Wangling TP1600 2 层 0.9mm 镀纯金电路板 — 高 Dk 微波应用
定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。
- 起订量
- 1PCS
- 交期
- 7-10 working days
- 包装
- Vacuum / Anti-static Packaging
- 付款方式
- T/T, Paypal
产品简介
TP1600 is a specialized high-frequency microwave composite dielectric copper-clad laminate (CCL). It belongs to the TP series, which uses a ceramic-filled polyphenylene oxide (PPO) resin matrix, no fiberglass reinforcement, formed via compression molding. The model number directly indicates its nominal dielectric constant of 16.0 (hence TP1600). The dielectric constant is precisely adjusted by modifying the ratio of ceramic to PPO resin. The production process is special, offering excellent dielectric properties and high reliability.
TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP series laminates is composed of ceramic and polyphenylene oxide (PPO) resin, without fiberglass reinforcement. The dielectric constant is precisely adjusted by modifying the ratio between ceramic and PPO resin. TP refers to non-clad smooth material, TP-1 refers to single-sided copper clad, and TP-2 refers to double-sided copper clad.
This 2-layer rigid PCB is constructed entirely with Wangling TP1600 as the core material, making it ideal for miniaturized antennas, RF/microwave filters, couplers, resonant cavities, aerospace, defense, satellite payloads, and navigation (Beidou) applications.
Dielectric constant (Dk/εr) of 16.0 ± 0.32 (16.0 ± 0.4 per data sheet)
Dissipation factor (Df/tanδ) of 0.0012 at 5 GHz (0.0015 typical)
TcDk (Temperature Coefficient of Dk) of -40 ppm/°C
High Dk with low and stable loss for compact antennas, resonant structures, and high-frequency matching networks
No fiberglass cloth: smooth surface, uniform electrical performance, avoids weave effect issues
Radiation-resistant and low outgassing for aerospace, satellite, and military applications
Long-term operating temperature: -100°C to +150°C
High Dk enables circuit size reduction for compact antenna designs
Low and stable loss ensures excellent high-frequency performance
No fiberglass reinforcement eliminates glass weave effect
Smooth surface provides uniform electrical performance
Easier machining than pure ceramics: drillable, turnable, grindable, etchable
Reliable copper-dielectric adhesion compared to vacuum-deposited ceramic substrates
Thermoplastic processing offers good yield and lower fabrication costs than alumina/AlN ceramics
Radiation-resistant for space applications
Low outgassing meets aerospace requirements
4. Wangling TP1600 PCB Construction Details
5. PCB Stackup (2-Layer Rigid Structure)
RF/microwave filters, couplers, resonant cavities
Aerospace, defense, satellite payloads, navigation (Beidou)
High-frequency sensor modules requiring stable high-Dk performance
Type of artwork supplied: Gerber RS-274-X
Reflow soldering max temperature ≤ 200°C (if used at all)
Material not suitable for 260°C thermal shock testing
Not recommended for standard multilayer lamination (use low-Tg prepregs only if necessary, after feasibility review)
Long-term use temperature: -100°C to +150°C (above 180°C may cause deformation, copper peeling, and electrical property changes)
10. Wangling TP1600 Ceramic-Filled PPO Laminate – Product Introduction
TP1600 is a specialized high-frequency microwave composite dielectric copper-clad laminate (CCL). It belongs to the TP series, which uses a ceramic-filled polyphenylene oxide (PPO) resin matrix, no fiberglass reinforcement, formed via compression molding. The model number directly indicates its nominal dielectric constant of 16.0. The dielectric constant is precisely adjusted by modifying the ratio of ceramic to PPO resin. The production process is special, offering excellent dielectric properties and high reliability.
TP material is a unique high-frequency thermoplastic material in the industry. The dielectric layer of TP series laminates is composed of ceramic and polyphenylene oxide (PPO) resin, without fiberglass reinforcement. The dielectric constant can be selected within the range of 3 to 25 according to circuit requirements, with common Dk values including 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11, 16, and 20. The material exhibits low dissipation factor with minimal variation up to 10 GHz.
The material offers excellent radiation resistance and low outgassing, making it ideal for Beidou navigation, missile-borne, fuze, and miniaturized antenna applications. Copper-to-dielectric adhesion is more reliable than vacuum-deposited coatings on ceramic substrates. The material is easy to machine (drilling, turning, grinding, shearing, etching) – a significant advantage over ceramic substrates.
PCB fabrication is convenient using standard thermoplastic processing methods, with high yield and much lower fabrication costs compared to ceramic substrates. Due to material characteristics, multilayer processing is generally not recommended. If multilayer processing is required, use low-temperature bonding films only after thorough feasibility review.
13. Dielectric Constant Options (TP Series)
TP series can provide dielectric constants from 3 to 25 as required, including: 3.0, 4.4, 6.0, 6.15, 9.2, 9.6, 10.2, 11, 16, 20.
15. Standard Thicknesses, Panel Sizes & Claddings
Standard Thicknesses (Total thickness with copper or dielectric thickness – customer must specify)
