BICHENGPCBBicheng Technologies Limited

Wangling WL-CT440 2 层 0.8mm 沉金电路板 — 热固性高频应用

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
7-10 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

1. Introduction to Wangling WL-CT440 PCB

Wangling's WL-CT440 organic polymer ceramic fiberglass cloth-covered copper clad laminates are a thermosetting resin-based high-frequency materials. The composition of the dielectric layer includes hydrocarbon resin, ceramics, and fiberglass cloth. It exhibits low loss performance, meeting the requirements for high-frequency designs. PCB processing can be carried out using techniques similar to FR4 materials, making it simpler compared to PTFE materials and ensuring better stability and consistency in circuitry. It can be used as a substitute for similar foreign products.

The combination of hydrocarbon resin and composite ceramics provides excellent low loss, high-temperature resistance, and temperature stability characteristics. The series of materials have a stable temperature coefficient of dielectric constant and loss, low thermal expansion coefficient, and a high Tg value of above 280°C.

This 2-layer rigid PCB is constructed entirely with Wangling WL-CT440 as the core material, making it ideal for aerospace equipment, microwave antennas, early warning radar, airborne radar, phased array antennas, satellite communication, navigation, and power amplifier applications.

2. Key Features of Wangling WL-CT440 PCB

Dielectric constant of 4.10 at 10 GHz/23°C (design Dk: 4.38)

Dissipation factor of 0.0040 at 2 GHz and 0.0050 at 10 GHz

High thermal conductivity of 0.66 W/(m·K)

Matched to copper CTE: X-axis 14 ppm/°C, Y-axis 18 ppm/°C, Z-axis 35 ppm/°C

Electrical strength (Z direction) of 27 KV/mm

Breakdown voltage (XY direction) of 25 KV

Low dielectric constant tolerance and low loss

Hydrocarbon ceramic thermoset resin system for better PCB processability and heat resistance

Excellent temperature characteristics of Dk with minimal variation over temperature

CTE in X/Y direction matches copper; low Z-axis CTE ensures dimensional thermal stability and PTH reliability

High Tg > 280°C maintains dimensional stability and PTH quality at high temperatures

High thermal conductivity (0.66 W/(m·K)) outperforms comparable thermoplastic materials for high power applications

Commercializable, high volume, cost-effective product

Excellent radiation resistance maintains stable dielectric and physical properties after dose irradiation

Low outgassing performance meets aerospace vacuum requirements

FR4-compatible processing for easier manufacturing than PTFE materials

Better circuit stability and consistency

4. Wangling WL-CT440 PCB Construction Details

5. PCB Stackup (2-Layer Rigid Structure)

Aerospace equipment, space and cabin equipment, aircraft

Microwave, antenna, phase-sensitive antenna

9. Wangling WL-CT440 Thermoset High Frequency Laminate – Product Introduction

The WL-CT series offers dielectric constant options including 3.00, 3.30, 3.38, 3.48, 4.10, and 6.15. The series materials are available with ED copper foil or reverse treated RTF copper foil. RTF copper foil provides excellent PIM performance, reduces conductor loss, and minimizes insertion loss. RTF copper foil uses an adhesive backing treatment, adding 0.018mm (0.7 mil) to material thickness while ensuring good bonding strength. The series can also be configured with an aluminum base for high-frequency aluminum-based materials.

Circuit boards can be processed using FR4 board processing techniques. The excellent mechanical and physical properties of the material enable multiple lamination cycles, making it suitable for multilayer, high-multilayer, and backplane processing. It also demonstrates excellent machinability for dense hole and fine line processing.

The WL-CT series offers dielectric constants including: 3.00, 3.30, 3.38, 3.48, 4.10, 6.15.

14. Standard Thicknesses, Panel Sizes & Claddings

WL-CT440 minimum thickness is 0.254mm (10 mil), available in multiples of 0.254mm (10 mil). Note: WL-CT440 is only available with ED copper foil (RTF not supported).

Copper thickness: 0.5 oz (0.018 mm), 1 oz (0.035 mm); other thicknesses available by custom order

Copper foil types: ED copper foil, RTF copper foil (RTF is adhesive-backed, adds 0.018mm/0.7 mil to core thickness)

Aluminum base material provides shielding or heat dissipation. The aluminum base is applied on the opposite side of the dielectric layer from the copper foil.

WL-CT440 PCB 30mil ENIG Finish
CCL 99 WL-CT440

规格参数

Base materialWangling WL-CT440 (hydrocarbon + ceramic + fiberglass)
Layer count2-layer
Board dimensions89mm x 63.5mm = 1 PCS, +/- 0.15mm
Minimum Trace/Space4/6 mils
Minimum Hole Size0.2mm
Blind viasNo
Finished board thickness0.8mm
Finished Cu weight1 oz (1.4 mils) outer layers
Via plating thickness20 μm
表面处理Immersion gold (ENIG)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
100% Electrical testUsed prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com