BICHENGPCBBicheng Technologies Limited

Rogers AD250C 高频电路板 — 20mil (0.508mm) 双层天线电路板,镀纯金

(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)

产品简介

Rogers' AD250C antenna laminates are high-performance, specialty materials designed specifically to meet the needs of today's wireless antenna markets.

These laminates are made from glass-reinforced, PTFE-based materials that offer a controlled dielectric constant, low loss performance, and excellent passive intermodulation (PIM) characteristics. The woven glass reinforcement enhances circuit processability, enabling efficient circuit board production with high yields.

AD250C antenna materials come with options for standard electrodeposited (ED) or reverse treated ED copper foil, allowing for choices that help minimize circuit losses and improve antenna PIM.

This 2-layer rigid PCB is constructed entirely with AD250C as the core material at 20mil (0.508mm) thickness, with pure gold surface finish, green top and bottom solder mask, yellow top silkscreen, and 1oz copper on both sides. Its DK of 2.5 offers excellent high-frequency performance, making it ideal for demanding applications such as cellular infrastructure base station antennas, automotive telematics antenna systems, and commercial satellite radio antennas.

Rogers AD250C Material – Product Introduction

The AD Series™ antenna materials from Rogers Corporation are high performance, specialty materials that are specifically engineered and manufactured to meet the demands of today's wireless antenna market. The AD Series antenna products are glass-reinforced, PTFE based materials that provide controlled dielectric constant, low loss performance, and very good passive intermodulation (PIM) performance. The woven glass reinforcement affords good circuit processability and enables high yield circuit board fabrication.

The AD Series antenna products are manufactured with many dielectric constant options to meet the wide variety of needs for today's antenna requirements. These options and tight control help to enable the circuit to meet the desired impedance every time.

All AD Series antenna products are offered with standard electrodeposited (ED) or reverse treated ED copper foil options. This provides choices that are sufficient to help reduce both circuit losses and antenna PIM.

Lastly, as PTFE based composites, the AD Series antenna materials have very low loss (typically less than 0.002 at 10 GHz), very low moisture absorption (less than 0.1%), and very high copper peel strength (greater than 10 pli). These features combined together make the AD Series laminates an ideal choice for antenna applications.

技术特性与优势

  • Dielectric Constant (DK): 2.5 ± 0.04 at 10GHz
  • Dissipation Factor (Df): 0.0013 at 10GHz
  • Thermal Conductivity: 0.33 W/m/°K
  • CTE: X-axis 47 ppm/°C, Y-axis 29 ppm/°C, Z-axis 196 ppm/°C
  • High Tg: >280°C
  • Low Water Absorption: 0.04%
  • UL 94 V-0 Rated
  • Glass-reinforced, PTFE-based material
  • Standard ED or reverse treated ED copper foil options
  • Low Loss Tangent (<0.002 at 10 GHz) — Excellent circuit performance in all typical wireless frequency bands
  • Controlled Dielectric Constant (±0.05) — Repeatable circuit performance
  • Very Low PIM (-159 dBc at 30 mil, 1900 MHz) — Excellent antenna performance and reduced yield loss due to PIM related issues
  • Excellent Dimensional Stability — Repeatable circuit performance and improved manufacturing yields
  • High Tg (>280°C) — Excellent thermal stability
  • Low Water Absorption (0.04%) — Stable performance in humid environments
  • Pure Gold Finish — Excellent solderability, corrosion resistance, and wire bondability
  • DK 2.5 ± 0.04 @ 10GHz:Stable dielectric constant for consistent impedance control
  • Df 0.0013 @ 10GHz:Low loss for high-frequency RF and microwave designs
  • Very Low PIM (-159 dBc at 30 mil, 1900 MHz):Excellent antenna performance and reduced yield loss
  • CTE: 47/29/196 ppm/°C:Good dimensional stability
  • Tg: >280°C:High thermal stability for demanding environments
  • Thermal Conductivity 0.33 W/m/K:Efficient heat removal
  • Moisture Absorption 0.04%:Excellent stability in humid conditions
  • UL 94 V-0:Flame retardant for safety compliance
  • Pure Gold finish:Excellent solderability, corrosion resistance, wire bondability

产品图片

AD250C PCB
AD250C Material

规格参数

Base materialRogers AD250C (Glass-reinforced, PTFE-based)
Layer count2-layer boards
Board dimensions55.36mm x 76.2mm = 1 PCS, ±0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.4mm
Blind vias / Buried viasNo
Finished board thickness0.6mm
Finished Cu weight1 oz outer layers
Via plating thickness20 μm
Surface finishPure Gold
Top SilkscreenYellow
Bottom SilkscreenNo
Top Solder MaskGreen
Bottom Solder MaskGreen
100% Electrical testUsed prior to shipment
ParameterOptions
Standard Thicknesses0.020" (0.508 mm) ±0.002", 0.030" (0.762 mm) ±0.002", 0.060" (1.524 mm) ±0.003"
Standard Panel SizesAD250C .020": 18" x 12" (457mm x 305mm), 18" x 24" (457mm x 610mm); All Other Thicknesses: 12" X 18" (305 X 457 mm), 24" X 18" (610 X 457 mm)
Standard CladdingsElectrodeposited Copper Foil ½ oz. (18μm), 1oz. (35μm); Reverse Treated Electrodeposited Copper Foil ½ oz. (18μm), 1oz. (35μm)
Special OptionsContact Customer Service or Sales Engineering to inquire about other available product configurations including additional thicknesses, panel sizes and claddings

叠层结构

  • Layer:Copper_layer_1 (Top);Material:Copper;Thickness:35 μm
  • Layer:Dielectric;Material:AD250C Substrate;Thickness:0.508 mm (20mil)
  • Layer:Copper_layer_2 (Bottom);Material:Copper;Thickness:35 μm

PCB 统计

  • Components:36
  • Total Pads:51
  • Thru Hole Pads:24
  • Top SMT Pads:27
  • Bottom SMT Pads:0
  • Vias:49
  • Nets:2

应用领域

  • Cellular infrastructure base station antenna
  • Automotive telematics antenna systems
  • Commercial satellite radio antenna
  • Wireless antenna applications
  • Cellular infrastructure base station antenna
  • Automotive telematics antenna systems
  • Commercial satellite radio antenna
  • Wireless antenna applications

材料参数

AD250C Typical Properties

PropertyAD250CDir.UnitsConditionTest Method
Dielectric Constant (Design)2.50——10 GHzMicrostrip / Differential Phase Length
Dissipation Factor0.0013——10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-117—ppm/°C0 to 100°C, 10 GHzIPC-TM-650 2.5.5.5
Volume Resistivity4.8 × 10⁸—MΩ·cmC96/35/90IPC-TM-650 2.5.17.1
Dielectric Breakdown>40—kVD-48/50IPC-TM-650 2.5.6
Td>500—°C2 hrs @ 105°CIPC-TM-650 2.3.40
CTE (X)47Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)29Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)196Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Thermal Conductivity0.33ZW/(m·K)—ASTM D5470
Copper Peel Strength2.6 (14.8)—N/mm (lbs/in)10s @ 288°CIPC-TM-650 2.4.8
Moisture Absorption0.04—%E1/105+D48/50IPC-TM-650 2.6.2.1
Density2.28—g/cm³C24/23/50ASTM D792
FlammabilityV-0———UL94

质量保证

  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment
  • Type of artwork supplied: Gerber RS-274-X
  • Accepted standard: IPC-Class-2
  • Availability: Worldwide
  • 100% Electrical test prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com