面向严苛应用的 TSM-DS3 高频电路板
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
- 材料
- Taconic TSM-DS3 (Ceramic-filled Woven Fiberglass PTFE) / 5-90mil
- 起订量
- 1PCS
- 交期
- 7-13 working days
- 包装
- Vacuum / Anti-static Packaging
- 付款方式
- T/T, Paypal
产品简介
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
TSM-DS3 is a thermally stable material known for its industry-leading low loss characteristics, boasting a dissipation factor (DF) of 0.0011 at 10 GHz. It offers predictability and consistency comparable to the best fiberglass reinforced epoxies on the market.
This ceramic-filled reinforced material contains approximately 5% fiberglass, allowing it to compete with epoxies in the fabrication of large-format complex multilayers, making it an excellent choice for demanding applications.
One of TSM-DS3's key advantages is its suitability for high-power applications. With a thermal conductivity (TC) of 0.65 W/m*K, it efficiently conducts heat away from heat sources in printed wiring board (PWB) designs, ensuring effective heat dissipation and optimal performance in high-power scenarios.
Additionally, TSM-DS3 exhibits very low coefficients of thermal expansion, making it well-suited for applications subject to significant thermal cycling. This feature enhances reliability and stability in environments with varying temperatures.
1. Industry-leading dissipation factor (DF) of 0.0011 at 10 GHz. 2. High thermal conductivity for effective heat dissipation. 3. Low fiberglass content of approximately 5%. 4. Dimensional stability comparable to epoxy materials. 5. Enables fabrication of large-format, high-layer-count PWBs with complex designs. 6. Supports the construction of complex PCBs with high yield and consistent performance. 7. Maintains stable dielectric constant (DK) within +/- 0.25 across a wide temperature range (-30 °C to 120 °C). 8. Compatible with resistor foils, broadening application possibilities.
1. Couplers2. Phased array antennas3. Radar manifolds4. mmWave antennas5. Oil drilling6. Semiconductor / Automatic Test Equipment (ATE) testing
规格参数
典型性能参数:TSM-DS3
本表为材料本身的介电与机械特性,与上面的板级规格参数不同。
打开独立数据表(可打印)| 属性 | 数值 | 单位 | 方向 | 条件 | 测试标准 |
|---|---|---|---|---|---|
| Dk | 3.00 | - | — | — | IPC-650 2.5.5.3 |
| TcK (-30 to 120 °C) | 5.4 | ppm | — | — | IPC-650 2.5.5.5.1 (Modified) |
| Df | 0.0011 | - | — | — | IPC-650 2.5.5.5.1 (Modified) |
| Dielectric Breakdown | 47.5 | kV | — | — | IPC-650 2.5.6 (ASTM D 149) |
| Dielectric Strength | 548 | V/mil | — | — | ASTM D 149 (Through Plane) |
| Arc Resistance | 226 | Seconds | — | — | IPC-650 2.5.1 |
| Moisture Absorption | 0.07 | % | — | — | IPC-650 2.6.2.1 |
| Thermal Conductivity (unclad) | 0.65 | W/M·K | — | — | ASTM F433/ASTM 1530-06 |
| CTE (x axis) (RT to 125°C) | 10 | ppm/°C | — | — | IPC-650 2.4.41/TMA |
| CTE (y axis) (RT to 125°C) | 16 | ppm/°C | — | — | IPC-650 2.4.41/TMA |
| CTE (z axis) (RT to 125°C) | 23 | ppm/°C | — | — | IPC-650 2.4.41/TMA |
| Flexural Strength (MD) | 11,811 (81) | psi (N/mm²) | — | — | ASTM D 790/IPC-650 2.4.4 |
| Flexural Strength (CD) | 7,512 (51) | psi (N/mm²) | — | — | ASTM D 790/IPC-650 2.4.4 |
| Tensile Strength (MD) | 7,030 (48) | psi (N/mm²) | — | — | ASTM D 3039/IPC-650 2.4.19 |
| Tensile Strength (CD) | 3,830 (26) | psi (N/mm²) | — | — | ASTM D 3039/IPC-650 2.4.19 |
| Peel Strength (CV1) | 8 (1.46) | lbs/in (N/mm) | — | — | IPC-650 2.4.8 Sec 5.2.2 (TS) |
| Dimensional Stability (MD/CD) | 0.21 / 0.20 | mils/in. | — | — | IPC-650 2.4.39 |
| Density | 2.11 | g/cm³ | — | — | ASTM D 792 |
| Flammability | V-0 | - | — | — | UL 94 |
| Td (2% Weight Loss) | 526 | °C | — | — | IPC-650 2.4.24.6 (TGA) |
| Td (5% Weight Loss) | 551 | °C | — | — | IPC-650 2.4.24.6 (TGA) |
