BICHENGPCBBicheng Technologies Limited

RF-10 电路板 2 层 125mil 高介电常数层压板,适用于微带贴片天线

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

RF-10 copper clad laminates are advanced composites made from ceramic-filled PTFE and woven fiberglass. They offer high dielectric constant and low dissipation factor, making them suitable for high-frequency applications. The thin fiberglass reinforcement enhances both rigidity and dimensional stability, which is essential for multilayer circuit manufacturing.

These laminates are designed to be a cost-effective substrate with reliable delivery times. RF-10 addresses the demand for size reduction in RF applications. It adheres well to smooth, low-profile copper, optimizing insertion losses at higher frequencies where skin effect losses become significant.

Dielectric Constant: 10.2 ± 0.3 at 10GHz Dissipation Factor: 0.0025 at 10GHz Thermal Conductivity: 0.85 W/mk (unclad) Coefficient of Thermal Expansion (CTE): -X: 16 ppm/°C -Y: 20 ppm/°C -Z: 25 ppm/°C Moisture Absorption: 0.08% Flammability Rating: V-0

High dielectric constant for compact RF circuit design Exceptional dimensional stability Tight dielectric constant tolerance (10.2 ± 0.3) Enhanced thermal management due to high thermal conductivity Strong adhesion to smooth copper surfaces Low expansion in X, Y, and Z directions Competitive price-to-performance ratio

Copper Layer 1: 35 μm (1 oz)RF-10 Core: 125 mil (3.175 mm)Copper Layer 2: 35 μm (1 oz)

Components: 12Total Pads: 20Through Hole Pads: 11Top SMT Pads: 9Bottom SMT Pads: 0Vias: 16Nets: 2

Microstrip Patch AntennasGPS AntennasPassive Components (filters, couplers, power dividers)Aircraft Collision Avoidance SystemsSatellite Components

RF-10 PCB 2-layer 125mil

规格参数

Board Dimensions45mm x 70mm (1 piece), ± 0.15mm
Minimum Trace/Space5/5 mils
Minimum Hole Size0.5mm
Blind ViasNone
Finished Board Thickness3.2mm
Finished Copper Weight2 oz (1.4 mils) on outer layers
Via Plating Thickness20 μm
表面处理Immersion Gold
Top SilkscreenWhite
Bottom SilkscreenNone
Top Solder MaskBlack
Bottom Solder MaskNone
Electrical Testing100% testing done before shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com