BICHENGPCBBicheng Technologies Limited

面向射频微波应用的 TLX-0 2 层 20mil 沉金电路板

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

TLX series laminates are made using PTFE fiberglass composites, offering reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs.

TLX is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as:

Resistance to creep for PCBs bolted to a housing that encounters high levels of vibration during space launch High temperature exposure in engine modules Radiation resistance in space (see NASA's website for low outgassing materials) Resistance to extreme environments at sea for warship antennas Resistance to a wide temperature range for altimeter substrates during flight

TLX-0 is one the series materials with dielectric constant of 2.45 with tight tolerance of ±0.04.

Low Dielectric Constant: 2.45 ±0.04 at 10GHz Excellent Signal Integrity: Dissipation Factor of 0.0021 at 10GHz Environmental Resistance: Low moisture absorption of 0.02% Dimensional Stability: X axis CTE of 21 ppm/°C, Y CTE of 23 ppm/°C, Z CTE of 215 ppm/°C Mechanical Durability: Strong Peel strength of 12 lbs/in

Superior RF Performance: Excellent PIM Values in PCBs (measured at lower than -160 dBc) Reliable Operation: Excellent Mechanical & Thermal Properties Stable Electrical Characteristics: Low and Stable Dk, Tightly Controlled DK, Low DF Environmental Durability: Dimensionally Stable, Low Moisture Absorption Safety Certified: UL 94 V0 Rating Design Flexibility: For Low Layer Count Microwave Designs

5. PCB Stackup (2-Layer Rigid Structure)

Copper Layer 1 - 35 μm TLX-0 Core - 0.508 mm (20mil) Copper Layer 2 - 35 μm

Components: 32 Total Pads: 73 Thru Hole Pads: 51 Top SMT Pads: 22 Bottom SMT Pads: 0 Vias: 105 Nets: 2

Couplers, splitters, combiners, amplifiers, antennas and passive components Radar systems, mobile communications Microwave test equipment Microwave transmission devices and RF components

Artwork Format: Gerber RS-274-X Accepted Standard: IPC-Class-2 Availability: Worldwide

Taconic TLX-0 RF Microwave PCB

规格参数

Base MaterialTLX-0
Layer Count2-layer
Board Dimensions175mm × 90mm = 10PCS, ±0.15mm
Minimum Trace/Space5/7 mils
Minimum Hole Size0.3mm
Blind ViasNo
Finished Board Thickness0.6mm
Finished Cu Weight1oz (1.4 mils) outer layers
Via Plating Thickness20 μm
表面处理Immersion Gold
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Hole TreatmentHole plugged by solder mask ink (Green)
Electrical Test100% tested prior to shipment
Design StandardIPC-Class-2
Artwork FormatGerber RS-274-X
AvailabilityWorldwide

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com