Laminate data sheet
RO3006
17 parameters from the manufacturer data sheet. Values are for reference; the confirmed specification governs.
Properties
| Property | Value | Unit | Direction | Condition | Test method |
|---|---|---|---|---|---|
| Dielectric Constant, ε Process | 6.15±0.05 | — | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 Clamped Stripline |
| Dielectric Constant, ε Design | 6.5 | — | Z | 8GHz to 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tanδ | 0.002 | — | Z | 10 GHz/23℃ | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of ε | -262 | ppm/℃ | Z | 10 GHz -50℃to 150℃ | IPC-TM-650 2.5.5.5 |
| Dimensional Stability | 0.270.15 | mm/m | XY | COND A | IPC-TM-650 2.2.4 |
| Volume Resistivity | 105 | MΩ.cm | — | COND A | IPC 2.5.17.1 |
| Surface Resistivity | 105 | MΩ | — | COND A | IPC 2.5.17.1 |
| Tensile Modulus | 14981293 | MPa | XY | 23℃ | ASTM D 638 |
| Moisture Absorption | 0.02 | % | — | D48/50 | IPC-TM-650 2.6.2.1 |
| Specific Heat | 0.86 | j/g/k | — | — | Calculated |
| Thermal Conductivity | 0.79 | W/M/K | — | 50℃ | ASTM D 5470 |
| Coefficient of Thermal Expansion (-55 to 288℃) | 171724 | ppm/℃ | XYZ | 23℃/50% RH | IPC-TM-650 2.4.4.1 |
| Td | 500 | ℃ TGA | — | — | ASTM D 3850 |
| Density | 2.6 | gm/cm3 | — | 23℃ | ASTM D 792 |
| Copper Peel Strength | 7.1 | lb/in. | — | 1oz, EDC After Solder Float | IPC-TM 2.4.8 |
| Flammability | V-0 | — | — | — | UL 94 |
| Lead-free Process Compatible | Yes | — | — | — | — |
Boards built on this laminate
Rogers RO3006 High Frequency Printed Circuit Board 2-Layer Rogers 3006 10mil PCB DK6.15 DF 0.002 Microwave Gold PCB
Rogers RO3006 RF Printed Circuit Board 2-Layer Rogers 3006 50mil 1.27mm Microwave PCB with Immersion Gold
Rogers RO3006 Microwave PCB 2-Layer Rogers 3006 25mil 0.635mm Circuit Board DK6.15 DF 0.002 High Frequency PCB
Need a quote for this laminate?
Send us your Gerber, layer count and quantity — you get a DFM note and an indicative price within 4 working hours.
Get a quote