction
RO4000 hydrocarbon ceramic laminates are designed to offer superior high frequency performance and low cost circuit fabrication. The result is a low loss material which can be fabricated using standard epoxy/glass (FR-4) processes offered at competitive prices. The selection of laminates typically available to designers is significantly reduced once operational frequencies increase to 500 MHz and above. RO4000 material possesses the properties needed by designers of RF microwave circuits, matching networks, and controlled impedance transmission lines. Low dielectric loss allows RO4000 series material to be used in many applications where higher operating frequencies limit the use of conventional circuit board laminates. The temperature coefficient of dielectric constant is among the lowest of any circuit board material, and the dielectric constant is stable over a broad frequency range, making it an ideal substrate for broadband applications. RO4000 material's thermal coefficient of expansion (CTE) is similar to that of copper which allows the material to exhibit excellent dimensional stability, a property needed for mixed dielectric multi-layer boards constructions. The low Z-axis CTE of RO4000 laminates provides reliable plated through-hole quality, even in severe thermal shock applications. RO4000 series material has a Tg of >280°C (536°F) so its expansion characteristics remain stable over the entire range of circuit processing temperatures. RO4000 series laminates can easily be fabricated into printed circuit boards using standard FR-4 circuit board processing techniques. Unlike PTFE based high performance materials, RO4000 series laminates do not require specialized via preparation processes such as sodium etch. This material is a rigid, thermoset laminate that is capable of being processed by automated handling systems and scrubbing equipment used for copper surface preparation. RO4003C laminates are currently offered in various configurations utilizing both 1080 and 1674 glass fabric styles, with all configurations meeting the same laminate electrical performance specification.
Benefits: Low dielectric loss allows higher operating frequencies FR-4 process compatible with standard epoxy/glass fabrication No specialized via preparation (no sodium etch required) CTE matched to copper for excellent dimensional stability Low Z-axis CTE for reliable plated through-hole quality Tg >280°C for stable expansion characteristics over entire processing temperature range Rigid thermoset laminate compatible with automated handling systems Ideal for broadband applications
12.What is a Hybrid PCB (High-Frequency Hybrid PCB)?
A hybrid PCB, also known as a mixed dielectric PCB, combines two or more different types of laminate materials in a single board construction. In this product, Rogers RO4003C (high-frequency hydrocarbon ceramic) is combined with High Tg FR-4 (TG175). This allows designers to place high-frequency circuits on RO4003C layers for optimal RF performance while using lower-cost FR-4 for non-critical layers, balancing performance and cost.
Advantages of Hybrid PCBs: Cost optimization by using expensive high-frequency materials only where needed Improved thermal management Ability to combine different CTE materials in one board Flexibility in design for complex multi-layer structures
Disadvantages of Hybrid PCBs: More complex fabrication process requiring careful material matching Potential registration challenges between different material types Different material shrinkage rates may affect dimensional stability
Storage: Fully clad RO4003C laminates should be stored at room temperature between 50-90°F (10-32°C).
Inner Layer Preparation: RO4003C laminates are compatible with many pinned and pinless tooling systems. Copper surfaces can be prepared for photo imaging using chemical or mechanical processes. RO4003C materials are compatible with most liquid and dry film photo-resists and can be processed through develop, etch, and strip (DES) systems typically used to process FR-4 materials.
Multi-Layer Bonding: RO4003C laminates are compatible with many thermosetting and thermoplastic adhesive systems.
Drilling: Standard entry and exit materials can be used. Drilling speeds greater than 500 surface feet per minute (SFM) should be avoided. Standard geometry drills are preferred. Hole wall roughness ranging from 8 to 25 μm is expected.
PTH Processing: Desmear is typically not required for double-sided boards as the high Tg (>280°C) minimizes smear. If desmear is required, alkaline permanganate or CF4/O2 plasma process may be used. RO4003C materials do not require special treatments prior to metallization.
Final Metal Finishes: RO4003C laminates are compatible with OSPs, HASL, and most chemically deposited or electroplated finishes including ENIG.
Routing: RO4003C laminates are routed using carbide tools and conditions typical to processing traditional epoxy/glass materials.
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
