F4BTMS450 4-Layer 1.4mm ENIG PCB for Aerospace and Radar Systems
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
The F4BTMS series is an upgraded version of the F4BTM series. It has achieved a technological breakthrough in material formulation and manufacturing processes. The material has been enriched with a significant amount of ceramics and reinforced with ultra-thin and ultra-fine glass fiber cloth, resulting in substantial improvements in material performance and a broader range of dielectric constants. It is a high-reliability material suitable for aerospace applications and can replace similar foreign products.
By incorporating a small amount of ultra-thin and ultra-fine glass fiber cloth and a large amount of uniformly distributed special nano-ceramics mixed with polytetrafluoroethylene resin, the negative effects of glass fiber on electromagnetic wave propagation are minimized. This reduces dielectric loss, enhances dimensional stability, and decreases the X/Y/Z anisotropy of the material. It also increases the usable frequency range, improves electrical strength, and enhances thermal conductivity. Additionally, the material exhibits excellent low thermal expansion coefficient and stable dielectric temperature characteristics.
The F4BTMS series comes with RTF low roughness copper foil as a standard feature, which reduces conductor loss and provides excellent peel strength. It can be used with either copper or aluminum bases.
Controlled Dielectric Constant: 4.5 ±0.09 at 10GHz Low Loss Performance: Dissipation factor of 0.0015 at 10GHz, 0.0019 at 20GHz Excellent Dimensional Stability: CTE x-axis 12 ppm/°C, y-axis 12 ppm/°C, z-axis 45 ppm/°C (-55°C to 288°C) Thermal Stability: Low thermal coefficient of Dk at -58 ppm/°C (-55°C to 150°C) Safety Certified: UL-94 V0 Effective Thermal Management: Thermal conductivity of 0.64 W/MK Environmental Resistance: Low Moisture absorption of 0.08%
Enhanced Signal Integrity: Reduced dielectric loss and conductor loss Improved Reliability: Excellent dimensional stability and thermal characteristics Wide Frequency Range: Increased usable frequency spectrum Superior Thermal Performance: Enhanced thermal conductivity and stable temperature characteristics Manufacturing Advantages: Excellent peel strength and processing compatibility
5. PCB Stackup (4-Layer Rigid Structure)
Components: 3 Total Pads: 14 Thru Hole Pads: 6 Top SMT Pads: 8 Bottom SMT Pads: 0 Vias: 4 Nets: 10
Aerospace equipment, space and cabin equipment Microwave, RF circuits Radar, military radar systems Feed networks Phase-sensitive antennas, phased array antennas Satellite communications, and more
Artwork Format: Gerber RS-274-X Accepted Standard: IPC-Class-2 Availability: Worldwide
PCB specifications
Layer stack-up
- Copper Layer 1 · Copper · 35 μmcopper
- Dielectric 1 · F4BTMS450 Core · 0.127 mm (5mil)core
- Copper Layer 2 · Copper · 35 μmcopper
- Dielectric 2 · Prepreg RO4450F · 0.102 mm (4mil)core
- Dielectric 3 · F4BTMS450 Core · 0.127 mm (5mil)core
- Copper Layer 3 · Copper · 35 μmcopper
- Dielectric 4 · Prepreg RO4450F · 0.102 mm (4mil)core
- Dielectric 5 · F4BTMS450 Core · 0.762 mm (30mil)core
- Copper Layer 4 · Copper · 35 μmcopper
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
