Isola I-Tera MT40 6-Layer PCB with Resin-Filled Vias, Edge Plating, and ENIG Finish
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
- MOQ
- 1PCS
- Lead time
- 7-10 working days
- Packaging
- Vacuum / Anti-static Packaging
- Payment
- T/T, Paypal
Brief introduction
I-Tera MT40 is a high-performance laminate material developed by Isola Group, specifically designed for high-speed digital and RF/microwave printed circuit applications. It features a dielectric constant (Dk) that remains stable between -55°C and +125°C up to W-band frequencies, ensuring consistent electrical performance across a wide temperature range. With a low dissipation factor (Df) of 0.0031, I-Tera MT40 offers a cost-effective alternative to PTFE and other commercial microwave and high-speed digital laminate materials.
I-Tera MT40 is available in both laminate and prepreg form in typical thicknesses and standard panel sizes, providing a complete materials solution for high-speed digital multilayer, hybrid, RF/microwave, multilayer, and double-sided printed circuit designs. Importantly, I-Tera MT40 does not require any special through-hole treatments commonly needed when processing PTFE-based laminate materials.
2. I-Tera MT40 Key Features and Benefits
Stable Dk 3.45 across -55°C to +125°C up to W-band frequencies ensures consistent impedance control Low Df 0.0031 at 2 GHz minimizes signal loss for high-speed and RF circuits Tg 215°C (DSC) and Td 360°C provide excellent thermal reliability for lead-free assembly T260 >60 minutes ensures robust delamination resistance during thermal stress Z-axis CTE 55 ppm/°C pre-Tg, 290 ppm/°C post-Tg with total expansion of 2.8% for reliable plated through-holes X/Y-axis CTE 12 ppm/°C matched to copper for excellent dimensional stability Thermal conductivity 0.61 W/m·K enables effective heat dissipation Volume resistivity 1.33 × 10⁷ MΩ-cm ensures good insulation performance Peel strength 1.0 N/mm (5.7 lb/inch) for reliable copper adhesion UL 94 V-0 rated for safety compliance No special through-hole treatments required simplifies manufacturing compared to PTFE materials
5. PCB Stackup (6-Layer Rigid Structure)
L1 (Top): 2oz Copper, 5mil traces for 50Ω single-ended impedance control Dielectric: I-Tera MT40 core / RO4450F prepreg layers L2: 1oz Copper Dielectric: I-Tera MT40 core / RO4450F prepreg layers L3: 1oz Copper Dielectric: I-Tera MT40 core / RO4450F prepreg layers L4: 1oz Copper Dielectric: I-Tera MT40 core / RO4450F prepreg layers L5: 1oz Copper Dielectric: I-Tera MT40 core / RO4450F prepreg layers L6 (Bottom): 2oz Copper
Commercial Airborne Antennas and broadband communication systems Microstrip and Stripline Circuits for precision RF designs Millimeter Wave Applications including 5G/6G infrastructure Radar Systems for defense and automotive applications Guidance Systems and aerospace navigation equipment Point-to-Point Digital Radio Antennas for backhaul networks Satellite Communications requiring low outgassing materials Test and Measurement Equipment for high-frequency signal analysis
Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide
8. What is Single-Ended Impedance Control?
Single-ended impedance control refers to the precise management of the characteristic impedance of a signal trace referenced to a ground plane, without a paired differential trace. In high-speed digital and RF designs, signal traces must maintain a consistent impedance—typically 50Ω—to prevent reflections, signal degradation, and electromagnetic interference.
For the 5mil trace on the TOP layer of this PCB, the trace width, dielectric thickness, and material Dk (3.45) are carefully calculated to achieve 50Ω characteristic impedance. This ensures maximum power transfer and minimal signal distortion for high-frequency signals.
Edge plating (also known as side plating or edge metallization) is a process where the perimeter edges of a PCB are plated with copper and finished with the board's surface finish. This creates a conductive path along the board edges.
Benefits of edge plating: EMI/RFI shielding: Creates a continuous Faraday cage around the board, reducing electromagnetic emissions and improving immunity Enhanced grounding: Provides additional ground paths and low-impedance connections between layers Thermal dissipation: Helps conduct heat away from the board edges Mechanical protection: The plated edge protects the exposed substrate from moisture absorption and mechanical damage Improved solderability: Enables edge connections for board-to-board or board-to-chassis mounting Reduced parasitics: Minimizes edge effects in high-frequency designs
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
