RO4730G3 2-Layer 20mil ENIG PCB for Base Station Antennas
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers RO4730G3 is hydrocarbon/ceramic/woven glass UL 94 V-0 antenna grade laminates that are a reliable, low-cost alternative to conventional PTFE-based laminates. The resin systems of RO4730G3 dielectric materials provide the necessary properties for ideal antenna performance. RO4730G3 antenna grade laminates are fully compatible with conventional FR-4 and high temperature lead-free solder processing. These materials do not require the special treatment needed on traditional PTFE-based laminates for plated through-hole preparation. RO4730G3 laminates are an affordable alternative to conventional PTFE-based antenna materials, allowing designers to optimize cost and performance.
Stable Dielectric Constant: 3.0 ±0.05 at 10GHz Loss Characteristics: Dissipation factor of 0.0028 at 10GHz Thermal Stability: Thermal coefficient of Dk of 34 ppm/°C Excellent CTE Match: Coefficient of thermal expansion matched to copper High Temperature Resistance: Tg >280°C, Td of 411°C Dimensional Stability: CTE x/y/z: 15.9 ppm/°C, 14.4 ppm/°C, 35.2 ppm/°C Thermal Management: Thermal conductivity of 0.45W/mk
Superior RF Performance: Low loss dielectric with low profile foil, reduced PIM, low insertion loss Lightweight Design: Unique filler/closed microspheres, 30% lighter than PTFE/Glass Enhanced Reliability: Low Z-axis CTE <30ppm/°C, High Tg >280°C Design Flexibility: Automated assembly compatible, consistent circuit performance Manufacturing Advantages: Ease of fabrication, PTH process capability Environmental Compliance: Lead-free process compatibility, RoHS compliant
5. PCB Stackup (2-Layer Rigid Structure)
Copper_layer_1 - 35 μmRogers RO4730G3 Core - 0.508 mm (20mil)Copper_layer_2 - 35 μm
Components: 41Total Pads: 88Thru Hole Pads: 61Top SMT Pads: 27Bottom SMT Pads: 0Vias: 97Nets: 2
Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
