BICHENGPCBBicheng Technologies Limited

Rogers AD1000 电路板 — 高频双面、沉金

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

材料
Rogers AD1000 (Woven Glass Reinforced PTFE/Ceramic Filled) / 6-127mil
起订量
1PCS
交期
7-13 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

Introducing the Rogers AD1000 Printed Circuit Board, a cutting-edge solution in the realm of high frequency PCBs. Engineered with a high dielectric constant of 10.2, this woven glass reinforced laminate is designed to facilitate circuit miniaturization while maintaining superior dimensional stability and mechanical robustness compared to traditional low loss materials. The immersion gold surface finish provides excellent solderability and corrosion resistance, making it ideal for demanding RF and microwave applications.

High Dielectric Constant: Exceptional performance with a Dk of 10.2. Thermal Conductivity: 0.81 W/mK for effective heat management. Copper Peel Strength: High peel strength allows for thinner etched line widths. Insertion Loss: Minimal insertion loss for improved signal integrity. Panel Sizes: Available in larger panel sizes to accommodate diverse applications. Moisture Absorption: Low moisture absorption at just 0.03%. Reliability: Excellent CTE values enhance the reliability of ceramic component attachment and PTH.

Aircraft Collision Avoidance Systems (TCAS)Ground Based Radar Surveillance SystemsLow Noise Amplifiers (LNAs)Miniaturized Circuitry & Patch AntennasPower Amplifiers (PAs)Radar Modules and ManifoldsX-Band and Below Applications

Rogers AD1000 High Frequency PCB
DF vs Frequency
DF vs Frequency
DK vs Frequency

规格参数

PCB MaterialWoven Glass Reinforced PTFE/Ceramic Filled
DesignationAD1000
Dielectric constant10.2
Dissipation Factor0.0023 @10GHz
Layer countDouble Sided PCB, Multilayer PCB, Hybrid PCB
Copper weight1oz (35µm), 2oz (70µm)
PCB thickness6mil, 10.5mil, 15mil, 20mil, 25mil, 30mil, 50mil, 59mil, 125mil, 127mil
板尺寸≤400mm X 500mm
Solder maskGreen, Black, Blue, Yellow, Red etc.
表面处理Bare copper, HASL, ENIG, Immersion silver, Immersion tin, ENEPIG, Pure gold, OSP etc.

典型性能参数:AD1000

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
Data sheet of value
属性数值单位方向条件测试标准
Dielectric Constant @ 10 GHz10.2———IPC TM-650 2.5.5.5
Dissipation Factor @ 10 GHz0.0023———IPC TM-650 2.5.5.5
Thermal Conductivity0.81 W/mK———ASTM E1461
CTE (x,y) 50-150°C8, 10 ppm/°C———IPC TM-650 2.4.41
CTE (z) 50-150°C20 ppm/°C———IPC TM-650 2.4.24
Copper Peel Strength>12 lb/in (2.1 N/mm)———IPC TM-650 2.4.8
Water Absorption0.03%———IPC TM-650 2.6.2.1
FlammabilityMeets V0———UL-94

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com