Laminate data sheet
TMM4
14 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Properties
| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant, ε Process | 4.5 ± 0.045 | -- | Z | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant, ε Design | 4.7 | - | - | 8GHz to 40 GHz | Differential Phase Length Method |
| Dissipation Factor (process) | 0.002 | - | Z | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of ε | +15 | ppm/K | - | -55°C-125°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 6 x 10⁸ | Mohm.cm | - | - | ASTM D257 |
| Surface Resistivity | 1 x 10⁹ | Mohm | - | - | ASTM D257 |
| CTE - X | 16 | ppm/K | X | 0 to 140°C | ASTM E 831 |
| CTE - Y | 16 | ppm/K | Y | 0 to 140°C | ASTM E 831 |
| CTE - Z | 21 | ppm/K | Z | 0 to 140°C | ASTM E 831 |
| Thermal Conductivity | 0.7 | W/m/K | Z | 80°C | ASTM C518 |
| Moisture Absorption | 0.07-0.18 | % | - | D/24/23 | ASTM D570 |
| Specific Gravity | 2.07 | - | - | A | ASTM D792 |
| Specific Heat Capacity | 0.83 | J/g/K | - | A | Calculated |
| Flammability | V-0 | - | - | - | UL 94 |
Boards built on this laminate
Rogers TMM4 Microwave Printed Circuit Board 15mil 20mil 25mil 30mil 50mil 60mil With Immersion Gold
Rogers TMM4 Microwave Printed Circuit Board 15mil 20mil 25mil 30mil 50mil 60mil With Immersion Gold
Rogers TMM4 Microwave Printed Circuit Board 15mil 20mil 25mil 30mil 50mil 60mil With Immersion Gold
TMM4 High Frequency Printed Circuit Board 60mil 1.524mm Rogers RF PCB DK4.5 with Immersion Gold
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote