F4BTD350S 20mil 2 层沉金高导热 PTFE 陶瓷电路板
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
产品简介
(Note: Printed Circuit Boards are custom-made products. Images and parameters are for reference only.)
The F4BTD350S is a high thermal conductivity PTFE resin high-frequency substrate, reinforced with glass fiber cloth and containing a large amount of high thermal conductivity special ceramics. It features low loss and high thermal conductivity, and is a new generation of high-frequency materials developed for applications requiring low insertion loss and high heat dissipation efficiency. It can replace similar foreign products.
The excellent low loss and thermal conductivity performance increase the microwave power tolerance, extend the service life of devices, and make them more suitable for high-temperature and long-term operation, ensuring equipment reliability and low-cost maintenance. At the same time, the material has the advantages of low thermal expansion coefficient, dimensional stability, high electrical strength, and high insulation performance, making PCB processing easier, through-hole reliability higher, soldering faults lower, component matching better, and environmental adaptability stronger.
This 2-layer rigid PCB is constructed with F4BTD350S as the core material at 20mil (0.508mm) thickness, with ENIG (Electroless Nickel Immersion Gold) surface finish, black top solder mask, white top silkscreen, and 1oz copper on both sides. Its DK of 3.5 and ultra-low loss of 0.0016 make it ideal for high-power RF applications, power amplifiers, antennas, and industrial heating equipment.
The F4BTD350S is a high thermal conductivity PTFE resin high-frequency substrate, reinforced with glass fiber cloth and containing a large amount of high thermal conductivity special ceramics. It features low loss and high thermal conductivity, and is a new generation of high-frequency materials developed for applications requiring low insertion loss and high heat dissipation efficiency. It can replace similar foreign products.
The excellent low loss and thermal conductivity performance increase the microwave power tolerance, extend the service life of devices, and make them more suitable for high-temperature and long-term operation, ensuring equipment reliability and low-cost maintenance. At the same time, the material has the advantages of low thermal expansion coefficient, dimensional stability, high electrical strength, and high insulation performance, making PCB processing easier, through-hole reliability higher, soldering faults lower, component matching better, and environmental adaptability stronger.
The circuit boards can be processed using standard PTFE sheet technology. The excellent mechanical and physical properties of the sheet make it suitable for multi-layer, high multi-layer, and backplane processing. At the same time, it shows excellent processability in dense hole and fine line processing.
技术特性与优势
- Dielectric Constant (Dk): 3.5 ± 0.07 at 10GHz
- Dissipation Factor (Df): 0.0016 at 10GHz
- High Thermal Conductivity: 1.25 W/(M·K) — Exceptional heat dissipation for high-power applications
- CTE x-axis: 11 ppm/°C, CTE y-axis: 10 ppm/°C, CTE z-axis: 40 ppm/°C (-55°C to 288°C)
- Thermal Coefficient of Dk: -45 ppm/°C (-55°C to 150°C)
- Relative Tracking Index (CTI): 600V (23°C/50%/24H)
- Moisture Absorption: ≤0.05%
- Flammability: UL-94 V-0
- High Power Tolerance & Extended Device Service Life
- Radiation Resistance & Low Outgassing for aerospace applications
- ENIG Finish — Excellent solderability, corrosion resistance, and wire bondability
- High Thermal Conductivity (1.25 W/M·K) — Superior heat dissipation for high-power RF and microwave designs
- Low Loss (Df 0.0016 @ 10GHz) — Excellent high-frequency performance with minimal signal loss
- Stable DK (3.5 ± 0.07 @ 10GHz) — Consistent impedance control for high-frequency designs
- Increased Microwave Power Tolerance — Extends device service life and reliability
- Excellent Mechanical & Physical Properties — Suitable for multi-layer, high multi-layer, and backplane processing
- Low CTE & Dimensional Stability — Reliable plated through holes and dimensional stability
- High Electrical Strength & Insulation Performance — Superior reliability in demanding environments
- Radiation Resistance & Low Outgassing — Ideal for aerospace and defense applications
- Feature — Benefit
- DK 3.5 ± 0.07 @ 10GHz — Stable dielectric constant for consistent impedance control
- Df 0.0016 @ 10GHz — Ultra-low loss for high-frequency RF and microwave designs
- Thermal Conductivity 1.25 W/M·K — Exceptional heat dissipation for high-power applications
- CTE: 11/10/40 ppm/K — Matched to copper, reliable plated through holes
- TCDK: -45 ppm/°C — Low thermal coefficient of dielectric constant
- CTI: 600V — High tracking resistance for safety-critical applications
- Moisture Absorption ≤0.05% — Excellent stability in humid conditions
- UL 94 V-0 — Flame retardant for safety compliance
- High Power Tolerance — Extended device service life and reliability
- ENIG Finish — Excellent solderability, corrosion resistance, wire bondability
产品图片
规格参数
| Item | Specification |
| Base material | Wangling F4BTD350S (PTFE + Ceramic + Fiberglass) |
| Layer count | 2-layer (double sided) |
| Board dimensions | 79mm x 110mm = 1 PCS, ±0.15mm |
| Minimum Trace/Space | 7/9 mils |
| Minimum Hole Size | 0.6mm |
| Blind vias | No |
| Finished board thickness | 0.6mm (including copper) |
| Finished Cu weight | 1 oz (35 μm / 1.4 mils) all layers |
| Via plating thickness | 20 μm |
| Surface finish | ENIG (Electroless Nickel Immersion Gold) |
| Top Silkscreen | White |
| Bottom Silkscreen | No |
| Top Solder Mask | Black |
| Bottom Solder Mask | No |
| 100% Electrical test | Used prior to shipment |
| Parameter | Options |
| Dielectric Thickness Range | 0.127mm(5mil), 0.254mm(10mil), 0.508mm(20mil), 0.635mm(25mil), 0.762mm(30mil), 1.016mm(40mil), 1.270mm(50mil), 1.524mm(60mil), 2.03mm(80mil), 2.54mm(100mil), 3.175mm(125mil), 4.06mm(160mil), 5.08mm(200mil), 6.35mm(250mil) (± tolerance per thickness) |
| Thickness Increments | Available in 0.127mm (5mil) increments |
| Standard Panel Sizes | 305x460mm (12x18"), 460x610mm (18x24") |
| Standard Copper Cladding | 0.5oz (18μm), 1oz (35μm) — RTF low roughness copper foil |
| DK Value | 3.5 (F4BTD350S) |
| Aluminum/Copper Base Option | F4BTD***-AL, F4BTD***-CU for shielding/heat dissipation |
| Special Options | Contact Wangling for non-standard thicknesses and custom sizes |
叠层结构
Layer: Copper_layer_1 (Top), Material: Copper, Thickness: 35 μm (1 oz)
Layer: Dielectric, Material: F4BTD350S Core, Thickness: 0.508 mm (20mil)
Layer: Copper_layer_2 (Bottom), Material: Copper, Thickness: 35 μm (1 oz)
PCB 统计
Components: 18
Total Pads: 22
Thru Hole Pads: 10
Top SMT Pads: 12
Bottom SMT Pads: 0
Vias: 6
Nets: 2
应用领域
- High power radio frequency (RF) systems
- Power amplifiers and combiners
- Antennas (base station, satellite, phased array)
- Industrial heating equipment
- Couplers, filters, and power splitters
- Microwave and radar systems
- Aerospace and defense applications
材料参数
F4BTD350S Typical Properties
| Property | F4BTD350S | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical), 2 GHz | 3.52 | Z | — | 2 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Typical), 10 GHz | 3.50 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dk Tolerance | ±0.07 | — | — | — | — |
| Dielectric Constant (Design), 10 GHz | 3.62 | Z | — | 10 GHz | 50Ω microstrip line |
| Dissipation Factor, 2 GHz | 0.0012 | — | — | 2 GHz | — |
| Dissipation Factor, 10 GHz | 0.0016 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | -45 | — | ppm/°C | -55 to 150°C | IPC-TM-650 2.5.5.5 |
| Copper Peel Strength (1 oz Cu) | >0.8 | — | N/mm | 1 oz Cu foil | IPC-TM-650 2.4.8 |
| Volume Resistivity | 1×10¹¹ | — | MΩ·cm | C96/23/95 | IPC-TM-650 2.5.17.1 |
| Surface Resistance | 1×10¹² | — | MΩ | C96/23/95 | IPC-TM-650 2.5.17.1 |
| Electrical Strength (Z-direction) | 25 | — | KV/mm | 5 kW, 500 V/s | IPC-TM-650 2.5.6 |
| Breakdown Voltage (X/Y) | 38 | — | KV | 5 kW, 500 V/s | IPC-TM-650 2.5.6 |
| CTE (X, Y) | 11, 10 | X,Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 40 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Td (5% mass loss) | 500 | — | °C | TGA, 5% loss | IPC-TM-650 2.4.24.6 |
| Thermal Conductivity (Z) | 1.25 | Z | W/(m·K) | — | ASTM D5470 |
| Specific Heat | 0.8 | — | J/g·°C | — | — |
| Density | 2.21 | — | g/cm³ | Room temp | ASTM D792 |
| Water Absorption | 0.05 | — | % | 20±2°C, 24 h | IPC-TM-650 2.6.2.1 |
| Flammability | V-0 | — | — | — | UL 94 |
质量保证
- Type of artwork supplied: Gerber RS-274-X
- Accepted standard: IPC-Class-2
- Availability: Worldwide
- 100% Electrical test prior to shipment
