BICHENGPCBBicheng Technologies Limited

RO4003C Multilayer PCB 4-Layer 4.8mm Thick Low Loss Material for Microstrip and Stripline Circuits

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

Rogers RO4003C materials are advanced woven glass reinforced hydrocarbon/ceramic composites that combine the electrical performance characteristics of PTFE/woven glass with the manufacturability of epoxy/glass. This innovative design provides superior high-frequency performance and facilitates low-cost circuit fabrication. The result is a low-loss material that can be produced using standard epoxy/glass (FR-4) processes, all at competitive prices.

RO4003C materials are ideal for RF microwave circuit designers and are particularly suited for matching networks and controlled impedance transmission lines. The low dielectric loss of RO4003C allows it to be utilized in many applications where conventional circuit board laminates are limited by higher operating frequencies.

Available in various configurations, RO4003C laminates are manufactured using both 1080 and 1674 glass fabric styles, ensuring that all configurations meet the same electrical performance specifications. Importantly, RO4003C materials are non-brominated and do not carry a UL 94 V-0 rating.

Dielectric Constant: DK 3.38 ± 0.05 at 10 GHz Dissipation Factor: 0.0027 at 10 GHz Thermal Conductivity: 0.71 W/m·K Thermal Coefficient of Dielectric Constant: +40 ppm/°C, ranging from -50°C to 150°C CTE Matched to Copper: X-axis: 11 ppm/°C Y-axis: 14 ppm/°C Z-axis Coefficient of Thermal Expansion: 46 ppm/°C Glass Transition Temperature (Tg): > 280°C Low Moisture Absorption: 0.06%

Commercial airline broadband antennasMicrostrip and stripline circuitsMillimeter-wave applicationsRadar systemsGuidance systemsPoint-to-point digital radio antennas

RO4003C Multilayer PCB 4-Layer 4.8mm Thick

PCB specifications

Dielectric ConstantDK 3.38 ± 0.05 at 10 GHz
Dissipation Factor0.0027 at 10 GHz
Thermal Conductivity0.71 W/m·K
X-axis11 ppm/°C
Y-axis14 ppm/°C
Z-axis Coefficient of Thermal Expansion46 ppm/°C
Glass Transition Temperature (Tg)> 280°C
Low Moisture Absorption0.06%
Copper Layer 135 µm
RO4003C0.508 mm (20 mil)
PrepregRO4450F 0.203 mm (8 mil)
RO4003C1.524 mm (60 mil)
Copper Layer 235 µm
PrepregRO4450F 0.203 mm (8 mil)
RO4003C1.524 mm (60 mil)
Copper Layer 335 µm
PrepregRO4450F 0.203 mm (8 mil)
RO4003C0.508 mm (20 mil)
Copper Layer 435 µm
Board Dimensions65 mm x 65 mm (1 piece), ± 0.15 mm
Minimum Trace/Space7/8 mils
Minimum Hole Size0.5 mm
Blind ViasNone
Finished Board Thickness4.8 mm
Finished Copper Weight1 oz (1.4 mils) for inner/outer layers
Via Plating Thickness20 µm
Surface FinishENEPIG
Top SilkscreenNone
Bottom SilkscreenNone
Top Solder MaskNone
Bottom Solder MaskNone
Countersunk HolesYes
Electrical Testing100% electrical test performed prior to shipment
Components6
Total Pads11
Through Hole Pads5
Top SMT Pads6
Bottom SMT Pads0
Vias5
Nets4
Type of Artwork SuppliedGerber RS-274-X
Accepted StandardIPC-Class-2
AvailabilityWorldwide

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com