BICHENGPCBBicheng Technologies Limited

Taconic TLX-0 2 层 20mil 低 Dk PTFE 电路板,HASL 表面处理

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

起订量
1PCS
交期
5-8 working days
包装
Vacuum / Anti-static Packaging
付款方式
T/T, Paypal

产品简介

TLX series laminates are made using PTFE fiberglass composites, offering reliability in a wide range of RF applications. This material is versatile due to its 2.45 - 2.65 DK range and available thicknesses and copper cladding. It is suitable for low layer count microwave designs.

TLX is a workhorse in the RF microwave substrate world where the fiberglass offers mechanical reinforcement wherever a substrate experiences severe environments such as:

Resistance to creep for PCBs bolted to a housing that encounters high levels of vibration during space launch High temperature exposure in engine modules Radiation resistance in space (see NASA's website for low outgassing materials) Resistance to extreme environments at sea for warship antennas Resistance to a wide temperature range for altimeter substrates during flight

TLX-0 is one the series materials with dielectric constant of 2.45 with tight tolerance of ± 0.04.

Dielectric Constant of DK 2.45 +/-0.04 at 10GHz Dissipation Factor of 0.0021 at 10GHz Low moisture absorption of 0.02% X axis CTE of 21 ppm/°C, Y CTE of 23 ppm/°C, Z CTE of 215ppm/°C Strong Peel strength of 12 lbs/in

Excellent PIM Values in PCBs (measured at lower than -160 dBc) Excellent Mechanical & Thermal Properties Low and Stable Dk for consistent circuit performance Dimensionally Stable for reliable fabrication Low Moisture Absorption for environmental stability Tightly Controlled DK (±0.04) Low DF (0.0021) for minimal signal loss UL 94 V0 Rating for flame retardancy Ideal for Low Layer Count Microwave Designs Proven performance in extreme environments: space, high temperature, radiation, marine, and wide temperature ranges

Copper layer 1 – 35 μm TLX-0 Core – 0.508 mm (20mil) Copper layer 2 – 35 μm

Components: 21 Total Pads: 58 Thru Hole Pads: 32 Top SMT Pads: 26 Bottom SMT Pads: 0 Vias: 67 Nets: 2

Couplers, splitters, combiners, amplifiers, antennas and passive components Radar systems, mobile communications Microwave test equipment Microwave transmission devices and RF components

Artwork supplied: Gerber RS-274-X Accepted standard: IPC-Class-2 Availability: Worldwide

Taconic TLX-0 2-Layer PCB

规格参数

Base MaterialTLX-0
Layer Count2-layer
Board Dimensions89mm × 46mm (±0.15mm)
Minimum Trace/Space4/5 mils
Minimum Hole Size0.2mm
Blind ViasNo
Finished Board Thickness0.6mm
Finished Cu Weight (Outer Layers)1oz (1.4 mils)
Via Plating Thickness20 μm
表面处理HASL
Top SilkscreenNo
Bottom SilkscreenNo
Top Solder MaskNo
Bottom Solder MaskNo
Electrical Test100% prior to shipment

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com