BICHENGPCBBicheng Technologies Limited

Rogers CLTE-MW DK2.94-3.02 Df0.0015 (0.003-0.010") 陶瓷填充 PTFE 层压板

产品简介

CLTE-MW laminates are ceramic-filled, woven glass reinforced PTFE composites developed to provide a cost-effective, high-performance material for circuit designers. This unique laminate system is well-suited for applications with thickness limitations due to either physical or electrical constraints. The seven available thickness options from 0.003" to 0.010" ensure ideal signal to ground spacing exists for today's 5G and other millimeter-wave designs. The laminates are reinforced with spread glass, which along with high filler loading helps minimize high-frequency glass weave effects on electromagnetic wave propagation.

技术特性与优势

  1. 1.Available in ultra-thin thicknesses: 0.003" to 0.010" (seven options)
  2. 2.Ceramic-filled PTFE with spread glass reinforcement
  3. 3.Dielectric Constant range: 2.94 to 3.02 ±0.04 (process), 3.03 to 3.10 (design)
  4. 4.Low dissipation factor: 0.0015 @ 10 GHz
  5. 5.Low z-axis CTE: 30 ppm/°C for excellent plated through hole reliability
  6. 6.Low moisture absorption: 0.03%
  7. 7.High thermal conductivity: 0.42 W/(m·K)
  8. 8.High dielectric strength: 630 V/mil
  9. 9.UL 94 V-0 flammability rating
  10. 10.Excellent dimensional stability
  11. 11.Low outgassing (NASA compliant)

应用领域

  • Amplifiers
  • Antennas
  • Baluns
  • Couplers and Filters
  • 5G infrastructure
  • Millimeter-wave applications
  • Commercial and Consumer electronics
  • Defense and Aerospace systems
Rogers CLTE-MW Laminate

典型性能参数:Rogers CLTE-MW

本表为材料本身的介电与机械特性,与上面的板级规格参数不同。

打开独立数据表(可打印)
Rogers CLTE-MW
PropertyTypical Value¹UnitsTest ConditionsTest Method
Electrical Properties
Dielectric Constant (process)2.94 to 3.02 ± 0.04-23°C @ 50% RH, 10 GHzIPC TM-650 2.5.5.5
Dielectric Constant (design)3.03 to 3.10-C-24/23/50, 8-40 GHzMicrostrip Differential Phase Length
Dissipation Factor0.0015-23°C @ 50% RH, 10 GHzIPC TM-650 2.5.5.5
Thermal Coefficient of Dk-35ppm/°C0 to 100°C, 10 GHzIPC TM-650 2.5.5.5
Volume Resistivity1.3 x 10⁷MΩ·cmC96/35/90IPC TM-650 2.5.17.1
Surface Resistivity2.5 x 10⁶MΩC96/35/90IPC TM-650 2.5.17.1
Electrical Strength630V/mil-IPC TM-650 2.5.6.2
Dielectric Breakdown44kVD-48/50IPC TM-650 2.5.6
Comparative Tracking Index600V / PLC 0class/voltsC-40/23/50UL-746A, ASTM D6054
Thermal Properties
Decomposition Temperature (Td)500°C2hrs @ 105°C, 5% Weight LossIPC TM-650 2.3.40
Coefficient of Thermal Expansion - x8ppm/°C-55°C to 288°CIPC TM-650 2.4.41
Coefficient of Thermal Expansion - y8ppm/°C-55°C to 288°CIPC TM-650 2.4.41
Coefficient of Thermal Expansion - z30ppm/°C-55°C to 288°CIPC TM-650 2.4.24
Thermal Conductivity0.42W/(m·K)Z DirectionASTM D5470
Time to Delamination>60minutesas-received, 288°CIPC TM-650 2.4.24.1
Mechanical Properties
Copper Peel Strength1.1 (6.0)N/mm (lbs/in)10s @ 288°C, 35 μm foilIPC TM-650 2.4.8
Flexural Strength (MD, CMD)113, 99 (16.4, 14.4)MPa (ksi)25°C ± 3°CASTM D790
Tensile Strength (MD, CMD)83, 80 (12.0, 11.6)MPa (ksi)23°C @ 50% RHASTM D3039/D3039-14
Flex Modulus (MD, CMD)6468, 6360 (938.1, 922.4)MPa (ksi)25°C ± 3°CIPC TM-650 2.4.4
Dimensional Stability (MD, CMD)0.22, 0.22mil/inchafter etch + bakeIPC-TM-650 2.4.39a
Physical Properties
FlammabilityV-0--UL 94
Moisture Absorption0.03%E1/105 + D48/50IPC TM-650 2.6.2.1
Density2.1g/cm³C24/23/50ASTM D792
Specific Heat Capacity0.93J/g·°K2 hours at 105°CASTM E2716
NASA Outgassing
Total Mass Lost0.03%TML/CVCMASTM E595
Collected Volatiles<0.01%—ASTM E595

可选规格

  • Standard Thicknesses:
  • 0.003" (0.076 mm) ± 0.0005"
  • 0.004" (0.102 mm) ± 0.0005"
  • 0.005" (0.127 mm) ± 0.0007"
  • 0.006" (0.152 mm) ± 0.0007"
  • 0.007" (0.178 mm) ± 0.0010"
  • 0.008" (0.203 mm) ± 0.0010"
  • 0.010" (0.254 mm) ± 0.0010"
  • Standard Panel Sizes:
  • 12" x 18" (305 x 457 mm)
  • 24" x 18" (610 x 457 mm)
  • Standard Claddings:
  • Reverse Treated Electrodeposited Copper Foil:
  • ½ oz. (18µm)
  • 1 oz. (35µm)
  • 2 oz. (70 µm)
  • Very Low Profile Electrodeposited Copper Foil:
  • ¼ oz. (9µm)
  • ½ oz. (18µm)
  • 1 oz. (35µm)
  • Additional claddings, thicknesses, panel sizes, and metal plate options (including resistive foil) available upon request.

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com