BICHENGPCBBicheng Technologies Limited

F4BTMS255 2-Layer 1.6mm PCB – 60mil Ceramic-Filled PTFE with Immersion Gold for Aerospace & RF

Custom product. Images and specifications are for reference only; the confirmed drawing governs.

Brief introduction

1. Introduction to F4BTMS255 2-Layer 1.6mm PCB

The F4BTMS series represents an upgraded version of the F4BTM series, achieving significant technological breakthroughs in material formulation and manufacturing processes. Enriched with substantial ceramic content and reinforced with ultra-thin, ultra-fine glass fiber cloth, this material demonstrates substantial performance improvements and offers a broader range of dielectric constants. As a high-reliability material suitable for aerospace applications, it can effectively replace similar imported products.

By incorporating minimal ultra-thin glass fiber cloth and large amounts of uniformly distributed special nano-ceramics mixed with polytetrafluoroethylene resin, the material minimizes the negative effects of glass fiber on electromagnetic wave propagation. This innovative composition reduces dielectric loss, enhances dimensional stability, decreases X/Y/Z anisotropy, expands usable frequency range, improves electrical strength, and enhances thermal conductivity. Additionally, the material exhibits excellent low thermal expansion coefficient and stable dielectric temperature characteristics.

The F4BTMS series features RTF low roughness copper foil as standard, which reduces conductor loss while maintaining excellent peel strength, and is compatible with both copper and aluminum bases.

Dielectric constant (Dk) of 2.55 ±0.04 at 10GHz Dissipation factor of 0.0012 at 10GHz, 0.0013 at 20GHz CTE: x-axis 15 ppm/°C, y-axis 20 ppm/°C, z-axis 80 ppm/°C (-55°C to 288°C) Low thermal coefficient of Dk: -92 ppm/°C (-55°C to 150°C) UL-94 V0 flammability rating Low moisture absorption: 0.025% RTF low roughness copper foil standard

Minimal electromagnetic wave propagation interference Reduced dielectric loss and enhanced dimensional stability Excellent thermal and electrical performance Suitable for high-reliability aerospace applications Compatible with domestic manufacturing processes

5. PCB Stackup (2-Layer Rigid Structure)

Copper_layer_1 - 35 μm F4BTMS255 Core - 1.524 mm (60mil) Copper_layer_2 - 35 μm

Components: 28Total Pads: 65Thru Hole Pads: 44Top SMT Pads: 21Bottom SMT Pads: 0Vias: 41Nets: 2

Aerospace equipment and space cabin systemsMicrowave and RF circuitsRadar and military radar systemsFeed networksPhase-sensitive antennas and phased array antennasSatellite communications

Artwork Format: Gerber RS-274-XAccepted Standard: IPC-Class-2Availability: Worldwide

F4BTMS255 PCB

PCB specifications

Base MaterialF4BTMS255
Layer CountDouble Sided
Board Dimensions87mm × 80mm (±0.15mm)
Min. Trace/Space5 mil / 7 mil
Min. Hole Size0.3 mm
Blind ViasNo
Finished Board Thickness1.6 mm
Finished Cu Weight1 oz
Via Plating Thickness20 μm
Surface FinishImmersion Gold
Top SilkscreenWhite
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

Tell us the board. We answer within 4 hours.

Large Gerber files are easier by email — this form gets the conversation started with the right engineer.

Send request

Or email your files torfq@bichengcircuits.com