面向高频应用、采用 RO4003C 与 S1000-2M 的先进 8 层 HDI 混合电路板
(Custom PCBs are custom-made products, images and specifications are for reference only.)
产品简介
(Custom PCBs are tailored products; the images and specifications provided are for reference only.)
Rogers RO4003C materials are woven glass reinforced hydrocarbon/ceramics that provide the high-frequency performance of PTFE with the manufacturability of epoxy/glass. This low-loss material is suitable for RF microwave circuits and matching networks, allowing for competitive circuit fabrication.
RO4003C laminates are available in various configurations, using both 1080 and 1674 glass fabric styles, all meeting strict electrical performance specifications. The material is non-brominated and not UL 94 V-0 rated.
技术特性与优势
- Dielectric Constant: 3.38 ± 0.05 at 10 GHz
- Dissipation Factor: 0.0027 at 10 GHz
- Thermal Conductivity: 0.71 W/m/K
- Thermal Coefficient of Dielectric Constant: +40 ppm/°C (range -50°C to 150°C)
- CTE Matched to Copper: X-axis: 11 ppm/°C, Y-axis: 14 ppm/°C
- Low Z-axis CTE: 46 ppm/°C
- Glass Transition Temperature (Tg): > 280°C
- Low Moisture Absorption: 0.06%
- Low Z-axis CTE of 2.4 ppm/°C, excellent through-hole reliability
- High Tg of 185°C, suitable for lead-free applications
- Low moisture absorption of 0.08%, humidity resistance
- T260: 60 minutes, T288: 30 minutes
- UL 94-V0 flammability rating
产品图片
规格参数
| Board Type | 8 layers |
| Material Type | RO4003C + FR-4 Tg 170°C |
| Solder Mask | Both sides, Green |
| Silkscreen Print | Top side, White |
| Surface Finish | ENIG (Electroless Nickel Immersion Gold) |
| Total Board Thickness | 1.5mm ± 10% |
| Board Size | 87.5mm x 40.6mm (1 PCS) |
| Minimum Hole Size | 0.2mm |
| Solder Mask Thickness | 10µm |
| Minimum Dielectric Thickness | 100µm |
| Minimum Trace Line Width | 115µm |
| Minimum Spacing | 135µm |
| Blind Vias | Yes, between L1-L2 and L7-L8 |
| Buried Vias | Yes, between L2-L7 |
| Back Drilled Vias | Yes, between L1-L6 |
| Impedance Controlled | 50 ohm, differential pairs, Top layer, 4mil/4mil trace/gap, reference layer 2 |
| — | 100 ohm, differential pairs, Top layer, 5mil/6mil trace/gap, reference layer 2 |
| — | 50 ohm, single-ended, Top layer, 6mil trace, reference layer 2 |
| Via Filling | All 0.3mm vias filled and capped per IPC 4761 Type VII |
| Edge Plating | Required |
叠层结构
- Type:Copper;Layer No.:1;Thickness (µm):45;Specification:18µm base copper + 25µm plating
- Type:RO4003C;Layer No.:Core;Thickness (µm):203;Specification:IPC-4101/24;Copper;2;38
- Type:FR-4;Layer No.:Prepreg;Thickness (µm):100;Specification:IPC-4101/24;Copper;3;17
- Type:FR-4 S1000-2M;Layer No.:Core;Thickness (µm):240;Specification:IPC-4101/24;Copper;4;35
- Type:FR-4;Layer No.:Prepreg;Thickness (µm):100;Specification:IPC-4101/24;Copper;5;35
- Type:FR-4 S1000-2M;Layer No.:Core;Thickness (µm):240;Specification:IPC-4101/24;Copper;6;17
- Type:FR-4;Layer No.:Prepreg;Thickness (µm):100;Specification:IPC-4101/24;Copper;7;38
- Type:RO4003C;Layer No.:Core;Thickness (µm):200;Specification:IPC-4101/24
- Type:Copper;Layer No.:8;Thickness (µm):45;Specification:18µm base copper + 25µm plating
PCB 统计
- Components: 41
- Total Pads: 73
- Through Hole Pads: 35
- Top SMT Pads: 26
- Bottom SMT Pads: 12
- Vias: 57
- Nets: 6
应用领域
- Cellular Base Station Antennas
- RF Identification Tags
- Automotive Radar and Sensors
- LNBs for Direct Broadcast Satellites
- Computing, Communication, and Automotive Electronics
材料参数
RO4003C Typical Properties
| Property | RO4003C | Dir. | Units | Condition | Test Method |
|---|---|---|---|---|---|
| Dielectric Constant (Process) | 3.38 ± 0.05 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Dielectric Constant (Design) | 3.55 | Z | — | — | Microstrip / Differential Phase Length |
| Dissipation Factor | 0.0027 | Z | — | 10 GHz | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of Dk | +40 | — | ppm/°C | -50 to 150°C, 10 GHz | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 1.7 × 10¹⁰ | — | MΩ·cm | Condition A | IPC-TM-650 2.5.17.1 |
| Surface Resistivity | 4.2 × 10⁹ | — | MΩ | Condition A | IPC-TM-650 2.5.17.1 |
| Moisture Absorption | 0.04 | — | % | D48/50 | ASTM D570 |
| Thermal Conductivity | 0.71 | Z | W/(m·K) | 50°C | ASTM D5470 |
| CTE (X) | 11 | X | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Y) | 14 | Y | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| CTE (Z) | 46 | Z | ppm/°C | -55 to 288°C | IPC-TM-650 2.4.41 |
| Copper Peel Strength | 6.0 (1.05) | — | lbs/in (N/mm) | 1 oz ED foil | IPC-TM-650 2.4.8 |
| Density | 1.8 | — | g/cm³ | — | ASTM D792 |
| Flammability | Non-FR | — | — | — | UL94 |
| Lead-Free Process Compatible | Yes | — | — | — | — |
质量保证
- Type of Artwork Supplied: Gerber RS-274-X
- Accepted Standard: IPC-Class-2
- Availability: Worldwide
