Rogers 25mil 0.635mm TMM10 微波电路板,化学金与绿色阻焊,适用于介质极化器与透镜
(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)
产品简介
Rogers' TMM10 thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high reliability in plated-thru-hole stripline and microstrip applications. These laminates combine the advantages of both ceramic and traditional PTFE microwave circuit laminates without needing specialized production techniques.
TMM10 laminates feature an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. The isotropic coefficients of thermal expansion are closely matched to copper, facilitating the production of high-reliability plated-through holes and minimizing etch shrinkage. Additionally, the thermal conductivity of TMM10 laminates is approximately twice that of traditional PTFE/ceramic laminates, enhancing heat dissipation.
As TMM10 laminates are based on thermoset resins, they do not soften when heated. This characteristic allows for wire bonding of component leads to circuit traces without concerns about pad lifting or substrate deformation.
产品图片
应用领域
- Chip Testers
- Dielectric Polarizers and Lenses
- Filters and Couplers
- Global Positioning Systems Antennas
- Patch Antennas
- Power Amplifiers and Combiners
- RF and Microwave Circuitry
- Satellite Communication Systems
制造能力
PCB Capability (TMM10)
| PCB Material: | Ceramic, Hydrocarbon, Thermoset Polymer Composites |
| Designation: | TMM10 |
| Dielectric constant: | 9.20 ± 0.23 |
| Layer count: | Single Layer, Double Layer, Multilayer, Hybrid PCB |
| Copper weight: | 1oz, 2oz |
| PCB thickness: | 15mil,20mil,25mil,30mil,50mil,60mil,75mil,100mil,125mil,150mil,200mil,250mil,275mil,300mil,500mil |
| PCB size: | ≤400mm X 500mm |
| Solder mask: | Green, Black, Blue, Yellow, Red etc. |
| Surface finish: | Bare copper, HASL, ENIG, Immersion Silver, Immersion Tin, ENEPIG, Pure Gold, OSP etc. |
材料参数
TMM 10 Typical Properties
| Property | TMM 10 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 9.20 ± 0.23 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 9.8 | Z | — | — | Microstrip |
| Dissipation Factor | 0.0022 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -38 | — | ppm/°C | -50 to 150°C | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 2 × 10⁸ | — | MΩ·cm | Condition A | ASTM D257 |
| Surface Resistivity | 4 × 10⁷ | — | MΩ | Condition A | ASTM D257 |
| Moisture Absorption | 0.09 | — | % | D24/50 | ASTM D570 |
| Thermal Conductivity | 0.76 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 21 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 21 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 20 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.0 (0.9) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 2.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
