BICHENGPCBBicheng Technologies Limited

Laminate data sheet

Rogers CLTE-MW

26 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.

Properties

Rogers CLTE-MW
PropertyTypical Value¹UnitsTest ConditionsTest Method
Electrical Properties
Dielectric Constant (process)2.94 to 3.02 ± 0.04-23°C @ 50% RH, 10 GHzIPC TM-650 2.5.5.5
Dielectric Constant (design)3.03 to 3.10-C-24/23/50, 8-40 GHzMicrostrip Differential Phase Length
Dissipation Factor0.0015-23°C @ 50% RH, 10 GHzIPC TM-650 2.5.5.5
Thermal Coefficient of Dk-35ppm/°C0 to 100°C, 10 GHzIPC TM-650 2.5.5.5
Volume Resistivity1.3 x 10⁷MΩ·cmC96/35/90IPC TM-650 2.5.17.1
Surface Resistivity2.5 x 10⁶MΩC96/35/90IPC TM-650 2.5.17.1
Electrical Strength630V/mil-IPC TM-650 2.5.6.2
Dielectric Breakdown44kVD-48/50IPC TM-650 2.5.6
Comparative Tracking Index600V / PLC 0class/voltsC-40/23/50UL-746A, ASTM D6054
Thermal Properties
Decomposition Temperature (Td)500°C2hrs @ 105°C, 5% Weight LossIPC TM-650 2.3.40
Coefficient of Thermal Expansion - x8ppm/°C-55°C to 288°CIPC TM-650 2.4.41
Coefficient of Thermal Expansion - y8ppm/°C-55°C to 288°CIPC TM-650 2.4.41
Coefficient of Thermal Expansion - z30ppm/°C-55°C to 288°CIPC TM-650 2.4.24
Thermal Conductivity0.42W/(m·K)Z DirectionASTM D5470
Time to Delamination>60minutesas-received, 288°CIPC TM-650 2.4.24.1
Mechanical Properties
Copper Peel Strength1.1 (6.0)N/mm (lbs/in)10s @ 288°C, 35 μm foilIPC TM-650 2.4.8
Flexural Strength (MD, CMD)113, 99 (16.4, 14.4)MPa (ksi)25°C ± 3°CASTM D790
Tensile Strength (MD, CMD)83, 80 (12.0, 11.6)MPa (ksi)23°C @ 50% RHASTM D3039/D3039-14
Flex Modulus (MD, CMD)6468, 6360 (938.1, 922.4)MPa (ksi)25°C ± 3°CIPC TM-650 2.4.4
Dimensional Stability (MD, CMD)0.22, 0.22mil/inchafter etch + bakeIPC-TM-650 2.4.39a
Physical Properties
FlammabilityV-0--UL 94
Moisture Absorption0.03%E1/105 + D48/50IPC TM-650 2.6.2.1
Density2.1g/cm³C24/23/50ASTM D792
Specific Heat Capacity0.93J/g·°K2 hours at 105°CASTM E2716
NASA Outgassing
Total Mass Lost0.03%TML/CVCMASTM E595
Collected Volatiles<0.01%—ASTM E595

Need a quote for this laminate?

Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.

Get a quote