Wangling F4BME275 DK2.75 Df0.0015 PIM ≤-159dBc (0.2-12.0mm) RTF 覆铜板
产品简介
Wangling F4BME series are PTFE glass fabric copper-clad laminates that share the same dielectric layer as the F4BM series but utilize Reverse Treated Foil (RTF) copper. This configuration delivers excellent Passive Intermodulation (PIM) performance, more precise circuit control, and lower conductor loss, making it ideal for applications with stringent PIM requirements. F4BME275 is the variant with a dielectric constant of 2.75, featuring higher glass content for improved dimensional stability and lower CTE.
技术特性与优势
- 1.Selectable Dielectric Constant (Dk) from 2.17 to 3.0; Dk 2.75 with customizable options available
- 2.Low dissipation factor (Df 0.0015 @10GHz, 0.0021 @20GHz)
- 3.Excellent PIM performance (≤ -159 dBc) due to Reverse Treated Foil (RTF) copper
- 4.More precise line control and lower conductor loss
- 5.Good dimensional stability and enhanced size control (improved with higher glass content)
- 6.Radiation resistance and low outgassing
- 7.Commercial, high-volume, cost-effective production
- 8.UL 94 V-0 flammability rating
- 9.Long-term operating temperature: -55°C to +260°C
- 10.Very low moisture absorption (≤0.08%)
应用领域
- Microwave, RF, Radar
- Phase Shifters, Passive Components
- Power Dividers, Couplers, Combiners
- Feed Networks, Phased Array Antennas
- Satellite Communication, Base Station Antennas
- Applications requiring excellent PIM performance
典型性能参数:Wangling F4BME275
本表为材料本身的介电与机械特性,与上面的板级规格参数不同。
打开独立数据表(可打印)| Properties | Test Conditions | Unit | F4BME275 |
|---|---|---|---|
| Electrical Properties | |||
| Dielectric Constant (Typical) | 10 GHz | – | 2.75 |
| Dielectric Constant Tolerance | – | – | ±0.05 |
| Dissipation Factor (Typical) | 10 GHz | – | 0.0015 |
| — | 20 GHz | – | 0.0021 |
| Temperature Coefficient of Dk | -55°C to 150°C | ppm/°C | -92 |
| Peel Strength | 1 oz. F4BME | N/mm | >1.6 |
| Volume Resistivity | Normal Condition | MΩ·cm | ≥6×10⁶ |
| Surface Resistance | Normal Condition | MΩ | ≥1×10⁶ |
| Dielectric Strength (Z-direction) | 5 kW, 500 V/s | kV/mm | >28 |
| Breakdown Voltage (XY-direction) | 5 kW, 500 V/s | kV | >35 |
| PIM Performance | Only for F4BME series | dBc | ≤ -159 |
| Thermal & Mechanical Properties | |||
| CTE | XY-direction, -55°C to 288°C | ppm/°C | 14~16 |
| — | Z-direction, -55°C to 288°C | ppm/°C | 112 |
| Thermal Stress | 260°C, 10s, 3 cycles | – | No Delamination |
| Water Absorption | 20±2°C, 24 hours | % | ≤0.08 |
| Density | Room Temperature | g/cm³ | 2.28 |
| Long-term Operating Temperature | – | °C | -55 to +260 |
| Thermal Conductivity | Z-direction | W/(m·K) | 0.38 |
| Flammability Rating | – | UL-94 | V-0 |
| Material Composition | – | – | PTFE, Glass Fiber Cloth; F4BME uses Reverse Treated Foil (RTF) copper |
可选规格
- Copper Foil Options for F4BME: Reverse Treated Foil (RTF) Copper. Available thicknesses: 0.5 oz (0.018mm), 1 oz (0.035mm).
- Standard Panel Sizes Available:
- 460 × 610 mm
- 500 × 600 mm
- 850 × 1200 mm
- 914 × 1220 mm
- 1000 × 1200 mm
- Available Thicknesses & Tolerances (Conventional):
- Thickness (mm): 0.2 (core, minimum for Dk ≥2.7), 0.25, 0.5, 0.508, 0.762, 0.8, 1.0, 1.5, 1.524, 1.575, 2.0, 2.5, 3.0, 4.0, 5.0, 6.0, 8.0, 10.0, 12.0.
- Corresponding tolerances range from ±0.02mm to ±0.20mm.
- Note: For Dk ≥2.7, minimum core thickness is 0.2mm.
- F4BME Series with Metal Core (Aluminum/Copper Base):
- Models: F4BME*-AL (Aluminum base), F4BME*-CU (Copper base)
- Serves for shielding or heat dissipation
- Example: F4BME275-AL represents F4BME275 with aluminum base; F4BME275-CU represents F4BME275 with copper base
- Standard sizes available: 460×610 mm, 460×305 mm; other sizes upon request
