RT/duroid 6202 20mil 沉金高频电路板 — 低损耗 PTFE 层压板
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
产品简介
Rogers RT/duroid 6202 high frequency circuit materials are low loss and low dielectric constant laminates with limited woven glass reinforcement. It offers electrical and mechanical properties essential in designing complex microwave structures that are mechanically reliable and electrically stable. Excellent dimensional stability (0.05 to 0.07 mils/inch) is achieved by the addition of limited woven glass reinforcement. This often eliminates double etching to achieve tight positional tolerances.
Applications particularly suited to the unique properties of RT/duroid 6202 material include flat and non-planar structures such as antennas and complex multilayer circuits with interlayer components.
This 2-layer rigid PCB is constructed with RT/duroid 6202 as the core material at 20mil (0.508mm) thickness, with ENIG surface finish, green top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 2.94 offers excellent high-frequency performance with low loss, making it ideal for demanding applications such as phased array antennas, ground based and airborne radar systems, GPS antennas, power backplanes, and beam forming networks.
Rogers RT/duroid 6202 Material – Product Introduction
RT/duroid 6202 high frequency circuit material is a low loss and low dielectric constant laminate offering superior electrical and mechanical properties essential in designing complex microwave structures which are mechanically reliable and electrically stable.
Excellent dimensional stability (0.05 to 0.07 mils/inch) is achieved by the addition of limited woven glass reinforcement. This often eliminates double etching to achieve tight positional tolerances.
½ oz. to 2 oz./ft.² electrodeposited and rolled copper foil may be specified as cladding on dielectric thicknesses from 0.005" to 0.060" (0.127 to 1.524 mm).
Applications particularly suited to the unique properties of RT/duroid 6202 material include flat and non-planar structures such as antennas and complex multilayer circuits with interlayer components.
技术特性与优势
- Dielectric Constant (Dk): 2.94 ± 0.04 (≥0.020" laminates) at 10GHz/23°C
- DK of 0.005" laminates: 3.06 ± 0.04
- DK of 0.010" and 0.015" laminates: 3.02 ± 0.04
- Dissipation Factor (Df): 0.0015 at 10GHz/23°C
- Low Thermal Coefficient of Dk: 5 ppm/°C at 10GHz (-50°C to +150°C)
- CTE (-55 to 288°C): X-axis 15 ppm/°C, Y-axis 15 ppm/°C, Z-axis 30 ppm/°C
- Td: 500°C TGA
- Thermal Conductivity: 0.68 W/(M·K)
- Moisture Absorption: 0.04%
- UL 94-V0 Flammability Rating
- Excellent dimensional stability (0.05 to 0.07 mils/inch)
- Limited woven glass reinforcement
- Low Loss — Excellent high frequency performance with minimal signal loss
- In-plane Expansion Coefficient Matched to Copper — Reliable plated through holes
- Excellent Electrical and Mechanical Properties — Mechanically reliable and electrically stable
- Very Low Etch Shrinkage — Tight positional tolerances, often eliminating double etching
- Excellent Dimensional Stability (0.05 to 0.07 mils/inch) — Consistent performance
- Low Thermal Coefficient of Dk (5 ppm/°C) — Stable electrical performance over temperature
- Low Moisture Absorption (0.04%) — Stable performance in humid environments
- ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability
- DK 2.94 ± 0.04 @ 10GHz (≥0.020"):Stable dielectric constant for consistent impedance control
- Df 0.0015 @ 10GHz:Low loss for high-frequency RF and microwave designs
- TCDK: 5 ppm/°C:Extremely low thermal coefficient of dielectric constant
- CTE: 15/15/30 ppm/°C:In-plane expansion coefficient matched to copper
- Td: 500°C TGA:High thermal stability for demanding environments
- Thermal Conductivity 0.68 W/m/K:Efficient heat removal
- Moisture Absorption 0.04%:Excellent stability in humid conditions
- UL 94 V-0:Flame retardant for safety compliance
- Excellent dimensional stability:Very low etch shrinkage, tight positional tolerances
- ENIG finish:Excellent solderability, corrosion resistance, wire bondability
产品图片
规格参数
| Base material | Rogers RT/duroid 6202 (PTFE + Limited Woven Glass Reinforcement) |
| Layer count | 2-layer rigid PCB |
| Board dimensions | 42.36mm x 21.9mm = 1 PCS |
| Minimum Trace/Space | 4/7 mils |
| Minimum Hole Size | 0.4mm |
| Blind vias | No |
| Finished board thickness | 0.6mm |
| Finished Cu weight | 1 oz (35 μm / 1.4 mils) outer layers |
| Via plating thickness | 20 μm |
| Surface finish | ENIG |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | Green |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
| Parameter | Options |
| Dielectric Thickness Range | 0.005" to 0.060" (0.127mm to 1.524mm) |
| Standard Copper Cladding | ½ oz. to 2 oz./ft.² electrodeposited and rolled copper foil |
| Special Options | Contact Rogers Corporation for additional thicknesses, other sizes & any other type of cladding |
叠层结构
Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
Layer: Dielectric, Material: Rogers RT/duroid 6202 Substrate, Thickness: 0.508 mm (20mil)
Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)
PCB 统计
- Components: 13
- Total Pads: 20
- Thru Hole Pads: 11
- Top SMT Pads: 9
- Bottom SMT Pads: 0
- Vias: 6
- Nets: 2
应用领域
- Phased Array Antennas
- Ground Based and Airborne Radar Systems
- Global Positioning System Antennas
- Power Backplanes
- Commercial Airline Collision Avoidance
- Beam Forming Networks
- High Reliability Complex Multilayer Circuits
- Phased Array Antennas
- Ground Based and Airborne Radar Systems
- Global Positioning System Antennas
- Power Backplanes
- Commercial Airline Collision Avoidance
- Beam Forming Networks
- High Reliability Complex Multilayer Circuits
材料参数
RT/duroid 6202 Typical Properties
| Property | RT/duroid 6202 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant εr | 2.94 ± 0.04 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Dissipation Factor, tan δ | 0.0015 | Z | — | 10 GHz / 23°C | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | +5 | Z | ppm/°C | 10 GHz, -50 to +150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 10⁶ | Z | MΩ·cm | Condition A | ASTM D257 |
| Surface Resistivity | 10⁹ | Z | MΩ | Condition A | ASTM D257 |
| Moisture Absorption | 0.04 | — | % | D23/24, D48/50 | IPC-TM-650 2.6.2.1 |
| Thermal Conductivity | 0.68 | — | W/(m·K) | 80°C | ASTM C518 |
| CTE (X / Y) | 15 / 15 | X/Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 30 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Td | 500 | — | °C (TGA) | — | ASTM D3850 |
| Density | 2.1 | — | g/cm³ | — | ASTM D792 |
| Specific Heat | 0.93 (0.22) | — | J/g·K | — | Calculated |
| Copper Peel Strength | 9.1 (1.6) | — | lbs/in (N/mm) | — | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
质量保证
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
