Laminate data sheet
Wangling WL-CT338
27 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Properties
| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical) | 3.38 | — | — | 10 GHz | GB/T 12636-1990 |
| Dielectric Constant (Design) | 3.55 | — | — | 10 GHz | 50Ω Microstrip Line |
| DK Tolerance | ±0.05 | — | — | — | — |
| Dissipation Factor | 0.0023 | — | — | 2 GHz | GB/T 12636-1990 |
| Dissipation Factor | 0.0029 | — | — | 10 GHz | GB/T 12636-1990 |
| Dissipation Factor | 0.0038 | — | — | 20 GHz | GB/T 12636-1990 |
| TCDK | 45 | ppm/°C | — | -55°C ~ 150°C | — |
| Volume Resistivity | 6×10⁹ | MΩ·cm | — | Normal State | IPC-TM-650 |
| Surface Resistivity | 7×10⁸ | MΩ | — | Normal State | IPC-TM-650 |
| Electrical Strength (Z) | 31 | KV/mm | — | 5KW, 500V/s | IPC-TM-650 2.5.6.2 |
| Breakdown Voltage (XY) | 30 | KV | — | 5KW, 500V/s | IPC-TM-650 |
| CTE (X-axis) | 14 | ppm/°C | — | -55°C ~ 288°C | IPC-TM-650 2.4.41 |
| CTE (Y-axis) | 16 | ppm/°C | — | -55°C ~ 288°C | IPC-TM-650 2.4.41 |
| CTE (Z-axis) | 50 | ppm/°C | — | -55°C ~ 288°C | IPC-TM-650 2.4.41 |
| Thermal Stress | No Delamination | — | — | 288°C, 10s, 3x | IPC-TM-650 |
| Long-Term Operating Temp | -55 ~ +260 | °C | — | — | — |
| Thermal Conductivity | 0.70 | W/(M·K) | — | Z direction | — |
| Peel Strength (1oz ED) | 1.0 | N/mm | — | ED Copper | IPC-TM-650 2.4.8 |
| Peel Strength (1oz RTF) | 0.72 | N/mm | — | RTF Copper | IPC-TM-650 2.4.8 |
| Water Absorption | 0.04 | % | — | 23.5±2°C, 24h | ASTM D570 |
| Density | 1.78 | g/cm³ | — | Room Temp | — |
| Flammability | Non-flame retardant | — | — | UL-94 | UL 94 |
| PIM (with RTF) | ≤ -158 | dBc | — | — | — |
| Halogen | Halogen-free | — | — | — | — |
| TG | >280 | °C | — | — | — |
| TD (Initial) | 421 | °C | — | — | — |
| Composition | Hydrocarbon + Ceramic + Fiberglass Cloth | — | — | — | — |
Boards built on this laminate
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote
