BICHENGPCBBicheng Technologies Limited

4 层 TU-872 HDI 电路板,含盲孔/埋孔,沉金

(Custom PCBs are custom-made products, images and specifications are for reference only.)

产品简介

(Custom PCBs are tailored products; the images and specifications provided are for reference only.)

The 4-layer TU-872 HDI PCB is constructed from low dielectric constant/dissipation factor (DK/DF) FR-4 material, specifically the TU-872 SLK Sp. This PCB is designed with four copper layers, each measuring 1 oz, and features a coating of immersion gold along with a green solder mask. The final thickness of the PCB is 1.6mm ± 10%. Each panel consists of 16 pieces and incorporates a high-density interconnect (HDI) configuration, which includes blind vias from the top side to inner layer 1 and buried vias connecting inner layer 1 to inner layer 2. These boards are fabricated according to IPC-Class-2 standards and are vacuum packed for shipment.

产品图片

4-Layer TU-872 HDI PCB Top View

规格参数

ItemDescriptionRequirementActualResult
1. LaminateMaterial TypeFR-4 TU-872 SLK SpFR-4 TU-872 SLK SpACC
Tg170℃170℃ACC
SupplierTUTUACC
Thickness1.6±10% mm1.61-1.62mmACC
2. Plating thicknessHole Wall≥25µm26.51µmACC
Outer copper35µm40.21µmACC
Inner Copper30µm31.15µmACC
3. Solder maskMaterial TypeKuangshunKuangshunACC
ColorGreenGreenACC
Rigidity (Pencil Test)≥4H or above5HACC
S/M Thickness≥10 µm19.55µmACC
LocationBoth SidesBoth SidesACC
4. Component MarkMaterial TypeTAIYO/ IJR-4000 MW300IJR-4000 MW300ACC
ColorWhiteWhiteACC
LocationC/S, S/SC/S, S/SACC
5. ViasThrough holesYESL1-L4ACC
Blind viasYESL1-L2ACC
Buried viasYESL2-L3ACC
6. IdentificationUL MarkYESYESACC
Date CodeWWYY0421ACC
Mark LocationSolder SideSolder SideACC
7. Surface FinishMethodImmersion GoldImmersion GoldACC
Tin Thickness--ACC
Nickel Thickness3-6µm5.27µmACC
Gold Thickness0.05µm0.065µmACC
8. NormativenessRoHSDirective 2015/863/EUOKACC
REACHDirective 1907 /2006OKACC
9. Annular RingMin. Line Width (mil)7mil6.8milACC
Min. Spacing (mil)6mil6.2milACC
10. V-grooveAngle30±5º30ºACC
Residual thickness0.4±0.1mm0.38mmACC
12. FunctionElectrical Test100% PASS100% PASSACC
13. AppearanceIPC Class LevelIPC-A-600J & 6012D Class 2IPC-A-600J & 6012D Class 2ACC
Visual InspectionIPC-A-600J & 6012D Class 2IPC-A-600J & 6012D Class 2ACC
Warp and Twist≦0.7%0.32%ACC
14. Reliability TestTape TestNo PeelingOKACC
Solvent TestNo PeelingOKACC
Solderability Test265 ±5℃OKACC
Thermal Stress Test288 ±5℃OKACC
Ionic Contamination Test≦ 1.56 µg/c㎡0.58µg/c㎡ACC

应用领域

  • Radio Frequency: Suitable for RF applications where signal integrity is crucial.
  • Backpanel and High-Performance Computing: Ideal for advanced computing systems.
  • Line Cards and Storage: Essential for data storage devices and line cards.
  • Servers, Telecom, and Base Stations: Supports vital telecommunications equipment.
  • Office Routers: Provides reliable connectivity for office environments.

材料参数

TU-872 SLK Typical Properties

PropertyTU-872 SLKDir.UnitsConditionTest Method
Glass Transition Temp (Tg, DMA)220—°C—IPC-TM-650 2.4.24.4
Glass Transition Temp (Tg, DSC)200—°C—IPC-TM-650 2.4.25
Glass Transition Temp (Tg, TMA)190—°C—IPC-TM-650 2.4.24
Decomposition Temp (Td, 5% loss)340—°C—TGA
CTE (X/Y)12–15X/Yppm/°CE-2/105IPC-TM-650 2.4.24
CTE (Z)2.3Z%E-2/105IPC-TM-650 2.4.24
T26060—minE-2/105—
T28820—minE-2/105—
T3005—minE-2/105—
Dielectric Constant (Dk) @ 1 GHz4.0Z—E-2/105IPC-TM-650 2.5.5.9
Dielectric Constant (Dk) @ 5 GHz3.9Z—E-2/105—
Dielectric Constant (Dk) @ 10 GHz3.8Z—E-2/105—
Dissipation Factor (Df) @ 1 GHz0.008Z—E-2/105—
Dissipation Factor (Df) @ 5 GHz0.006Z—E-2/105—
FlammabilityV-0——E-24/125UL 94

高 Tg PCB

The thermal properties of the resin system are defined by the glass transition temperature (Tg), measured in degrees Celsius (°C). The Tg indicates the temperature at which the material transitions from a rigid, glassy state to a soft, rubbery state. For common epoxy resins (FR-4 grade), the Tg typically ranges from 115 to 130°C. Exceeding this temperature during soldering can cause the PCB to expand in the Z-axis direction, which may stress the copper walls of plated-through holes. The thermal expansion of epoxy resin is approximately 15 to 20 times greater than that of copper above Tg, leading to a risk of cracking in the hole walls. Below Tg, the expansion ratio is only three times, significantly reducing the risk of cracking.

PCBs with a Tg of 170°C or higher are classified as high Tg PCBs, while those with a Tg above 130°C are generally considered standard.

自有部分高 Tg 材料

MaterialTg (℃)Manufacturer
S1000-2M180Shengyi
TU-768170TU
TU-872 SLK Sp170TU
TU-883170TU
IT-180ATC175ITEQ
KB-6167F170KB
M6185Panasonic
Kappa 438280Rogers
RO4350B280Rogers
RO4003C280Rogers
RO4730G3280Rogers
RO4360G2280Rogers
4-Layer TU-872 HDI PCB Bottom View

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com