Rogers 30mil 0.762mm TMM10 射频电路板、沉金,适用于滤波器与耦合器
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
产品简介
Rogers' TMM10 thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high reliability in plated-thru-hole stripline and microstrip applications. These laminates effectively combine the benefits of both ceramic and traditional PTFE microwave circuit laminates without requiring specialized production techniques.
TMM10 laminates have an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. Their isotropic coefficients of thermal expansion are closely matched to copper, allowing for reliable production of plated-through holes and minimizing etch shrinkage. Additionally, the thermal conductivity of TMM10 laminates is about twice that of traditional PTFE/ceramic laminates, enhancing heat removal.
As these laminates are based on thermoset resins, they do not soften when heated, allowing wire bonding of component leads to circuit traces without concerns about pad lifting or substrate deformation.
产品图片
应用领域
- Chip Testers
- Dielectric Polarizers and Lenses
- Filters and Couplers
- Global Positioning Systems Antennas
- Patch Antennas
- Power Amplifiers and Combiners
- RF and Microwave Circuitry
- Satellite Communication Systems
制造能力
PCB Capability (TMM10)
| PCB Material: | Ceramic, Hydrocarbon, Thermoset Polymer Composites |
| Designation: | TMM10 |
| Dielectric constant: | 9.20 ± 0.23 |
| Layer count: | Single Layer, Double Layer, Multilayer, Hybrid PCB |
| Copper weight: | 1oz, 2oz |
| PCB thickness: | 15mil,20mil,25mil,30mil,50mil,60mil,75mil,100mil,125mil,150mil,200mil,250mil,275mil,300mil,500mil |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Immersion Silver, Immersion Tin, ENEPIG, Pure Gold, OSP etc. |
材料参数
TMM 10 Typical Properties
| Property | TMM 10 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 9.20 ± 0.23 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 9.8 | Z | — | — | Microstrip |
| Dissipation Factor | 0.0022 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -38 | — | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 × 10⁸ | — | MΩ·cm | Condition A | ASTM D257 |
| Surface Resistivity | 4 × 10⁷ | — | MΩ | Condition A | ASTM D257 |
| Moisture Absorption | 0.09 | — | % | D24/50 | ASTM D570 |
| Thermal Conductivity | 0.76 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 21 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 21 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 20 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.9) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 2.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
