18-Layer M6 High-Speed PCB with ENIG Surface Finish
Custom product. Images and specifications are for reference only; the confirmed drawing governs.
Brief introduction
S1000-2M is a high-performance copper-clad laminate (CCL) from Shengyi Technology, specifically designed for high-layer-count and high-reliability PCB applications.
1.Ultra-Low Dielectric Constant and Loss Tangent: At 10GHz, typical Dk is approximately 3.4-3.6, with Df as low as below 0.002, significantly reducing signal attenuation and distortion. 2.Excellent Signal Integrity: Minimal signal loss ensures integrity over long-distance, high-speed transmissions, supporting extended trace lengths or higher data rates. 3.High Thermal Reliability: Glass transition temperature (Tg) exceeds 185°C with high decomposition temperature (Td), capable of withstanding lead-free soldering processes and ensuring dimensional stability and long-term reliability in demanding environments. 4.Stable Electrical Performance: Dielectric properties remain highly stable across wide frequency and temperature ranges, facilitating precise impedance control. 5.Suitable for High-Layer-Count, Complex Structures: Compatible with prepregs like R-5670G, ideal for manufacturing complex multilayer boards with 18 or more layers, meeting the needs of high-end servers, switches, and optical modules.
A High-Speed PCB is specifically designed and manufactured for transmitting high-speed digital signals. The "high-speed" characteristic refers not only to high clock frequencies but, more critically, to extremely short signal rise/fall times (typically less than 1 nanosecond), which cause signals to exhibit significant transmission line effects.
Core Challenges and Requirements in High-Speed PCB Design:
1.Impedance Control: Precise control of characteristic impedance (e.g., 50Ω single-ended, 100Ω differential) is essential to minimize signal reflections. 2.Signal Integrity Management: Addressing signal distortion caused by loss, reflection, crosstalk, and ground bounce. 3.Power Integrity Assurance: Providing stable, clean power to high-speed chips and reducing simultaneous switching noise. 4.Strict Stack-up Design: Precise layer planning to provide clear reference planes for high-speed signals, controlling impedance and minimizing crosstalk. 5.Selection of Low-Loss Materials: Such as Megtron6, to reduce dielectric loss effects on high-frequency signals. 6.Implementation of Advanced Processes: Including resin-filled vias and back-drilling to improve via performance and reduce signal attenuation and reflection.
3.PCB Stackup (18-Layer Rigid Structure)
This PCB features a symmetrical 18-layer structure designed to provide optimal transmission environment and impedance control for high-speed signals. Total pressed thickness is 1.976mm.
Data Centers & Cloud Computing: High-end server/workstation motherboards for CPU, memory, and high-speed bus interconnects. Network switches/routers, including 100G/400G/800G Ethernet switch chip interconnect boards and optical module driver boards. AI accelerator cards/GPU boards meeting extremely high-bandwidth memory interface and chip-to-chip interconnect requirements.
Communication Infrastructure: 5G/6G base station units (AAU, DU) for high-speed digital processing boards and RF front-end interface boards. Optical transmission equipment, including coherent optical modules and high-speed signal processing boards in OTN devices.
High-Performance Computing & Storage: Supercomputer interconnect backplanes. All-flash array controller boards, NVMe over Fabric accelerator cards.
Advanced Test & Measurement Instruments: Internal signal acquisition and processing boards for high-speed digital oscilloscopes, bit error rate testers, and network analyzers.
Automotive Electronics (Advanced): Autonomous driving domain controllers, high-resolution vehicle camera processing boards, in-vehicle high-speed Ethernet switches.
Aerospace & Defense: Radar signal processors, electronic warfare systems, and high-speed data processing units in satellite communication payloads.
Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class-2 Availability: Worldwide
This 18-layer M6 high-speed PCB, through the use of top-tier Megtron6 low-loss material, a precise 18-layer stack-up design, ENIG surface finish, and advanced processes like through-hole resin filling, achieves exceptional levels of signal integrity, power integrity, and mechanical reliability. Its design thoroughly considers impedance control, loss minimization, and crosstalk suppression, making it a critical hardware foundation for next-generation data centers, high-speed communication networks, and high-performance computing systems. Rigorous quality control measures, including impedance and low-resistance testing, further ensure stable performance under extreme conditions, meeting the growing challenges of data rates and system complexity in the coming years.
PCB specifications
Layer stack-up
- L1 (Top) · Copper · 0.035mmcopper
- D1 · R-5670(G) Prepreg · 0.076mmcore
- L2 · Copper · 0.018mmcopper
- C1 · Core R-5775(G) · 0.1mmcore
- L3 · Copper · 0.018mmcopper
- D2 · R-5670(G) Prepreg · 0.076mmcore
- L4 · Copper · 0.018mmcopper
- C2 · Core R-5775(G) · 0.1mmcore
- L5 · Copper · 0.018mmcopper
- D3 · R-5670(G) Prepreg · 0.076mmcore
- L6 · Copper · 0.035mmcopper
- C3 · Core R-5775(G) · 0.2mmcore
- L7 · Copper · 0.035mmcopper
- D4 · R-5670(G) Prepreg · 0.076mmcore
- L8 · Copper · 0.035mmcopper
- C4 · Core R-5775(G) · 0.1mmcore
- L9 · Copper · 0.018mmcopper
- D5 · R-5670(G) Prepreg · 0.076mmcore
- L10 · Copper · 0.018mmcopper
- C5 · Core R-5775(G) · 0.1mmcore
- L11 · Copper · 0.018mmcopper
- D6 · R-5670(G) Prepreg · 0.076mmcore
- L12 · Copper · 0.018mmcopper
- C6 · Core R-5775(G) · 0.076mmcore
- L13 · Copper · 0.018mmcopper
- D7 · R-5670(G) Prepreg · 0.036mmcore
- L14 · Copper · 0.018mmcopper
- C7 · Core R-5775(G) · 0.076mmcore
- L15 · Copper · 0.018mmcopper
- D8 · R-5670(G) Prepreg · 0.076mmcore
- L16 · Copper · 0.018mmcopper
- C8 · Core R-5775(G) · 0.1mmcore
- L17 · Copper · 0.018mmcopper
- L18 (Bottom) · Copper · 0.035mmcopper
- Total · Pressed Thickness · 1.976mmcore
Tell us the board. We answer within 4 hours.
Large Gerber files are easier by email — this form gets the conversation started with the right engineer.
Send requestOr email your files torfq@bichengcircuits.com
