RO3003G2 2-Layer PCB 0.2mm Thin Board with Immersion Gold for Automotive Radar Applications
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
RO3003G2 high-frequency laminates represent Rogers' advanced solution for millimeter-wave automotive radar needs. Developed based on industry feedback, these ceramic-filled PTFE composites feature: Specially formulated resin/filler system for reduced insertion loss Homogeneous construction with VLP ED copper (16/17/18 ppm/°C CTE) Enhanced thermal stability (-35 ppm/°C Dk coefficient) Ultra-low dielectric loss (0.0011 @10GHz)
This makes RO3003G2 ideal for 77GHz radar modules where signal integrity is critical.
Dielectric Constant (Dk): 3.0 ±0.04 at 10 GHz Dissipation Factor: 0.0011 at 10 GHz Thermal Coefficient of Dk: -35 ppm/°C Thermal Conductivity: 0.50 W/m/K CTE: X: 17 ppm/°C, Y: 16 ppm/°C, Z: 24 ppm/°C Tg: >280°C Moisture Absorption: 0.04% Surface Finish: Immersion Gold (ENIG)
Industry-leading insertion loss performance Minimized Dk variation in finished PCBs Supports high-density via designs Reliable operation in automotive temperature ranges
Copper layer 1 - 35 μm Rogers RO3003G2 Core - 0.127 mm (5mil) Copper layer 2 - 35 μm
Components: 8 Total Pads: 31 Thru Hole Pads: 17 Top SMT Pads: 14 Bottom SMT Pads: 0 Vias: 42 Nets: 2
Adaptive Cruise Control Forward Collision Warning Lane Change Assist 77GHz Automotive Radar Blind Spot Detection
IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
