Laminate data sheet
RT/Duroid 5880
18 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Also known as: RT5880
Properties
| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant, εr Process | 2.20 ±0.02 | - | — | 10 GHz/23°C | IPC-TM-650 2.5.5.5 |
| Dielectric Constant, εr Design | 2.20 | - | — | 8GHz to 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tanδ | 0.0009 | - | — | 10 GHz/23°C | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | -125 | ppm/°C | — | -50°C to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 x 10⁷ | Mohm·cm | — | C/96/35/90 | ASTM D257 |
| Surface Resistivity | 3 x 10⁷ | Mohm | — | C/96/35/90 | ASTM D257 |
| Td | 500 | °C TGA | — | - | ASTM D3850 |
| Thermal Conductivity | 0.2 | W/m/k | — | 80°C | ASTM C518 |
| CTE - x | 31 | ppm/°C | — | 0-100°C | IPC-TM-650 2.4.41 |
| CTE - y | 48 | ppm/°C | — | 0-100°C | IPC-TM-650 2.4.41 |
| CTE - z | 237 | ppm/°C | — | 0-100°C | IPC-TM-650 2.4.41 |
| Tensile Modulus (X) | 1070 (156) | MPa (kpsi) | — | 23°C | ASTM D638 |
| Tensile Modulus (Y) | 860 (125) | MPa (kpsi) | — | 23°C | ASTM D638 |
| Copper Peel Strength | 31.2 (5.5) | pli (N/mm) | — | after solder float | IPC-TM-650 2.4.8 |
| Moisture Absorption | 0.02 | % | — | D48/50 | ASTM D570 |
| Density | 2.2 | gm/cm³ | — | - | ASTM D792 |
| Flammability | V-0 | - | — | - | UL 94 |
| Lead-free Process Compatible | Yes | - | — | - | - |
Boards built on this laminate
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote
