IsoClad 933 PCB 2-Layer 31mil High-Frequency PTFE Laminates for Conformal Antennas and Radar Systems
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
Rogers IsoClad 933 laminates are non-woven fiberglass/PTFE composites designed for use as PCB substrates. The non-woven reinforcement makes these laminates suitable for applications where the final circuit requires conformability. IsoClad 933 laminates utilize longer random fibers and a proprietary manufacturing process to achieve excellent dimensional stability and enhanced mechanical strength.
Dielectric Constant (DK) of 2.33 at 10 GHz/23°C Dissipation Factor of 0.0016 at 10 GHz/23°C Strong Peel Strength of 10 lbs per inch Low water absorption at 0.05% Low outgassing with 0.03% TML, 0 CVCM, and 0.02% WVR Excellent Dk uniformity
Less rigid compared to woven fiberglass Highly isotropic in the X, Y, and Z axes Stable dielectric constant across a range of frequencies Enhanced dimensional stability
Copper Layer 1: 35 µmRogers IsoClad 933 Core: 0.787 mm (31 mil)Copper Layer 2: 35 µm
Components: 19Total Pads: 52Through Hole Pads: 25Top SMT Pads: 27Bottom SMT Pads: 0Vias: 17Nets: 2
Conformal AntennasStripline and Microstrip CircuitsGuidance SystemsRadar and Electronic Warfare Systems
PCB specifications
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
