Laminate data sheet
Rogers CuClad 217
24 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Properties
| Property | Test Method | Condition | CuClad 217 |
|---|---|---|---|
| Dielectric Constant @10 GHz | IPC TM-650 2.5.5.5 | C23/50 | 2.17, 2.20 |
| Dielectric Constant @1 MHz | IPC TM-650 2.5.5.3 | C23/50 | 2.17, 2.20 |
| Dissipation Factor @10 GHz | IPC TM-650 2.5.5.5 | C23/50 | 0.0009 |
| Thermal Coefficient of Er | IPC TM-650 2.5.5.5 Adapted | –10°C to +140°C | –160 ppm/°C |
| Peel Strength (lbs/in) | IPC TM-650 2.4.8 | After Thermal Stress | 14 |
| Volume Resistivity (MΩ·cm) | IPC TM-650 2.5.17.1 | C96/35/90 | 2.3×10⁸ |
| Surface Resistivity (MΩ) | IPC TM-650 2.5.17.1 | C96/35/90 | 3.4×10⁶ |
| Arc Resistance (seconds) | ASTM D-495 | D48/50 | >180 |
| Tensile Modulus (kpsi) | ASTM D-638 | A, 23°C | 275, 219 |
| Tensile Strength (kpsi) | ASTM D-882 | A, 23°C | 8.8, 6.6 |
| Compressive Modulus (kpsi) | ASTM D-695 | A, 23°C | 237 |
| Flexural Modulus (kpsi) | ASTM D-790 | A, 23°C | 357 |
| Dielectric Breakdown (kV) | ASTM D-149 | D48/50 | >45 |
| Specific Gravity (g/cm³) | ASTM D-792 Method A | A, 23°C | 2.23 |
| Water Absorption (%) | MIL-S-13949H 3.7.7 / IPC TM-650 2.6.2.2 | E1/105 + D24/23 | 0.02 |
| CTE (ppm/°C) – X Axis | IPC TM-650 2.4.24 (Mettler 3000 TMA) | 0°C to 100°C | 29 |
| CTE (ppm/°C) – Y Axis | IPC TM-650 2.4.24 (Mettler 3000 TMA) | 0°C to 100°C | 28 |
| CTE (ppm/°C) – Z Axis | IPC TM-650 2.4.24 (Mettler 3000 TMA) | 0°C to 100°C | 246 |
| Thermal Conductivity (W/m·K) | ASTM E-1225 | 100°C | 0.26 |
| Outgassing – TML (%) | NASA SP-R-0022A | 125°C, ≤10⁻⁶ torr | 0.01 |
| Outgassing – CVCM (%) | NASA SP-R-0022A | 125°C, ≤10⁻⁶ torr | 0.01 |
| Outgassing – WVR (%) | NASA SP-R-0022A | 125°C, ≤10⁻⁶ torr | 0.00 |
| Visible Condensate | NASA SP-R-0022A | 125°C, ≤10⁻⁶ torr | NO |
| Flammability | UL 94 Vertical Burn / IPC TM-650 2.3.10 | C48/23/50, E24/125 | Meets UL94-V0 |
Boards built on this laminate
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote
