Rogers RO3010 2-Layer 50mil High-Dk Ceramic PTFE PCB with EPIG Nickel-Free Finish
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO3010 advanced circuit materials are ceramic-filled PTFE composites that offer a higher dielectric constant with excellent stability. They are competitively priced products with exceptional mechanical and electrical stability. This stability simplifies the design of broadband components and allows the materials to be used in a wide range of applications over a very broad range of frequencies. This material's characteristics make RO3010 laminates excellent for circuit miniaturization.
Dielectric constant of 10.2 +/- .30 at 10 GHz/23°C
Dissipation factor of 0.0022 at 10 GHz/23°C
Low Coefficient of Thermal Expansion (-55 to 288 °C): 13 ppm/°C (X), 11 ppm/°C (Y), 16 ppm/°C (Z)
Material exhibits dimensional stability with expansion coefficient matched to copper
Economical laminate pricing for volume manufacturing processes
Suitable for use with multi-layer board designs
Excellent for circuit miniaturization due to high dielectric constant
Stable electrical performance across wide frequency range
Copper layer 1 – 35 μm Rogers RO3010 Substrate – 1.27 mm (50mil) Copper layer 2 – 35 μm
Components: 21Total Pads: 45Thru Hole Pads: 31Top SMT Pads: 14Bottom SMT Pads: 0Vias: 29Nets: 2
Automotive radar applicationsGlobal positioning satellite antennasCellular telecommunications systems – power amplifiers and antennasPatch antenna for wireless communicationsDirect broadcast satellitesDatalink on cable systemsRemote meter readersPower backplanes
Artwork supplied: Gerber RS-274-XAccepted standard: IPC-Class-2Availability: Worldwide
8.RO3010™ High Frequency Laminate – Product Introduction
RO3010™ laminates are ceramic-filled PTFE composites designed for commercial microwave and RF applications. RO3010 laminates offer a dielectric constant of 10.2 and are an ideal solution for circuit miniaturization at a very competitive price.
RO3010 laminates have excellent mechanical properties and consistent electrical properties. This consistency greatly simplifies the design of wide bandwidth components and allows the material to be used across a broad range of frequencies. The properties of this material make it an ideal choice for circuit miniaturization.
Excellent dimensional stability, coefficient of thermal expansion matched to copper
Suitable for multi-layer board designs, can be used in hybrid constructions with different dielectric constants
Low dielectric loss, can be used in applications up to 77 GHz
12.Standard Thicknesses, Panel Sizes & Claddings
Application areas
- Dielectric constant of 10.2 +/- .30 at 10 GHz/23°C
- Dissipation factor of 0.0022 at 10 GHz/23°C
- Td > 500°C
- Thermal Conductivity of 0.95 W/mK
- Moisture Absorption of 0.05%
- -40°C to +85°C operation
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
