BICHENGPCBBicheng Technologies Limited

面向高频射频/微波应用的 TP1020 2 层 4.1mm 厚沉金电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP-type laminates consists of ceramics and polyphenylene Oxide resin (PPO), without fiberglass reinforcement. The dielectric constant can be precisely adjusted by adjusting the ratio between ceramics and PPO resin. The production process is special, and it has excellent dielectric performance and high reliability. TP refers to the smooth surface material without copper cladding, TP-1 refers to the material with copper cladding on one side, and TP-2 refers to the material with copper cladding on both sides.

The dielectric constant can be arbitrarily selected within the range of 3 to 25 according to circuit requirements, and it is stable. Common dielectric constants include 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 9.8, 10.2, 11, 16, and 20. The dielectric loss is low, and the loss increases as the frequency increases, but the change is not significant within 10 GHz. The corresponding part numbers are TP300, TP440, TP600, TP615, TP920, TP960, TP980, TP1020 etc.

Dielectric constant (Dk) of 10.2±0.2 at 10GHz Dissipation factor of 0.0012 at 10GHz Low TCDK at -40 ppm/°C, -55°C to 150°C CTE x-axis of 40 ppm/°C, CTE y-axis of 40 ppm/°C, CTE z-axis of 55 ppm/°C, -55°C to 150°C Thermal conductivity of 0.67 W/mk Moisture absorption of 0.01% UL 94-V0

Adjustable dielectric constant (3-25 range) Excellent dielectric performance and high reliability No fiberglass reinforcement Stable electrical properties Low dielectric loss Special production process ensures quality

Copper layer 1 - 35 μm TP1020 Core - 4.0 mm (157.5mil) Copper layer 2 - 35 μm

Components: 2 Total Pads: 12 Thru Hole Pads: 8 Top SMT Pads: 4 Bottom SMT Pads: 0 Vias: 8 Nets: 2

Global Satellite Navigation System Missile-borne systems Fuze technology Miniaturized antenna

IPC-Class 2 compliant 100% electrical tested Global availability Gerber RS-274X support

TP1020 PCB

规格参数

Base MaterialTP1020
Layer CountDouble sided (2-layer)
Board Dimensions31mm x 31mm (±0.15mm)
Minimum Trace/Space7/9 mils
Minimum Hole Size0.6mm
Blind ViasNo
Finished Thickness4.1mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
表面处理Electroless Nickel Immersion Gold (ENIG)
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% tested prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com