Rogers RT/Duroid 5870 15mil (0.381mm) 高频电路板,适用于微带与带状线电路
(Note: Printed Circuit Boards (PCBs) are custom-made products. The images and specifications provided are for reference only.)
产品简介
Rogers RT/Duroid 5870 is a high-frequency material made from glass microfiber reinforced PTFE composites, specifically engineered for demanding stripline and microstrip circuit applications. Its exceptional dielectric constant uniformity is achieved through randomly oriented microfibers, ensuring consistency across panels and stability over a wide frequency range. With a low dissipation factor, RT/Duroid 5870 is suitable for use in Ku-band applications and beyond. The material can be easily cut, sheared, and machined into various shapes, and it exhibits resistance to all solvents and reagents, both hot and cold, typically used in the etching of printed circuits or in plating edges and holes.
技术特性与优势
- Low Dissipation Factor: Extends the usability of RT/Duroid 5870 in Ku-band applications and beyond.
- Machinability: The material can be easily cut, sheared, and machined to precise shapes.
- Chemical Resistance: It is resistant to all solvents and reagents, whether hot or cold, that are typically used in etching printed circuits or plating edges and holes.
产品图片
规格参数
Rogers RT/Duroid 5870 15mil 0.381mm High Frequency PCB for Microstrip and Stripline Circuits
| PCB SIZE | 95 x 67mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | YES |
| Minimum Trace and Space: | 5.5 mil / 5 mil |
| Minimum / Maximum Holes: | 0.3 mm / 5.2 mm |
| Number of Different Holes: | 9 |
| Number of Drill Holes: | 102 |
| BOARD MATERIAL | — |
| Glass Epoxy: | RT/duroid 5870 0.381mm |
| Final foil external: | 1.5 oz |
| Final height of PCB: | 0.4 mm ±0.1 |
| PLATING AND COATING | — |
| Surface Finish | ENIG |
| VIA | Plated through hole(PTH), minimum size 0.3mm. Solder mask uncovered |
| TEST | 100% Electrical Test prior shipment |
| SERVICE AREA | Worldwide, Globally. |
叠层结构
- copper ------- 35um(1 oz)+plate TOP layer
- RT/duroid 5870 0.381mm
- copper ------- 35um(1oz)+plate BOT Layer
应用领域
- Commercial airline broadband antennas
- Microstrip circuits
- Stripline circuits
- Millimeter wave applications
- Military radar systems
- Missile guidance systems
- Point-to-point digital radio antennas
材料参数
RT/duroid 5870 Typical Properties
| Property | RT/duroid 5870 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant, εr (Process) | 2.332.33±0.02 spec. | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Dielectric Constant, εr (Design) | 2.33 | Z | — | 8 GHz – 40 GHz | Differential Phase Length Method |
| Dissipation Factor, tan δ | 0.00050.0012 | Z / Z | — | C24/23/50 | 1 MHz IPC-TM-650 2.5.5.310 GHz IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | -115 | Z | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 × 10⁷ | Z | MΩ·cm | C96/35/90 | ASTM D257 |
| Surface Resistivity | 2 × 10⁷ | Z | MΩ | C96/35/90 | ASTM D257 |
| Specific Heat | 0.96 (0.23) | — | J/g·K (cal/g·°C) | — | Calculated |
| Moisture Absorption | 0.02 | — | % | 0.062" (1.6mm) D48/50 | ASTM D570 |
| Thermal Conductivity | 0.22 | Z | W/(m·K) | 80°C | ASTM C518 |
| CTE (X) | 22 | X | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 28 | Y | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 173 | Z | ppm/°C | 0–100°C | IPC-TM-650 2.4.41 |
| Td (Decomposition Temp.) | 500 | — | °C (TGA) | — | ASTM D3850 |
| Density | 2.2 | — | g/cm³ | — | ASTM D792 |
| Copper Peel Strength | 27.2 (4.8) | — | pli (N/mm) | 1 oz EDC foil after solder float | IPC-TM-650 2.4.8 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
