BICHENGPCBBicheng Technologies Limited

Rogers DiClad 870 微波电路板 — 31mil 93mil 125mil 编织玻璃纤维增强 PTFE 电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

材料
Rogers DiClad 870 (Woven Fiberglass/PTFE) / 31-125mil
起订量
1PCS
交期
7-13 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

(Printed Circuit Boards are custom-made products; the images and parameters shown are for reference only.)

The Rogers DiClad 870 Microwave PCB is a high-performance circuit board designed for RF and microwave applications. Built on Rogers DiClad 870 laminates, this PCB features woven fiberglass/PTFE composites that provide excellent dimensional stability and low dielectric constant (Dk 2.33 at 10 GHz and 1 MHz). With a low dissipation factor of 0.0013 at 10 GHz, the DiClad 870 PCB ensures minimal signal loss, making it ideal for high-frequency systems. Available in 31mil, 93mil, and 125mil thicknesses, it is suitable for a wide range of applications, including phased arrays, radar systems, and base station antennas.

1. Low Dielectric Constant (Dk): 2.33 at 10 GHz and 1 MHz for superior signal integrity. 2. Low Dissipation Factor (Df): 0.0013 at 10 GHz, ensuring minimal signal loss. 3. Low Moisture Absorption: Among the lowest for PTFE-based composites, enhancing reliability. 4. Stable Dk Over Frequency: Ensures easy design transition and scalability. 5. Low Dk Supports Wider Line Widths: Reduces insertion loss for better performance. 6. Copper-Matched CTE: Matches the coefficient of thermal expansion in the X and Y axes for reduced stress. 7. Excellent Outgassing Values: Meets TML, CVCM, and WVR standards for space applications. 8. UL94-V0 Compliance: Meets flammability standards for safety.

1. Commercial Phased Array Networks2. Digital Radio Antennas3. Filters, Couplers, and LNAs (Low Noise Amplifiers)4. Guidance Systems5. Low Loss Base Station Antennas6. Radar Feed Networks

Rogers DiClad 870 Microwave PCB
DiClad 870 Applications

规格参数

PCB Capability (DiClad 870)

PCB materialWoven Fiberglass reinforced PTFE Laminates
DesignationDiClad 870
Dielectric constant2.33
Layer countSingle-sided PCB, Double-sided PCB, Multi-layer PCB, Hybrid PCB
Dielectric thickness31mil (0.787mm), 93mil (2.286mm), 125mil (3.175mm)
Copper weight1oz (35µm), 2oz (70µm)
板尺寸≤400mm X 500mm
Solder maskGreen, Black, Blue, Red, Yellow etc.
表面处理Immersion gold, HASL, Immersion silver, Immersion tin, Bare copper, OSP, ENEPIG, Pure gold plated etc.

典型性能参数:DiClad 870

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
DiClad 870
PropertiesTest ConditionsTypical ValueUnitsTest Method
ELECTRICAL PROPERTIES
Dielectric Constant23°C @ 50% RH, 10 GHz2.33-IPC TM-650 2.5.5.5
Dielectric Constant23°C @ 50% RH, 1 MHz2.33-IPC TM-650 2.5.5.3
Dissipation Factor23°C @ 50% RH, 10 GHz0.0013-IPC TM-650 2.5.5.5
Dissipation Factor23°C @ 50% RH, 1 MHz0.0009-IPC TM-650 2.5.5.3
Thermal Coefficient of Dielectric Constant-10 to 140°C, 10 GHz-161ppm/°CIPC TM-650 2.5.5.5
Volume ResistivityC96/35/901.5 x 10⁹MΩ-cmIPC TM-650 2.5.17.1
Surface ResistivityC96/35/903.4 x 10⁷MΩIPC TM-650 2.5.17.1
Dielectric BreakdownD48/50>45kVASTM D-149
Arc Resistance->180-ASTM D-495
THERMAL PROPERTIES
Coefficient of Thermal Expansion - x50°C to 150°C17ppm/°CIPC TM-650 2.4.41
Coefficient of Thermal Expansion - y50°C to 150°C29ppm/°CIPC TM-650 2.4.41
Coefficient of Thermal Expansion - z50°C to 150°C217ppm/°CIPC TM-650 2.4.24
Thermal Conductivity-0.26W/(m·K)ASTM E1461
MECHANICAL PROPERTIES
Copper Peel Strength10s @ 288°C, 35 μm foil14lbs/inIPC TM-650 2.4.8
Young's Modulus23°C @ 50% RH485, 346kpsiASTM D-638
Tensile Strength (MD, CMD)23°C @ 50% RH14.9, 11.2kpsiASTM D-882
Compressive Modulus23°C @ 50% RH327kpsiASTM D-695
Flex Modulus23°C @ 50% RH437kpsiASTM D-3039
PHYSICAL PROPERTIES
FlammabilityC48/23/50 & C168/70V-0-UL 94
Moisture AbsorptionE1/105+D24/230.02%IPC TM-650 2.6.2.2
DensityC24/23/50, Method A2.26g/cm³ASTM D792
NASA Outgassing - Total Mass Lost125°C, ≤10⁻⁶ torr0.02%NASA SP-R-0022A
NASA Outgassing - Collected Volatiles125°C, ≤10⁻⁶ torr0.00%NASA SP-R-0022A
NASA Outgassing - Water Vapor Recovered125°C, ≤10⁻⁶ torr0.01%NASA SP-R-0022A

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com