BICHENGPCBBicheng Technologies Limited

ISOLA 370HR PCB - 6-Layer High-Performance FR-4 PCB with ENIG Finish

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

ISOLA 370HR laminates and prepregs, developed by Polyclad, utilize a patented high-performance epoxy resin system with a glass transition temperature (Tg) of 180°C. This multifunctional FR-4 resin is specifically engineered for multilayer Printed Circuit Board (PCB) applications that demand exceptional thermal performance and reliability. The laminates and prepregs are crafted with high-quality E-glass fabric, ensuring excellent resistance to Conductive Anodic Filament (CAF) formation. 370HR delivers outstanding thermal performance with a low Coefficient of Thermal Expansion (CTE), along with mechanical, chemical, and moisture resistance that meets or surpasses traditional FR-4 materials.

Utilized in countless PCB designs, 370HR is recognized as best in class for thermal reliability, CAF performance, processing ease, and effectiveness in sequential lamination processes.

2. Properties Glass Transition Temperature (Tg): 180°C (measured by DSC) Decomposition Temperature (Td): 340°C (5% weight loss measured by TGA) Time to Delaminate: T260 of 60 minutes, T288 of 30 minutes (measured by TMA with copper removed) Coefficient of Thermal Expansion (CTE): Pre-Tg Z-Axis of 45 ppm/°C, X/Y-Axis of 13/14 ppm/°C Thermal Conductivity: 0.4 W/mK Dielectric Constant (DK): 3.92 at 5 GHz and 10 GHz; 4.24 at 100 MHz; 4.17 at 1 GHz; 4.04 at 2 GHz Dissipation Factor (Df): 0.025 at 5 GHz and 10 GHz; 0.015 at 100 MHz; 0.0161 at 1 GHz; 0.021 at 2 GHz Dielectric Breakdown: Greater than 50 kV Comparative Tracking Index (CTI): 175V-249V Moisture Absorption: 0.15% Flammability Rating: UL94-V0 for laminate and laminated prepreg

High thermal reliability High-density interconnect capabilities

The stackup for the 370HR PCB includes various signal and power layers, with the total thickness reaching 62.0 mils. Specifics of each layer include top and bottom signal layers, ground planes, and power layers.

6. PCB Statistics -Components: 31 Total Pads: 46 Through-Hole Pads: 29 Top SMT Pads: 17 Bottom SMT Pads: 0 Vias: 24 Nets: 5

7. Type of Artwork SuppliedGerber RS-274-X format.

8. Accepted StandardIPC-Class-2 compliance.

10. Typical Applications Computing, Storage & Peripherals Consumer Electronics Networking & Communications Medical, Industrial, and Instrumentation Automotive and Transportation Aerospace and Defense

370HR 6-Layer Stackup
ISOLA 370HR PCB

PCB specifications

Glass Transition Temperature (Tg)180°C (measured by DSC)
Decomposition Temperature (Td)340°C (5% weight loss measured by TGA)
Time to DelaminateT260 of 60 minutes, T288 of 30 minutes (measured by TMA with copper removed)
Coefficient of Thermal Expansion (CTE)Pre-Tg Z-Axis of 45 ppm/°C, X/Y-Axis of 13/14 ppm/°C
Thermal Conductivity0.4 W/mK
Dielectric Constant (DK)3.92 at 5 GHz and 10 GHz; 4.24 at 100 MHz; 4.17 at 1 GHz; 4.04 at 2 GHz
Dissipation Factor (Df)0.025 at 5 GHz and 10 GHz; 0.015 at 100 MHz; 0.0161 at 1 GHz; 0.021 at 2 GHz
Dielectric BreakdownGreater than 50 kV
Comparative Tracking Index (CTI)175V-249V
Moisture Absorption0.15%
Flammability RatingUL94-V0 for laminate and laminated prepreg
Board Dimension40 mm x 55 mm (1 piece, +/- 0.15 mm)
Minimum Trace/Space4/4 mils
Minimum Hole Size0.2 mm
Blind ViaNone
Finished Board Thickness1.6 mm
Finished Copper Weight1 oz (1.4 mils) for both inner and outer layers
Via Plating Thickness20 µm
Surface FinishENIG
SilkscreenWhite on both top and bottom layers
Solder MaskGreen on both top and bottom layers
Impedance Control50 ohm on 10 mil traces
Electrical Testing100% testing performed prior to shipment
Total Pads46
Through-Hole Pads29
Top SMT Pads17
Bottom SMT Pads0
Vias24
Nets5

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com