BICHENGPCBBicheng Technologies Limited

Rogers 200mil 5.08mm TMM10 微波电路板、沉金,适用于贴片天线

(Printed Circuit Boards are custom-made products, the picture and parameters shown are just for reference)

产品简介

Rogers 200mil 5.08mm TMM10 Microwave PCBs with ENIG for Patch Antennas. TMM10 thermoset microwave materials offer the benefits of both PTFE and ceramic based substrates, but is not limited by the same mechanical properties and production techniques.

TMM10 laminates feature an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. The isotropic coefficients of thermal expansion are closely matched to copper, facilitating the production of high-reliability plated-through holes and minimizing etch shrinkage. Additionally, the thermal conductivity of TMM10 laminates is approximately twice that of traditional PTFE/ceramic laminates, enhancing heat dissipation.

As TMM10 laminates are based on thermoset resins, they do not soften when heated. This characteristic allows for wire bonding of component leads to circuit traces without concerns about pad lifting or substrate deformation.

技术特性与优势

  • Dielectric Constant (Dk) of 9.20 +/- .230
  • Dissipation factor of .0022 at 10GHz
  • Thermal coefficient of Dk of -38 ppm/°K
  • Coefficient of thermal expansion matched to copper
  • Decomposition Temperature (Td) of 425 °C TGA
  • Coefficient of Thermal Expansion - x y z : 21ppm/K, 21ppm/K, 20ppm/K
  • Thermal Conductivity of 0.76W/mk
  • Available in a thickness range of .0015 to .500 inches +/- .0015"
  • Mechanical properties resist creep and cold flow
  • Resistant to process chemicals, reducing damage during fabrication
  • Material does not require a sodium napthanate treatment prior to electroless plating
  • Based on a thermoset resin, allowing for reliable wire-bonding
  • Wide range of dielectric constants — ideal for single material systems on a wide variety of applications
  • Exceptional mechanical properties — resist creep and cold flow
  • High reliability of plated through holes
  • Resistant to process chemicals — reduces damage to material during fabrication and assembly processes
  • Thermoset resin — reliable wirebonding
  • No specialized production techniques required
  • TMM10 and 10 laminates can replace alumina substrates

产品图片

TMM10 PCB
TMM10 PCB

规格参数

Base materialTMM10
Layer countDouble sided
Board dimensions63.9mm x 48mm = 1 PCS, ±0.15mm
Minimum Trace/Space4/7 mils
Minimum Hole Size0.25mm
Blind viasNo
Finished board thickness5.1mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
Surface finishENIG
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment
Standard Thicknesses / CladdingsStandard Panel Sizes
0.015" (0.381mm) +/- 0.0015" 0.025" (0.635mm) +/- 0.0015" 0.030" (0.762mm) +/- 0.0015" 0.050" (1.270mm) +/- 0.0015" 0.060" (1.524mm) +/- 0.0015" 0.075" (1.900mm) +/- 0.0015"0.100" (2.500mm) +/- 0.0015" 0.125" (3.175mm) +/- 0.0015" 0.150" (3.810mm) +/- 0.0015" 0.200" (5.080mm) +/- 0.0015" 0.250" (6.350mm) +/- 0.0015" 0.500" (12.70mm) +/- 0.0015"18"X 12" (457mm X 305mm) 18"X 24" (457mm X 610mm) *Additional panel sizes available
Electrodeposited Copper Foil ½ oz. (18um) HH/HH 1 oz. (35um) H1/H1 *Additional claddings such as heavy metal and unclad are available

叠层结构

Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm

Layer: Dielectric, Material: Rogers TMM10 Core, Thickness: 5.08 mm (200mil)

Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm

PCB 统计

  • Components: 26
  • Total Pads: 38
  • Thru Hole Pads: 21
  • Top SMT Pads: 17
  • Bottom SMT Pads: 0
  • Vias: 13
  • Nets: 2

应用领域

  • Chip Testers
  • Dielectric Polarizers and Lenses
  • Filters and Couplers
  • Global Positioning Systems Antennas
  • Patch Antennas
  • Power Amplifiers and Combiners
  • RF and Microwave Circuitry
  • Satellite Communication Systems
  • Type of artwork supplied: Gerber RS-274-X
  • Quality standard: IPC-Class-2
  • Availability: worldwide

制造能力

PCB Capability (TMM10)

PCB Material:Ceramic, Hydrocarbon, Thermoset Polymer Composites
Designation:TMM10
Dielectric constant:9.20 ± 0.23
Layer count:Single Layer, Double Layer, Multilayer, Hybrid PCB
Copper weight:1oz, 2oz
PCB thickness:15mil,20mil,25mil,30mil,50mil,60mil,75mil,100mil,125mil,150mil,200mil,250mil,275mil,300mil,500mil
PCB size:≤400mm X 500mm
Solder mask:Green, Black, Blue, Yellow, Red etc.
Surface finish:Bare copper, HASL, ENIG, Immersion Silver, Immersion Tin, ENEPIG, Pure Gold, OSP etc.

材料参数

TMM 10 Typical Properties

PropertyTMM 10Dir.UnitsConditionTest Method
Dielectric Constant (Process)9.20 ± 0.23Z—10 GHzIPC-TM-650 2.5.5.5
Dielectric Constant (Design)9.8Z——Microstrip
Dissipation Factor0.0022Z—10 GHzIPC-TM-650 2.5.5.5
Thermal Coefficient of Dk-38—ppm/°C-50 to 150°CIPC-TM-650 2.5.5.5
Volume Resistivity2 × 10⁸—MΩ·cmCondition AASTM D257
Surface Resistivity4 × 10⁷—MΩCondition AASTM D257
Moisture Absorption0.09—%D24/50ASTM D570
Thermal Conductivity0.76ZW/(m·K)50°CASTM D5470
CTE (X)21Xppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Y)21Yppm/°C-55 to 288°CIPC-TM-650 2.4.41
CTE (Z)20Zppm/°C-55 to 288°CIPC-TM-650 2.4.41
Copper Peel Strength5.0 (0.9)—lbs/in (N/mm)1 oz ED foilIPC-TM-650 2.4.8
Density2.8—g/cm³—ASTM D792
FlammabilityNon-FR———UL94

备注

Notes: ASTM E831 corresponds to IPC-TM-650, method 2.4.41 * estimated

Typical values are a representation of an average value for the population of the property. For specification values contact Rogers Corporation.

(1) Prolonged exposure in an oxidative environment may cause changes to the dielectric properties of hydrocarbon based materials. The rate of change increases at higher temperatures and is highly dependent on the circuit design. Although Rogers' high frequency materials have been used successfully in innumerable applications and reports of oxidation resulting in performance problems are extremely rare, Rogers recommends that the customer evaluate each material and design combination to determine fitness for use over the entire life of the end product.

(2) The design Dk is an average number from several different tested lots of material and on the most common thicknesses. If more detailed information is required, please contact Rogers Corporation. Refer to Rogers' technical paper "Dielectric Properties of High Frequency Materials" available on www.rogerscorp.com/acm.

(3) Method 2.5.5.6.

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com