F4BM300 高频电路板 0.6mm PTFE 基板,2oz 铜厚、沉金
(PCB's are custom-made products, the picture and parameters shown are just for reference)
产品简介
This PCB features a square design with dimensions of 85 mm x 85 mm, utilizing a double-sided layout that contains two layers of copper. It is compatible with surface mount components, while through-hole components are not included in this design.
The layer stackup consists of a top layer made of 70 µm (2 oz) copper starting with 1 oz plating, complemented by a durable F4BM300 core material with a thickness of 0.508 mm. The bottom layer also incorporates 70 µm (2 oz) copper with plating, ensuring reliable performance.
The surface finish is immersion gold, which enhances solderability and provides excellent protection against corrosion. A black solder mask is applied to the top side of the PCB, offering both durability and a sleek appearance while safeguarding the underlying circuitry.
技术特性与优势
- Dielectric Constant (DK) Options: 2.17 to 3.0, customizable
- Low Loss: Enhanced performance
- PIM Performance: Excellent with F4BME
- Cost-Effective: Diverse sizes available
- Radiation Resistance
- Low Outgassing
产品图片
规格参数
F4BM300 High Frequency PCB 0.6mm PTFE substrates 2oz Copper With Immersion Gold
| PCB SIZE | 85 x 85mm = 1PCS |
| BOARD TYPE | Double sided PCB |
| Number of Layers | 2 layers |
| Surface Mount Components | YES |
| Through Hole Components | NO |
| Minimum Trace and Space: | 5 mil / 8 mil |
| Minimum / Maximum Holes: | 0.3 mm / 1.2 mm |
| Number of Drill Holes: | 79 |
| Number of Milled Slots: | 2 |
| Surface Finish | Immersion gold |
| Solder Mask Color: | Black |
| Final height of PCB: | 0.6 mm ±10% |
| TEST | 100% Electrical Test |
| SERVICE AREA | Worldwide, Globally |
叠层结构
- copper - 70um (1 oz+plate) TOP layer
- F4BM300 - 0.508mm
- copper - 70um(1 oz+plate) BOT Layer
应用领域
- Microwave and RF applications
- Radar systems
- Phase shifters and passive components
- Power dividers, couplers, and combiners
- Feed networks and phased array antennas
- Satellite communication and base station antennas
材料参数
F4BM300 Typical Properties
| Property | F4BM300 | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Typical), 10 GHz | 3.00 | — | — | 10 GHz | — |
| Dk Tolerance | ±0.06 | — | — | — | — |
| Dissipation Factor, 10 GHz | 0.0017 | — | — | 10 GHz | — |
| Dissipation Factor, 20 GHz | 0.0025 | — | — | 20 GHz | — |
| Thermal Coefficient of Dk | -80 | — | ppm/°C | -55 to 150°C | — |
| Peel Strength (F4BM, 1oz ED) | >1.8 | — | N/mm | 1 oz ED copper | — |
| Peel Strength (F4BME, 1oz RTF) | >1.6 | — | N/mm | 1 oz RTF copper | — |
| Volume Resistivity | ≥6×10⁶ | — | MΩ·cm | Room temp | — |
| Surface Resistivity | ≥1×10⁶ | — | MΩ | Room temp | — |
| Dielectric Strength (Z) | >30 | — | kV/mm | 5 kV, 500V/s | — |
| Dielectric Breakdown (X/Y) | >36 | — | kV | 5 kV, 500V/s | — |
| CTE (X, Y) | 12, 15 | X,Y | ppm/°C | -55 to 288°C | — |
| CTE (Z) | 95 | Z | ppm/°C | -55 to 288°C | — |
| Moisture Absorption | ≤0.08 | — | % | 20±2°C, 24 hrs | — |
| Density | 2.29 | — | g/cm³ | Room temp | — |
| Thermal Conductivity (Z) | 0.42 | Z | W/(m·K) | — | — |
| Continuous Operating Temp | -55 to +260 | — | °C | — | — |
| Flammability | V-0 | — | — | — | UL94 |
F4BM 高频板材
F4BM series laminates are made by scientifically formulating and strictly pressing a combination of fiberglass cloth, polytetrafluoroethylene resin, and polytetrafluoroethylene film. Its electrical performance is improved compared to the F4B series, primarily due to a wider range of dielectric constants, lower dielectric loss, increased insulation resistance, and improved stability.
