BICHENGPCBBicheng Technologies Limited

TLX-8 50mil 沉金高频电路板 — PTFE 玻璃纤维微波基材

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

产品简介

Taconic TLX-8 is a high volume fiberglass reinforced microwave substrate, a PTFE fiberglass laminate that offers reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs. TLX-8 PTFE fiberglass laminates are ideal for use in radar systems, mobile communications, microwave test equipment, microwave transmission devices and RF components.

TLX-8 is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as:

  • Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch
  • High temperature exposure in engine modules
  • Radiation resistance in space (see NASA's website for low outgassing materials)
  • Resistance to extreme environments at sea for warship antennas
  • Resistance to a wide temperature range for altimeter substrates during flight

Resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch

High temperature exposure in engine modules

Radiation resistance in space (see NASA's website for low outgassing materials)

Resistance to extreme environments at sea for warship antennas

Resistance to a wide temperature range for altimeter substrates during flight

This 2-layer rigid PCB is constructed with TLX-8 as the core material at 50mil (1.27mm) thickness, with ENIG surface finish, no silkscreen, no solder mask, and 1oz copper on both sides. Its DK of 2.55 offers excellent high-frequency performance with low loss, making it ideal for demanding applications such as radar systems, mobile communications, and microwave test equipment.

TLX-8 offers reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs. TLX-8 PTFE fiberglass laminates are ideal for use in radar systems, mobile communications, microwave test equipment, microwave transmission devices and RF components.

TLX-8 is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as resistance to creep for PWBs bolted to a housing that encounters high levels of vibration during space launch, high temperature exposure in engine modules, radiation resistance in space, resistance to extreme environments at sea for warship antennas, and resistance to a wide temperature range for altimeter substrates during flight.

The wide range of dielectric constants available enable the manufacture of couplers, splitters, combiners, amplifiers, antennas and other components. TLX-8 has a long space heritage and is used wherever a woven fiberglass reinforcement is required.

技术特性与优势

  • Excellent PIM Values — Measured at lower than -160 dBc, ideal for high-performance RF systems
  • Low and Stable DK — Dielectric Constant of 2.55 ± 0.04 @ 10GHz for consistent impedance control
  • Low Dissipation Factor — 0.0018 @ 10GHz for minimal signal loss
  • Excellent Mechanical & Thermal Properties — Reliable under extreme conditions
  • Dimensionally Stable — Low MD/CD after bake and thermal stress
  • Low Moisture Absorption — 0.02% for stable performance in humid environments
  • UL 94 V-0 Rating — Flame retardant for safety compliance
  • Long Space Heritage — Used wherever woven fiberglass reinforcement is required
  • ENIG Finish — Excellent solderability, corrosion resistance, and flat surface
  • Versatile DK Range (2.45-2.65) — Suitable for a wide range of microwave designs
  • Low Layer Count Microwave Designs — Cost-effective for simpler RF circuits
  • PTFE Fiberglass Reinforcement — Mechanical strength for severe environments
  • Excellent PIM Performance (<-160 dBc) — Critical for low intermodulation distortion systems
  • Low Outgassing — TML 0.03%, CVCM 0.00%, WVR 0.01% per ASTM E 595, suitable for space applications
  • High Thermal Decomposition Temperature — Td 535°C (2% weight loss), 553°C (5% weight loss)
  • Wide Thickness Range — Available from 0.0025" to 0.250" (0.064mm to 6.35mm)
  • DK 2.55 ± 0.04 @ 10GHz:Stable dielectric constant for consistent impedance control
  • Df 0.0018 @ 10GHz:Ultra-low loss for high-frequency RF and microwave designs
  • PIM < -160 dBc:Excellent passive intermodulation performance for critical RF systems
  • CTE: 21/23/215 ppm/K:Matched to copper, reliable plated through holes
  • Td: 535°C (2% loss):High thermal stability for demanding environments
  • Low Outgassing (TML 0.03%):NASA compliant, ideal for space applications
  • UL 94 V-0:Flame retardant for safety compliance
  • Moisture Absorption 0.02%:Excellent stability in humid conditions
  • ENIG finish:Excellent solderability, corrosion resistance, flat surface

产品图片

TLX-8 PCB
TLX-8 Material

规格参数

Base materialTaconic TLX-8 (PTFE + Fiberglass)
Layer count2 layers
Board dimensions45mm x 66.04mm = 1 PCS, ±0.15mm
Minimum Trace/Space6/9 mils
Minimum Hole Size0.4mm
Blind viasNo
Finished board thickness1.3mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishENIG
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
ParameterOptions
Dielectric Thickness Range0.0025" - 0.250" (0.064mm - 6.35mm)
Thickness Increments0.005" (0.125mm) increments available
Standard Panel Sizes12"x18" (305x457mm), 16"x18" (406x457mm), 18"x24" (457x610mm), 16"x36" (406x914mm), 24"x36" (610x914mm), 18"x48" (457x1,220mm), 36"x48" (914x1,220mm)
Standard Copper Cladding1oz ED, 1oz RTF, ½oz ED, ½oz rolled
DK Range2.45 - 2.65 (TLX-8)
Special OptionsContact AGC for additional thicknesses, other sizes & any other type of cladding

叠层结构

  • Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
  • Layer: Dielectric, Material: Taconic TLX-8 Core, Thickness: 1.27 mm (50mil)
  • Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)

PCB 统计

  • Components: 13
  • Total Pads: 26
  • Thru Hole Pads: 12
  • Top SMT Pads: 14
  • Bottom SMT Pads: 0
  • Vias: 8
  • Nets: 2

应用领域

  • Radar systems and phased array antennas
  • Mobile communications infrastructure
  • Microwave test equipment and transmission devices
  • Couplers, splitters, combiners, and amplifiers
  • Antennas for aerospace and defense
  • Satellite communication systems
  • RF components and passive devices
  • Warship antennas and naval systems
  • Radar systems and phased array antennas
  • Mobile communications infrastructure
  • Microwave test equipment and transmission devices
  • Couplers, splitters, combiners, and amplifiers
  • Antennas for aerospace and defense
  • Satellite communication systems
  • RF components and passive devices
  • Warship antennas and naval systems

材料参数

TLX Series Typical Properties

PropertyTLX-0TLX-6TLX-7TLX-8TLX-9Dir.UnitsConditionTest Method
Dielectric Constant @ 10 GHz2.452.652.602.552.50——10 GHzIPC-TM-650 2.5.5.3
Dissipation Factor @ 1.9 GHz0.00090.00160.00140.00120.0010——1.9 GHzIPC-TM-650 2.5.5.5.1
Dissipation Factor @ 10 GHz0.00120.00220.00200.00170.0015——10 GHzIPC-TM-650 2.5.5.5.1
Dielectric Breakdown>45>45>45>45>45—kV—IPC-TM-650 2.5.6
Moisture Absorption0.020.020.020.020.02—%—IPC-TM-650 2.6.2.1
Peel Strength (1oz ED)———15——lbs/inAfter thermal stressIPC-TM-650 2.4.8
Surface Resistivity———6.6×10⁸——MΩElevated tempIPC-TM-650 2.5.17.1
Volume Resistivity———1.1×10¹⁰——MΩ·cmElevated tempIPC-TM-650 2.5.17.1
CTE (X) (25–260°C)———21—Xppm/°C25–260°CIPC-TM-650 2.4.41
CTE (Y) (25–260°C)———23—Yppm/°C25–260°CIPC-TM-650 2.4.41
CTE (Z) (25–260°C)———215—Zppm/°C25–260°CIPC-TM-650 2.4.41
Thermal Conductivity———0.19——W/(m·K)—ASTM F433
Density———2.25——g/cm³—ASTM D792
Td (2% weight loss)———535——°CTGAIPC-TM-650 2.4.24.6
FlammabilityV-0V-0V-0V-0V-0———UL94

质量保证

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com