BICHENGPCBBicheng Technologies Limited

TC600 高导热电路板,沉金

定制产品,图片与规格仅供参考,具体以下单确认的图纸为准。

产品简介

Rogers TC600 is a premium PTFE-based composite laminate engineered with thermally conductive ceramic fillers and woven glass reinforcement. Designed for high-power RF applications, this material delivers best-in-class thermal conductivity (1.1 W/mK) while maintaining excellent dielectric stability (Dk=6.15). The 2-layer construction features 1oz copper layers and immersion gold finish, making it ideal for compact power amplifiers, microwave combiners, and avionics systems.

High Dielectric Constant: 6.15 (stable from 1.8MHz to 10GHz) Ultra-Low Loss: 0.0017-0.0020 dissipation factor Superior Thermal Management: 1.1 W/mK conductivity Temperature Stable: -75 ppm/°C ΔDk (-40°C to 140°C) Moisture Resistant: 0.03% absorption CTE Matched: 9/9/35 ppm/°C (X/Y/Z)

Copper layer 1 - 18 μm + 17μm plating TC600 - 1.524 mm (60mil) Copper layer 2 - 18 μm + 17μm plating

Components: 24 Total Pads: 141 Thru Hole Pads: 65 Top SMT Pads: 76 Bottom SMT Pads: 0 Vias: 101 Nets: 2

Artwork Format: Gerber RS-274-X Quality Standard: IPC-Class 2 Availability: Worldwide shipping

Thermal Performance: Reduces hot spots by 25-30% compared to standard materials Size Reduction: Enables 20% smaller PCB footprints versus lower Dk substrates Frequency Stability: <1% Dk variation across operating temperatures Reliability: Matches CTE of active components for durable solder joints

Microwave Combiner and Power Divider Boards in Avionics Applications Small Footprint Antennas Digital Audio Broadcasting (DAB) Antennas (Satellite Radio) GPS & Hand-held RFID Reader Antennas

规格参数

Base MaterialTC600
Layer ConfigurationDouble Sided
Board Dimensions76mm × 57mm (4 variants)
Dimensional Tolerance±0.15mm
Minimum Trace/Space4/5 mils
Minimum Hole Size0.3mm
Via TypeThrough-hole only (No Blind)
Finished Board Thickness1.6mm
Copper Weight (Outer Layers)1oz (35μm total)
Via Plating Thickness20μm
表面处理Immersion Gold
Silkscreen (Top/Bottom)None / None
Solder Mask (Top/Bottom)None / None
Quality Assurance100% Electrical Tested

把板子告诉我,4 小时内回复

Gerber 文件太大可以直接发邮件,这个表单先把需求交给对应的工程师。

提交需求

或把资料发到rfq@bichengcircuits.com