BICHENGPCBBicheng Technologies Limited

Rogers AD255C DK2.55 Df0.0013 (0.020-0.125") 天线级层压板

产品简介

The AD Series antenna materials from Rogers Corporation are high-performance, specialty glass-reinforced PTFE-based laminates engineered for wireless antenna markets. AD255C provides controlled dielectric constant (2.55), low loss performance (Df 0.0013), and excellent passive intermodulation (PIM) performance. The woven glass reinforcement affords good circuit processability and enables high-yield circuit board fabrication.

技术特性与优势

  1. 1.Glass-Reinforced PTFE Composite: Provides excellent processability and mechanical strength for reliable PCB fabrication.
  2. 2.Controlled Dielectric Constant: Dk = 2.55 ±0.04 at 10 GHz, ensuring consistent impedance control.
  3. 3.Very Low Loss: Df of 0.0013 at 10 GHz, minimizing signal attenuation in high-frequency applications.
  4. 4.Excellent Passive Intermodulation (PIM) Performance: -159/-163 dBc, critical for base station antennas and communication systems.
  5. 5.Very Low Moisture Absorption: 0.03%, maintaining electrical properties in humid environments.
  6. 6.Very High Copper Peel Strength: >13.6 lbs/in, ensuring reliable conductor adhesion.
  7. 7.Available with Standard ED or Reverse-Treated ED Copper Foil Options: Flexibility for different application requirements.
  8. 8.UL 94 V-0 Flammability Rating: Meets industry safety standards for flame resistance.

应用领域

  • Base Station Antennas: Specifically engineered for today's wireless antenna markets requiring high performance and low PIM.
  • Passive Components: Mixers, splitters, filters, and combiners for RF front-end systems.
  • Feed Networks: Signal distribution networks for antenna arrays.
  • RF Identification Tags: High-frequency RFID applications.
  • Radar Systems: Automotive, defense, and weather radar applications.
  • Mobile Communications Infrastructure: 4G/LTE and 5G base station equipment.
Rogers AD255C Laminate

典型性能参数:AD255C

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
AD255C
PropertiesTypical ValueUnitsTest ConditionsTest Method
Electrical Properties
Dielectric Constant (process)2.55-23°C @ 50% RH, 10 GHzIPC TM-650 2.5.5.5
Dielectric Constant (design)2.60-C-24/23/50, 10 GHzMicrostrip Differential Phase Length
Dissipation Factor0.0013-23°C @ 50% RH, 10 GHzIPC TM-650 2.5.5.5
Thermal Coefficient of Dk-110ppm/°C0 to 100°C, 10 GHzIPC TM-650 2.5.5.5
Volume Resistivity7.4 x 10⁸MΩ·cmC96/35/90IPC TM-650 2.5.17.1
Surface Resistivity3.6 x 10⁷MΩC96/35/90IPC TM-650 2.5.17.1
Electrical Strength911V/mil-IPC TM-650 2.5.6.2
Dielectric Breakdown>40kVD-48/50, X/Y directionIPC TM-650 2.5.6
PIM²-159 / -163dBcReflected 43 dBm swept tones at 1900 MHz S1/S1Rogers Internal 50 ohm
Thermal Properties
Decomposition Temperature (Td)>500°C2hrs @ 105°C, 5% Weight LossIPC TM-650 2.3.40
CTE - x34ppm/°C-55°C to 288°CIPC TM-650 2.4.41
CTE - y26ppm/°C-55°C to 288°CIPC TM-650 2.4.41
CTE - z196ppm/°C-55°C to 288°CIPC TM-650 2.4.41
Thermal Conductivity0.35W/(m·K)z directionASTM D5470
Time to Delamination>60minutesas-received, 288°CIPC TM-650 2.4.24.1
Mechanical Properties
Copper Peel Strength2.4 (13.6)N/mm (lbs/in)10s @ 288°C, 35 μm foilIPC TM-650 2.4.8
Flexural Strength (MD/CMD)60.7 / 44.1 (8.8 / 6.4)MPa (ksi)25°C ± 3°CASTM D790
Tensile Strength (MD, CMD)55.8 / 45.5 (8.1 / 6.6)MPa (ksi)23°C @ 50% RHASTM D3039/D3039-14
Flex Modulus6,412 / 5,640 (930 / 818)MPa (ksi)25°C ± 3°CIPC-TM-650 2.4.4
Dimensional Stability (MD, CMD)0.03 / 0.07mils/inchafter etch + bakeIPC-TM-650 2.4.39a
Physical Properties
FlammabilityV-0--UL 94
Moisture Absorption0.03%E1/105 + D48/50IPC TM-650 2.6.2.1
Density2.28g/cm³C24/23/50ASTM D792
Specific Heat Capacity0.813J/g·°K2 hours at 105°CASTM E2716

可选规格

  • Standard Thicknesses: 0.020" (0.508 mm) +/- 0.002", 0.030" (0.762 mm) +/- 0.002", 0.040" (1.016 mm) +/- 0.002", 0.060" (1.524 mm) +/- 0.002", 0.125" (3.175 mm) +/- 0.006".
  • Standard Panel Sizes: For 0.020": 18" x 12" (457mm x 305mm), 18" x 24" (457mm x 610mm). For all other thicknesses: 12" x 18" (305 x 457 mm), 24" x 18" (610 x 457 mm).
  • Standard Claddings: Electrodeposited Copper Foil: ½ oz. (18µm), 1 oz. (35µm). Reverse Treated Electrodeposited Copper Foil: ½ oz. (18µm), 1 oz. (35µm).
  • Custom Configurations: Contact Customer Service or Sales Engineering for other available product configurations including additional thicknesses, panel sizes and claddings.

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com