Rogers RO3003 4-Layer 0.8mm Immersion Silver PCB – RF & Microwave Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- MOQ
- 1PCS
- Lead time
- 7-10 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
Rogers RO3003 high frequency laminates are ceramic-filled PTFE composites designed for commercial microwave and RF applications. This material offers exceptional electrical and mechanical stability at competitive prices, making it an ideal choice for a wide range of high-frequency designs.
The RO3003 laminate exhibits a dielectric constant of 3.00 ± 0.04 at 10 GHz, with very stable performance over temperature. Its dissipation factor of 0.0010 at 10 GHz ensures low signal loss, even at higher frequencies.
RO3003 materials feature a coefficient of thermal expansion (CTE) in the X and Y axes of 17 ppm/°C, closely matched to that of copper. This matching provides excellent dimensional stability, with typical etch shrinkage of less than 0.5 mils per inch. The Z-axis CTE of 24 ppm/°C ensures outstanding plated through-hole reliability, even in severe thermal environments.
This 4-layer rigid PCB combines RO3003 as the top core with FR-4 materials in a hybrid stack-up, optimizing both RF performance and mechanical rigidity for cost-effective, high-reliability applications.
Dielectric constant of 3.00 ± 0.04 at 10 GHz
Thermal coefficient of dielectric constant (TCDk) of -3 ppm/°C
CTE in X-axis of 17 ppm/°C, Y-axis of 16 ppm/°C, Z-axis of 25 ppm/°C
Stable electrical and mechanical properties across temperature variations
Excellent dimensional stability matched to copper
Reliable plated through-hole performance in thermal cycling
Compatible with standard PTFE circuit board processing techniques
Enables hybrid multilayer designs with different dielectric constants without warpage
Low loss for high-frequency signal integrity
5. PCB Stackup (4-Layer Hybrid Rigid Structure)
High-reliability aerospace and defense electronics
8. RO3003 High Frequency Laminates Introduction
RO3003 is a ceramic-filled PTFE composite intended for use in commercial microwave and RF applications. The RO3000 series was designed to offer exceptional electrical and mechanical stability at competitive prices.
RO3003 laminates have mechanical properties that are consistent regardless of the dielectric constant selected. This allows designers to develop multilayer board designs using different dielectric constant materials for individual layers without encountering warpage or reliability problems.
The material exhibits a CTE in the X and Y axes of 17 ppm/°C, matched to that of copper, which provides excellent dimensional stability. The Z-axis CTE of 24 ppm/°C offers exceptional plated through-hole reliability, even in severe thermal environments. The dielectric constant versus temperature is very stable.
RO3003 laminates can be fabricated into printed circuit boards using standard PTFE circuit board processing techniques, with minor modifications as described in Rogers' fabrication guidelines.
Dielectric constant: 3.00 ± 0.04 at 10 GHz
Stable electrical performance over temperature
Reliable plated through-hole performance
Compatible with standard PTFE processing
Enables hybrid multilayer designs without warpage
12. Standard Thicknesses, Panel Sizes & Claddings
24" × 21" (610 mm × 533 mm) – for 0.005" and 0.010" RO3003
Electrodeposited Copper Foil: ½ oz (18 μm), 1 oz (35 μm)
Rolled Copper Foil: ½ oz (18 μm), 1 oz (35 μm)
Additional configurations including other thicknesses, panel sizes, and claddings are available upon request.
Application areas
- Dielectric constant of 3.00 ± 0.04 at 10 GHz
- Dissipation factor of 0.0010 at 10 GHz
- Thermal coefficient of dielectric constant (TCDk) of -3 ppm/°C
- Low moisture absorption of 0.04%
- CTE in X-axis of 17 ppm/°C, Y-axis of 16 ppm/°C, Z-axis of 25 ppm/°C
- Thermal conductivity of 0.50 W/(m·K)
- Decomposition temperature (Td) of 500°C
- UL 94 V-0 flammability rating
- Lead-free process compatible
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
