TP2200 0.8mm 沉金高 DK 射频电路板,适用于北斗、弹载与小型化天线
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
产品简介
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
TP2200 is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.
This 2-layer rigid PCB is constructed entirely with TP2200 as the core material at 0.8mm thickness, with immersion gold surface finish, no silkscreen, no solder mask, and 1oz copper on both sides. Its DK of 22±0.88 offers excellent high-frequency performance, making it ideal for demanding applications such as Beidou navigation systems, missile-borne equipment, fuzes, and miniaturized antennas.
TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.
The dielectric constant can be arbitrarily selected within the range of 3 to 25 according to circuit requirements, and it is stable. Common dielectric constants include 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11, 16, and 20. The dielectric loss is low, and the loss increases as the frequency increases, but the change is not significant within 10 GHz.
TP2200 features a dielectric constant of 22±0.88 at 5GHz, low dissipation factor of 0.002~0.0025, and excellent thermal stability. The material operates reliably across a wide temperature range from -100°C to +150°C and is easy to machine, supporting standard PCB fabrication processes including drilling, turning, grinding, shearing, and etching — capabilities that ceramic substrates cannot achieve. The copper foil adhesion is more reliable than ceramic substrates with vacuum coating.
技术特性与优势
- Dielectric Constant (DK): 22 ± 0.88 at 5GHz
- Dissipation Factor (Df): 0.002 ~ 0.0025 at 5GHz
- Thermal Coefficient of DK (TCDK): -55 ppm/°C
- Coefficient of Thermal Expansion (CTE): X=35 ppm/°C, Y=35 ppm/°C, Z=40 ppm/°C
- Long-term Operating Temperature: -100°C to +150°C
- Thermal Conductivity: 0.9 W/(M·K)
- Density: 2.77 g/cm³
- Radiation resistance and low outgassing
- Water absorption: ≤0.01%
- Easy machinability (drilling, turning, grinding, shearing, etching)
- Superior adhesion between copper foil and dielectric (more reliable than ceramic substrates with vacuum coating)
- Ideal material for Beidou, missile-borne, fuze, and miniaturized antennas
- Stable DK (22±0.88) — Consistent impedance control for high-frequency designs
- Low Df (0.002~0.0025) — Excellent high-frequency performance with minimal signal loss
- No Glass Fiber Reinforcement — Uniform dielectric properties and consistent performance
- Wide Operating Temperature (-100°C to +150°C) — Reliable performance in extreme environments
- Excellent Radiation Resistance & Low Outgassing — Ideal for aerospace and defense applications
- Superior Adhesion — Copper foil adhesion more reliable than ceramic substrates with vacuum coating
- Easy Machinability — Supports drilling, turning, grinding, shearing, etching, and other methods which ceramic substrates cannot achieve
- Cost-Effective — Lower processing cost compared to ceramic substrates
- Immersion Gold Finish — Excellent solderability and corrosion resistance
- Feature — Benefit
- DK 22 ± 0.88 @ 5GHz — High dielectric constant for miniaturized RF designs
- Df 0.002~0.0025 @ 5GHz — Low loss for high-frequency RF and microwave designs
- TCDK: -55 ppm/°C — Stable electrical performance over temperature
- CTE: 35/35/40 ppm/°C — Good dimensional stability
- Thermal conductivity 0.9 W/m/K — Efficient heat removal
- Thermoplastic resin — Easy machinability, cost-effective processing
- Radiation resistance & low outgassing — Ideal for aerospace, missile-borne, and defense applications
- Superior adhesion vs ceramic substrates — More reliable copper foil adhesion, no vacuum coating required
产品图片
规格参数
| Item | Specification |
| Base material | Wangling TP2200 (Polyphenylene oxide + Ceramic) |
| Layer count | 2-layer rigid PCB |
| Board dimensions | 35.65mm x 87mm = 1 PCS, ±0.15mm |
| Minimum Trace/Space | 4/7 mils |
| Minimum Hole Size | 0.4mm |
| Blind vias | No |
| Finished board thickness | 10.9mm |
| Finished Cu weight | 1 oz (1.4 mils) outer layers |
| Via plating thickness | 20 μm |
| Surface finish | Immersion Gold |
| Top Silkscreen | No |
| Bottom Silkscreen | No |
| Top Solder Mask | No |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
Note: The following thicknesses can be produced as either total thickness including copper or dielectric thickness. Please specify when ordering.
| Parameter | Options |
| Standard Thicknesses (mm) | 0.5, 0.8, 1.0, 1.2, 1.5, 2.0, 3.0, 4.0, 5.0, 6.0, 7.0, 8.0, 10.0, 12.0 |
| Thickness Tolerances (mm) | 0.5mm: ±0.04, 0.8mm: ±0.05, 1.0mm: ±0.05, 1.2mm: ±0.05, 1.5mm: ±0.06, 2.0mm: ±0.075, 3.0mm: ±0.1, 4.0mm: ±0.1, 5.0mm: ±0.12, 6.0mm: ±0.12, 7.0mm: ±0.15, 8.0mm: ±0.18, 10.0mm: ±0.2, 12.0mm: ±0.3 |
| Standard Panel Sizes | 150×150mm, 160×160mm, 200×200mm, 170×240mm (tolerance: -2mm) |
| Standard Claddings | ED Copper: 0.018mm (½ oz), 0.035mm (1 oz); additional claddings available |
| DK Options (TP Series) | 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11.0, 16.0, 20.0, 22.0, 25.0 (customizable 3.0-25) |
叠层结构
Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm
Layer: Dielectric, Material: TP2200 Core, Thickness: 0.8 mm
Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm
PCB 统计
Components: 34
Total Pads: 29
Thru Hole Pads: 22
Top SMT Pads: 7
Bottom SMT Pads: 0
Vias: 16
Nets: 1
应用领域
- Beidou navigation systems
- Missile-borne equipment
- Fuzes
- Miniaturized antennas
- High-frequency RF and microwave circuits
- Satellite communication equipment
材料参数
TP2200 Typical Properties
| Property | TP2200 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Composition | PPE / Ceramic (Molded) | — | — | — | Wangling official |
| Dielectric Constant (Process) | 22.0 ± 0.44 | Z | — | 5 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | — | Z | — | — | Wangling design value |
| Dissipation Factor | 0.0022 | Z | — | 5 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -55 | — | ppm/°C | — | Wangling official |
| CTE (Z) | 40 | Z | ppm/°C | — | Wangling official |
| Copper Peel Strength | — | — | lbs/in | — | — |
| Flammability | V-0 | — | — | — | UL 94 |
质量保证
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
Important Process Considerations
This material is not suitable for 260°C thermal shock testing
Cannot be wave soldered
Hand soldering with a constant temperature soldering iron is recommended
Reflow soldering is generally not advised; if necessary, maximum temperature should not exceed 200°C
Multilayer processing requires careful consideration with low-temperature bonding sheets
When temperature exceeds 180°C, the material may deform, copper foil may peel off, and there may be significant changes in electrical performance
PCB processing is convenient — follow standard thermoplastic material processing guidelines for high yield
Processing cost is significantly lower than ceramic substrates
数据来源说明
Dielectric Constant (Typical) is tested in the Z-direction of the material using GB/T 12636-1990 or IPC-TM-650 2.5.5.5 Stripline method.
Other properties are tested using or referencing IPC-TM-650 or GBT4722-2017 standard test methods.
All test data are typical measurement values intended to assist customers in material selection. They do not constitute any express or implied warranty and do not guarantee performance in specific applications. Customers are responsible for verifying the suitability of Wangling materials for each application.
