TP440 0.5mm 高 DK 射频电路板 DK4.4,适用于北斗、弹载与小型化天线
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
产品简介
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
TP440 is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.
This 2-layer rigid PCB is constructed entirely with TP440 as the core material at 0.5mm thickness, with immersion gold surface finish and 1oz copper on both sides. Its DK of 4.4 offers excellent high-frequency performance, making it ideal for demanding applications such as Beidou navigation systems, missile-borne electronics, fuzes, GPS antennas, and miniaturized antennas.
TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.
TP440 features a dielectric constant of 4.4±0.09 at 10GHz, ultra-low dissipation factor of 0.0010, and excellent thermal stability. The material operates reliably across a wide temperature range from -100°C to +150°C and is easy to machine, supporting standard PCB fabrication processes including drilling, cutting, and engraving. The copper foil adhesion is more reliable than ceramic substrates with vacuum coating.
技术特性与优势
- Dielectric Constant (DK): 4.4 ± 0.09 at 10GHz
- Dissipation Factor (Df): 0.0010 at 10GHz
- Thermal Coefficient of DK (TCDK): -50 ppm/°C
- Coefficient of Thermal Expansion (CTE): X=60 ppm/°C, Y=60 ppm/°C, Z=70 ppm/°C
- Operating Temperature Range: -100°C to +150°C
- Thermal Conductivity: 0.44 W/(M·K)
- Density: 1.89 g/cm³
- Long-term use temperature: -100°C to +150°C
- Excellent low-temperature resistance
- Radiation resistance and low outgassing
- Water absorption: ≤0.01%
- Easy machinability (drilling, cutting, engraving)
- Superior adhesion between copper foil and dielectric
- Stable DK (4.4±0.09) — Consistent impedance control for high-frequency designs
- Ultra-Low Df (0.0010) — Excellent high-frequency performance with minimal signal loss
- No Glass Fiber Reinforcement — Uniform dielectric properties and consistent performance
- Wide Operating Temperature (-100°C to +150°C) — Reliable performance in extreme environments
- Excellent Radiation Resistance — Ideal for aerospace and defense applications
- Superior Adhesion — Copper foil adhesion more reliable than ceramic substrates
- Easy Machinability — Supports drilling, cutting, shearing, and engraving with high yield
- Cost-Effective — Lower processing cost compared to ceramic substrates
- Immersion Gold Finish — Excellent solderability and corrosion resistance
- Feature — Benefit
- DK 4.4 ± 0.09 @ 10GHz — Stable dielectric constant for consistent impedance control
- Df 0.0010 @ 10GHz — Ultra-low loss for high-frequency RF and microwave designs
- TCDK: -50 ppm/°C — Stable electrical performance over temperature
- CTE: 60/60/70 ppm/K — Good dimensional stability
- Thermal conductivity 0.44 W/m/K — Efficient heat removal
- Thermoplastic resin — Easy machinability, cost-effective processing
- Radiation resistance — Ideal for aerospace, missile-borne, and defense applications
产品图片
规格参数
| Item | Specification |
| Base material | Wangling TP440 (Polyphenylene oxide + Ceramic) |
| Layer count | 2-layer |
| Board dimensions | 67.5mm x 58.6mm = 1 PCS, ±0.15mm |
| Minimum Trace/Space | 6/8 mils |
| Minimum Hole Size | 0.3mm |
| Blind vias | No |
| Finished board thickness | 0.6mm (0.5mm core + copper) |
| Finished Cu weight | 1 oz (35 μm / 1.4 mils) all layers |
| Via plating thickness | 20 μm |
| Surface finish | Immersion Gold |
| Top Silkscreen | No |
| Bottom Silkscreen | No |
| Top Solder Mask | No |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
| Parameter | Options |
| Standard Thicknesses | 0.5mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, 3.0mm, 4.0mm, 5.0mm, 6.0mm, 7.0mm, 8.0mm, 10.0mm, 12.0mm (± tolerance per thickness) |
| Standard Panel Sizes | 150x150mm, 160x160mm, 200x200mm, 170x240mm (tolerance -2mm) |
| Standard Claddings | ED Copper: 0.018mm (½ oz), 0.035mm (1 oz); additional claddings available |
| DK Options | 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11.0, 16.0, 20.0, 22.0, 25.0 (customizable 3.0-25) |
叠层结构
- Layer:Copper_layer_1 (Top);Material:Copper;Thickness:35 μm (1 oz)
- Layer:Dielectric;Material:TP440 Core;Thickness:0.5 mm
- Layer:Copper_layer_2 (Bottom);Material:Copper;Thickness:35 μm (1 oz)
PCB 统计
- Parameter — Value
- Components — 11
- Total Pads — 19
- Thru Hole Pads — 10
- Top SMT Pads — 9
- Bottom SMT Pads — 0
- Vias — 7
- Nets — 1
应用领域
- GPS antennas
- Missile-borne systems and guidance electronics
- Fuzes and proximity sensors
- Miniaturized antennas (phased array, patch antennas)
- Beidou navigation systems
- High-frequency RF and microwave circuits
- Satellite communication equipment
材料参数
TP440 Typical Properties
| Property | TP440 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Composition | PPE / Ceramic (Molded) | — | — | — | Wangling official |
| Dielectric Constant (Process) | 4.40 ± 0.09 | Z | — | 5 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | — | Z | — | — | Wangling design value |
| Dissipation Factor | 0.0010 | Z | — | 5 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -46 | — | ppm/°C | — | Wangling official |
| CTE (Z) | 70 | Z | ppm/°C | — | Wangling official |
| Copper Peel Strength | — | — | lbs/in | — | — |
| Flammability | V-0 | — | — | — | UL 94 |
质量保证
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
Important Process Considerations
This material is not suitable for 260°C thermal shock testing
Cannot be wave soldered
Hand soldering with a constant temperature soldering iron is recommended
Reflow soldering is generally not advised; if necessary, maximum temperature should not exceed 200°C
Multilayer processing requires careful consideration with low-temperature bonding sheets
