面向基站功率放大器与小基站收发器的 RO4360G2 12mil ENEPIG 高频电路板
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
产品简介
Rogers RO4360G2 laminates are low loss, glass-reinforced, hydrocarbon ceramic-filled thermoset materials that provide the ideal balance of performance and processing capability. RO4360G2 laminates are the first high dielectric constant (Dk) thermoset laminate that can be processed similar to FR-4. These materials are lead-free process capable and offer better rigidity for improved processability in multi-layer board constructions, while reducing material and fabrication costs. RO4360G2 laminates can be paired with RO440 series prepreg and lower-Dk RO4000 laminate in multi-layer designs.
This 2-layer rigid PCB is constructed entirely with RO4360G2 as the core material at 12mil (0.305mm) thickness, with ENEPIG surface finish, green top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 6.15 offers excellent high-frequency performance, making it ideal for demanding applications such as base station power amplifiers, small cell transceivers, patch antennas, and ground-based radar.
Rogers RO4360G2 Material – Product Introduction
RO4360G2 laminates are 6.15 Dk, low loss, glass-reinforced, hydrocarbon ceramic-filled thermoset materials that provide the ideal balance of performance and processing ease. RO4360G2 laminates extend Rogers' portfolio of high performance materials by providing customers with a product that is lead-free process capable and offers better rigidity for improved processability in multi-layer board constructions, while reducing material and fabrication costs.
RO4360G2 laminates process similar to FR-4 and are automated assembly compatible. They have a low Z-axis CTE for design flexibility and have the same high Tg as all of the RO4000 product line. RO4360G2 laminates can be paired with RO4400 prepreg and lower-Dk RO4000 laminate in multi-layer designs.
RO4360G2 laminates, with a Dk of 6.15 (Design Dk 6.4), allow designers to reduce circuit dimensions in applications where size and cost are critical. They are the best value choice for engineers working on designs including power amplifiers, patch antennas, ground-based radar, and other general RF applications.
技术特性与优势
- Dielectric Constant (DK): 6.15 ± 0.15 at 10GHz/23°C
- Dissipation Factor (Df): 0.0038 at 10GHz/23°C
- Td: >407°C, High Tg greater than 280°C TMA
- High Thermal Conductivity: 0.75 W/mK
- Low Z-axis Coefficient of Thermal Expansion: 28 ppm/°C
- Copper Matched Coefficient of Thermal Expansion (-55 to 288°C): X axis 13 ppm/°C, Y axis 14 ppm/°C
- Lead Free Process Compatible
- 94V-0 Flammability Rating
- Processes similar to FR-4
- Automated assembly compatible
- Design Flexibility — Low Z-axis CTE for design flexibility
- Plated Through-Hole Reliability — High reliability for multi-layer board constructions
- Automated Assembly Compatible — Easy processing similar to FR-4
- Environmentally Friendly — Lead free process compatible
- Efficient Supply Chain — Short lead times make for cost effective material option
- High Thermal Conductivity — Efficient heat removal for power applications
- High Tg — Same high Tg as all of the RO4000 product line
- ENEPIG Finish — Excellent solderability, corrosion resistance, and wire bondability
- DK 6.15 ± 0.15 @ 10GHz:High dielectric constant for reduced circuit dimensions
- Df 0.0038 @ 10GHz:Low loss for high-frequency RF and microwave designs
- Td >407°C, Tg >280°C TMA:High thermal stability for demanding environments
- CTE: 13/14/28 ppm/°C:Copper matched CTE for reliable plated through holes
- Thermal conductivity 0.75 W/m/K:Efficient heat removal for power applications
- Processes similar to FR-4:Ease of fabrication and automated assembly compatible
- Lead free process compatible:Environmentally friendly manufacturing
- 94V-0 flammability:Safety compliance for electronic equipment
- ENEPIG finish:Excellent solderability, corrosion resistance, wire bondability
产品图片
规格参数
| Base material | Rogers RO4360G2 (Glass-reinforced hydrocarbon ceramic-filled thermoset) |
| Layer count | 2 layers |
| Board dimensions | 48.9mm x 95.4mm = 1 PCS |
| Minimum Trace/Space | 5/7 mils |
| Minimum Hole Size | 0.4mm |
| Blind vias | No |
| Finished board thickness | 0.4mm |
| Finished Cu weight | 1 oz (1.4 mils) outer layers |
| Via plating thickness | 20 μm |
| Surface finish | ENEPIG |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | Green |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
叠层结构
Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
Layer: Dielectric, Material: Rogers RO4360G2 Substrate, Thickness: 0.305 mm (12mil)
Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)
PCB 统计
- Components: 20
- Total Pads: 34
- Thru Hole Pads: 18
- Top SMT Pads: 16
- Bottom SMT Pads: 0
- Vias: 21
- Nets: 2
应用领域
- Base Station Power Amplifiers
- Small Cell Transceivers
- Patch antennas
- Ground-based radar
- General RF applications
- Power amplifiers and combiners
- Base Station Power Amplifiers
- Small Cell Transceivers
- Patch antennas
- Ground-based radar
- General RF applications
- Power amplifiers and combiners
材料参数
RO4360G2 Typical Properties
| Property | RO4360G2 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 6.15 ± 0.15 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 6.4 | Z | — | — | Microstrip |
| Dissipation Factor | 0.0038 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -131 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 4 × 10⁷ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 9 × 10⁶ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.08 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.75 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 13 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 28 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 5.2 (0.91) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 2.16 | — | g/cm³ | — | ASTM D792 |
| Flammability | V-0 | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
质量保证
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
